Print

2011 №02 (11) 2011 №02 (02)

The Paton Welding Journal 2011 #02
The Paton Welding Journal, 2011, #2, 2-6 pages  

ASSESSMENT OF DEFORMABILITY OF PIPE STEEL JOINTS MADE BY AUTOMATIC CONTINUOUS FLASH-BUTT WELDING

S.I. KUCHUK-YATSENKO1, V.I. KYRIAN1, B.I. KAZYMOV1 and V.I. KHOMENKO2


1E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
2CJSC «Pskovelektrosvar», Russia
 
 
Abstract
Peculiarities of formation of high quality flash-butt welded joints on pipes are analyzed. Factors affecting the results of impact tests of standard specimens are considered. Toughness properties of metal in the welding zone have been studied by using different impact test methods. It is shown that metal of as-welded joint made at optimum parameters has sufficiently high resistance to impact loads. Conditions for performing flash-butt welding and inspection of the joints providing high operating reliability of pipelines have been determined.
 
 
Keywords: flash-butt welding, pipelines, joint quality, impact testing methods, joint zone, impact toughness, operating reliability
 
 
Received:                ??.??.??
Published:               28.02.11
 
 
References
1. SP 105-34-96: Guidelines. Performance of welding operations and quality control of welded joints. Introd. 01.10.96.
2. API STANDARD 1104: Welding of pipelines and related facilities. 19 ed., Sept. 1999.
3. Kuchuk-Yatsenko, S.I. (1992) Flash-butt welding. Kiev: Naukova Dumka.
4. Kuchuk-Yatsenko, S.I., Kirian, V.I., Kazymov, B.I. et al. (2006) On methodology for control of fitness-for-purpose of flash-butt welded joints in pipelines. The Paton Welding J., 10, 2-6.
5. Kuchuk-Yatsenko, S.I., Kirian, V.I., Kazymov, B.I. et al. (2008) Peculiarities of impact toughness tests of automatic flash-butt welded joints on pipes. Ibid., 10, 5-10.
6. Kuchuk-Yatsenko, S.I., Zhemchuzhnikov, G.V., Kazymov, B.I. et al. (1980) Influence of flash-butt welding defects on strength of joints at low temperatures. Avtomatich. Svarka, 12, 1-3.
7. Kuchuk-Yatsenko, S.I., Lebedev, V.K. (1965) Continuous flash-butt welding. Kiev: Naukova Dumka.
8. Kuchuk-Yatsenko, S.I., Kazymov, B.I., Zagadarchuk, V.F. et al. (1984) Formation of mat spots in flash-butt welded joints. Avtomatich. Svarka, 11, 23-26.
9. Paton, B.E., Lebedev, V.K., Kuchuk-Yatsenko, S.I. (1979) Complex «Sever-1» for flash-butt welding of position welds of large diameter pipes. Ibid., 11, 41-45.
10. Mazur, I.I., Serafin, O.M., Karpenko, M.P. (1989) Resistance welding of pipelines: ways of improvement. Stroitelstvo Truboprovodov, 4, 8-11.
11. Kuchuk-Yatsenko, S.I., Lebedev, V.K. (1978) Continuous flash-butt welding. Kiev: Naukova Dumka.
12. Pisarenko, G.S., Novikov, N.V. (1970) About actual problems of investigation of carrying capacity of cryogenic pressure vessels. Problemy Prochnosti, 8, 3-12.
13. Bakshi, O.A., Kukin, A.G., Monoshkov, A.N. (1970) Method of evaluation of reliability of materials and welded joints operating at low temperature conditions. Ibid., 8, 70-73.
14. Rakhmanov, A.S., Zandberg, A.S. (1985) Impact toughness as the criterion for evaluation of brittleness of joints made by resistance welding. Stroitelstvo Truboprovodov, 10, 41-43.
15. Neuber, G. (1947) Stress concentration. Moscow: Gostekhizdat.
16. Troitsky, V.A., Radko, V.P., Yushchak, P.T. (1981) Ultrasonic control of quality of joints made by flash-butt welding. Avtomatich. Svarka, 4, 38-40.
17. Kuchuk-Yatsenko, S.I., Radko, V.P., Kazymov, B.I. et al. (1996) Complex control of joints made by flash-butt welding. Tekhnich. Diagnostika i Nerazrush. Kontrol, 4, 46-50.

Suggested Citation

S.I. KUCHUK-YATSENKO1, V.I. KYRIAN1, B.I. KAZYMOV1 and V.I. KHOMENKO2 (2011) ASSESSMENT OF DEFORMABILITY OF PIPE STEEL JOINTS MADE BY AUTOMATIC CONTINUOUS FLASH-BUTT WELDING. The Paton Welding J., 02, 2-6.