Print

2014 №06 (27) DOI of Article
10.15407/tpwj2014.06.28
2014 №06 (29)

The Paton Welding Journal 2014 #06
The Paton Welding Journal, 2014, #6-7, 132-134 pages  

MATERIALS FOR STRENGTHENING OF GAS TURBINE BLADES

A.M. KOSTIN1, A.Yu. BUTENKO1 and V.V. KVASNITSKY2


1Adm. S.O.Makarov National Shipbuilding University. 9 Geroev Stalingrada Ave., 54025, Nikolaev, Ukraine. E-mail: kostin.weld@gmail.com
2NTTU «Kiev Polytechnic Institute». 6/2 Dashavskaya Str., 03056, Kiev, Ukraine
 
 
Abstract
The advantages and disadvantages of existing technologies for strengthening the contact surfaces of working blades of gas turbines applying cast rods of stellite, nickel alloy KBNKhL-2 and plates of alloy KhTN-61 were studied. The necessity of development of new wear-resistant material for strengthening the shroud platforms of working blades was grounded. Two pilot alloys on the cobalt base of Co-Si-B and Co-Si-B-Cr3C2 systems were investigated. The high temperature wear resistance of materials was evaluated. 3 Tables, 1 Figure.
 
 
Keywords: surfacing, blades of gas turbines, strengthening technology, stellite, nickel alloy, cobalt-based alloy, high temperature wear resistance
 
 
Received:                25.04.14
Published:               28.09.14
 
 

Suggested Citation

A.M. KOSTIN, A.Yu. BUTENKO and V.V. KVASNITSKY (2014) MATERIALS FOR STRENGTHENING OF GAS TURBINE BLADES. The Paton Welding J., 06, 132-134.