The Paton Welding Journal, 2014, №06



2014 №06 (25)

DOI of Article 10.15407/tpwj2014.06.26

2014 №06 (27)

---

The Paton Welding Journal, 2014, #6-7, 124-127 pages  

APPLICATION OF PULSE ATOMIZING JET IN ELECTRIC ARC METALLIZING

V.A. ROYANOV¹ and V.I. BOBIKOV²

¹Priasovsky State Technical University. 7 Universitetskaya Str., 87500, Mariupol, Donetsk region, Ukraine. E-mail: royanov@pstu.ed
²Company «Azovobshchemash». 1 Mashinostroitelej Str., 87535, Mariupol, Donetsk region, Ukraine. E-mail: voffka-008@mail.ru
 
 
Abstract
The paper presents the results of investigation of pulse atomizing air jet application in electric arc metallizing. To ensure the pulsed mode, the respective device was developed allowing control of outflowing of a jet with frequency within 0-130 Hz. Oscillograms of variation of dynamic pressure are given. Dependence of pulse atomizing air jet on frequency of closing the spray gun nozzle channel is shown. Coating microstructures are given. Influence of pulsation frequency on composition of coatings spray-deposited with PP-MM-2 wire is shown. 15 Ref., 6 Figures.
 
 
Keywords: arc metallizing, pulsed mode, atomizing air jet, spray gun nozzle channel, coating microstructure, outflow, stationary discontinuity, jet dynamic pressure
 
 
Received:                05.05.14
Published:               28.09.14
 
References
1. Korobov, Yu.S. (2004) Estimation of forces affecting spray metal in electric arc metallizing. The Paton Welding J., 7, 21-25.
2. Royanov, V.A. (1990) Melting of electrodes in electric arc metallizing. Svarochn. Proizvodstvo, 2, 35-37.
3. Borisov, Yu.S., Vigilanskaya, N.V., Demianov, I.A. et al. (2013) Investigation of dispersion of dissimilar wire materials during electric arc metallizing. The Paton Welding J., 2, 24-30.
4. Korobov, Yu.S., Boronenkov, V.N. (2003) Kinetics of interaction of sprayed metal with oxygen in electric arc metallizing. Svarochn. Proizvodstvo, 7, 30-36.
5. Hasui, A. (1975) Technique of metallizing. Moscow: Mashinostroenie.
6. Konstantinov, V.M., Gubanov, A.S. (2007) Effect of alloying elements of steel wire on structure and properties of coatings in electric arc metallizing. Svarochn. Proizvodstvo, 5, 13-18.
7. Boronenkov, V.N., Korobov, Yu.S. (2012) Principles of electric arc metallizing. Physical-chemical principles. Ekaterinburg: UralSU.
8. Katz, N.V. (1966) Spray coating. Moscow: Mashinostroenie.
9. Ter-Danielian, B.I., Krasnichenko, L.V. (1983) New spray head of arc spray gun. Svarochn. Proizvodstvo, 12, 30-32.
10. Buryakin, A.V. (2000) Stationary arc spray gun EM-19. Ibid., 9, 35-36.
11. Royanov, V.A., Mosienko, G.A., Semyonov, V.P. et al. Atomizing spray head. USSR author's cert. 1787049. Int. Cl. B 05 B 7/22. Fil. 22.11.89. Publ. 07.01.93.
12. Borisov, Yu.S., Ilienko, A.G., Astakhov, E.A. et al. Device for arc metallizing. USSR author's cert. 1727923. Int. Cl. B 05 B 7/22. Fil. 26.06.89. Publ. 23.04.92.
13. Ginzburg, A.P. (1968) Aerogasdynamics. Moscow: Vysshaya Shkola.
14. Royanov, V.A., Tsygankov, S.A., Bogoslovsky, A.S. (1990) Flux-cored wire for deposition of wear-resistant coatings by arc spaying. In: Transact. of TsNIIT-MASh, 25-26.
15. Kudinov, V.V., Bobrov, G.V. (1992) Metallizing of coatings. Theory, technology and equipment: Manual for inst. of higher education. Moscow: Metallurgiya.

---

Suggested Citation

V.A. ROYANOV and V.I. BOBIKOV (2014) APPLICATION OF PULSE ATOMIZING JET IN ELECTRIC ARC METALLIZING. The Paton Welding J., 06, 124-127.

---