The Paton Welding Journal, 2009, №03



2009 №03 (07)

2009 №03 (09)

---

TPWJ, 2009, #3, 28-31 pages

DEVELOPMENT OF INERT-GAS WELDING (Review)

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 3, 2009 (March)
Pages                      28-31
 
 
Authors
A.P. LITVINOV
Priazovsky State Technical. University, Mariupol, Ukraine
 
 
Abstract
The history of origination and development of inert-gas arc welding is considered. Its appearance was based on application of atomic-hydrogen welding and submerged-arc welding. The first TIG and MIG welding processes were developed at the beginning of the 1940s, and were applied in aluminium structure fabrication. In subsequent years, the methods for controlling metal transfer into the weld pool were developed, and different technologies for welding nonferrous metals and alloys were elaborated.
 
 
Keywords: welding fabrication, arc welding, inert-gas welding, pulsed-arc welding, special steel, aluminium alloy, titanium alloy, TIG welding, MIG welding, aircraft and rocket engineering, engineering history
 
 
Received:                12.06.08
Published:               28.03.09
 
 
References
1. Brodsky, A.Ya. (1956) Argon tungsten-arc welding. Moscow: Mashgiz.
2. Petrov, A.V. (1961) Technology of inert-gas arc welding: Refer. Book. Ed. by E.V. Sokolov. Vol. 2. Moscow: Mashgiz.
3. Russo, V.L. (1962) Inert-gas arc welding of aluminium alloys. Leningrad: Sudpromgiz.
4. (1985) Metals science of aluminium alloys. Ed. by S.T. Kishkin. Moscow: Nauka.
5. (1985) Current problems of welding nonferrous metals: Proc. of 11th All-Union Conf. Kiev: Naukova Dumka.
6. Welson, R.A. (1961) Vapor-shielded arc welding at 200 imp. Welding J., 1, 13.
7. Langmuir, I. (1923) The pressure effect in gaseous discharge. J. Franklin Institute, 11, 751-762.
8. (1969) An industry in retrospect 50 year progress. Welding J., 4, 165-169.
9. Alexander, P.P. (1928) Stability of the welding arc. J. AIEE, 3, 48-53.
10. Campbell, W.J. (1946) The selection of welding processes. Welding J., 8, 704-706.
11. Bernard, A. (1966) Living pioneers. Ibid., 12, 62-63.
12. Alexander, P.P. (1932) Welding high carbon steel. J. AWS, 2, 8.
13. West, E.G. (1985) Aluminium welding in this century. In: The centenary of modern welding, 1885-1985. London: Welding Inst.
14. Mair, H. (1997) Entwicklung und Bedeutung technischer Gase in der Schweisstechnik. In: 100 Jahre DVS. Berlin.
15. Piper, T.R. (1942) Heliarc welding. Welding J., 11, 770-772.
16. Shanley, F.R., Fallon, C.T. (1946) Discussions on the heliarc welding process as applied in the aircraft industry. Ibid., 1, 32.
17. Houldcroft, P.T. (1952) The assembly of the aluminium alloy superstructure of them. Pt 1: «Queen Elizabeth». Weld. and Metal Fabr., 6, 228-229.
18. Maslov, G.A. (1948) To results of the meeting on welding operations in aircraft industry. Avtogennoe Delo, 2, 32-33.
19. Brodsky, A.Ya. (1948) Argon-arc welding of thin metals. Ibid., 10, 11-17.
20. Rabkin, D.M. (1953) New method of automatic welding of aluminium. Avtomatich. Svarka, 4, 45-50.
21. Berryman, J. (1950) For inert gas shielding argon or helium? Iron Age, 3, 155-157.
22. Rabkin, D.M., Gurevich, S.M., Bugrij, F.S. (1950) Welding of nonferrous metals. Kiev: Mashgiz.
23. Diebold, J.M. (1946) Fusion welding of sheet metal. Welding J., 8, 724-732.
24. Needham, J.C., Cooksey, S.J., Milner, P.R. (1960) Metal transfer in inert gas-shielded arc welding. British Welding J., 7(2), 101-104.
25. Petrov, A.V. (1954) Consumable-electrode inert-gas arc welding of stainless steels. Vestnik Mashinostroeniya, 9, 68-70.
26. Petrov, A.V. (1955) Fusion of electrode wire in argon-arc welding. Svarochn. Proizvodstvo, 2, 4-7.
27. Dyatlov, V.I. (1964) Elements of electrode metal transfer theory in electric arc welding. In: New problems of welding technique. Kiev: Tekhnika.
28. Paton, B.E., Zavadsky, V.A. (1954) Pulsed ignition of arc with the purpose of considerable lowering of welding transformer voltage. Avtomatich. Svarka, 4, 46-62.
29. Paton, B.E. (1963) Further development of systems of automatic control and regulation of welding processes. Ibid., 5, 1-6.
30. Paton, B.E., Potapievsky, A.G., Podola, N.V. (1964) Consumable electrode pulsed arc welding with programmed regulation of the process. Ibid., 1, 1-6.
31. Paton, B.E., Shejko, P.P. (1965) Transfer control in consumable electrode arc welding. Ibid., 5, 1-7.
32. Gurevich, S.M., Zamkov, V.N., Kushnirenko, N.A. (1965) Increase in penetration efficiency of titanium alloys during argon-arc welding. Ibid., 9, 1-4.
33. Alov, A.A., Shmakov, V.M. (1962) Argon-arc welding with additional argon flow. Svarochn. Proizvodstvo, 3, 13-16.
34. Petrov, A.V., Slavin, G.A. (1966) Study of technological possibilities of pulsed arc. Ibid., 2, 1-4.
35. Terry, C.A., Tyler, W.T. (1958) Inert-gas tungsten-arc welding. Weld. and Metal Fabr., 2, 58-61.
36. Needham, J.C., Carter, A.W. (1965) Material transfer characteristic with pulsed current. Welding J., 5, 229.
37. Trindade, E.M., Allum, C.J. (1984) Characteristics in steady and pulsed current GMAW. Weld. and Metal Fabr., 9, 264-272.
38. Shigaev, T.G. (1983) Methods of welding current modulation and devices for their implementation. Avtomatich. Svarka, 8, 51-55.
39. Wilson, J.L., Claussen, G.E., Jackson, C.E. (1956) The effect of I2R heating on electrode melting rate. Welding J., 1, 1-8.
40. Yushchenko, K.A., Pustovit, A.I. (1979) Welding of highstrength cold-resistant steel 03Kh12N10MT. Avtomatich. Svarka, 1, 55-56.
41. (1980) Survey on the application of pulsed currents with the TIG process. Welding in the World, 3/4, 61-66.
42. Mandelberg, S.L., Gordonny, V.G. (1961) Single-sided two layer argon-arc welding of alloy steel plate. Avtomatich. Svarka, 9, 18-23.
43. Makara, A.M., Kushnirenko, B.N. (1967) Transverse displacements of the arc as a factor of improvement of welded joint structure. Ibid., 1, 31-35.
44. Iversen, K., Schellong, B. (1983) Vielfach die bessere Loesung Wolframinertgasschweissen von Aluminium mit wechselnder Polung. Praktiker, 9, 400, 402.
45. Paton, B.E., Voropaj, N.M. (1979) Activated consumable electrode shielding-gas welding. Avtomatich. Svarka, 1, 1-7, 13.
46. Makara, A.M., Mosendz, N.A. (1971) Welding of highstrength steels. Kiev: Tekhnika.
47. Savitsky, M.M., Leskov, G.I. (1980) Mechanism of the influence of electronegative elements on arc penetrability with tungsten electrode. Ibid., 9, 17-22.
48. Simonik, A.G., Petviashvili, V.I., Ivanov, A.A. (1976) Contraction effect of arc discharge at introduction of electronegative elements. Svarochn. Proizvodstvo, 3, 49-51.
49. Ostrovsky, O.E., Kryukovsky, V.N., Buk, B.B. et al. (1977) Effect of activated fluxes on penetrability of the welding arc and energy concentration in the anode spot. Ibid., 3, 3-4.
50. Paton, B.E., Zamkov, V.N., Prilutsky, V.P. et al. (2000) Arc contraction by flux in tungsten-electrode argon-arc welding. Avtomatich. Svarka, 1, 1-8.
51. Yushchenko, K.A., Kovalenko, D.V., Kovalenko, I.V. (2001) Application of activators for TIG welding of steels and alloys. The Paton Welding J., 7, 37-43.
52. Lucas, W. (2000) Activating flux - improving the performance of the TIG process. Weld. and Metal Fabr., 2, 7-10.
53. Gordon, J.R. (1995) Perspectives on welding research and development in the USA. Welding Review Int., 8, 95-106.
54. (2001) Welding and joining technologies in XXI century. J. JWS, 70(3), 6-18.
55. Zamkov, V.N., Prilutsky, V.P. (2004) Theory and practice of TIG-F (A-TIG) welding (Review). The Paton Welding J., 9, 11-14.
56. Gage, R.M. (1960) The plasma-arc torch: a new research tool. Electric Manufacture, 1, 144-146.
57. Dudko, D.A., Lakiza, S.P. (1960) About new possibilities of welding with high-temperature arc constricted by gas flow. Avtomatich. Svarka, 11, 38-46.
58. (1979) Microplasma welding. Ed. by B.E. Paton. Kiev: Naukova Dumka.
59. Dudko, D.A., Kornienko, A.N. (1968) Welding of aluminium-magnesium alloys by AC plasma arc. In: Cutting, surfacing and welding by constricted arc. Moscow: TsIINTI-Neftekhimmash.
60. Dolotov, B.I. (2004) Welding with immersed tungsten electrode. Mashinostroenie, 1, 20-24.
61. Blashchuk, B.E., Boeva, G.E., Langer, N.A. (1985) Application of argon-arc welding with electromagnetic stirring in manufacturing chemical apparatuses from titanium alloys. In: Current problems of nonferrous metals. Kiev: Naukova Dumka.
62. Zamkov, V.N., Topolsky, V.F., Kushnirenko, N.A. (1978) Tungsten-electrode double-arc welding of plate titanium. Avtomatich. Svarka, 2, 44-47.
63. Rabkin, D.M., Ivanova, O.N., Steblovsky, B.A. et al. (1971) Welding of aluminium alloys at straight polarity direct current. Ibid., 3, 71-72.
64. Budnik, V.P., Steblovsky, B.A., Buzko, M.G. (1982) Penetrability of DC and AC arc. Ibid., 8, 68-71.

---