The Paton Welding Journal, 2012, №04



2012 №04 (05)

2012 №04 (07)

---

The Paton Welding Journal, 2012, #4, 31-36 pages  

HEAT-PROTECTING PROPERTIES OF THERMAL SPRAY COATINGS CONTAINING QUASI-CRYSTALLINE ALLOY OF THE Al-Cu-Fe SYSTEM

A.L. BORISOVA, Yu.S. BORISOV, E.A. ASTAKHOV, A.P. MURASHOV, A.N. BURLACHENKO and T.V. TSYMBALISTAYA

E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Given are the investigation results on heat-protecting properties of plasma and detonation coatings (two-layer and graded), in which ZrO₂ stabilised by Y₂O₃ is used as a ceramic component, and alloy Al-Cu-Fe containing the quasi-crystalline y-phase is used as a metallic component.
 
 
Keywords: plasma spraying, detonation spraying, zirconia, Al-Cu-Fe system quasi-crystalline alloy, thermal barrier coatings, internal combustion engine components
 
 
Received:                10.01.12
Published:               28.04.12
 
 
References
1. Iliushchenko, A.F., Ivashko, V.S., Okovity, V.A. et al. (1998) Thermal barrier coatings based on ZrO2. Minsk: NII PM.
2. Kolomytsev, P.T. (1991) High-temperature protective coatings for nickel alloys. Moscow: Metallurgiya.
3. Nikitin, M.D., Kulik, A.Ya., Zakharov, N.I. (1977) Thermal barrier and wear-resistant coatings for diesel components. Leningrad: Mashinostroenie.
4. Zhu, D., Miller, R.A. (1999) Thermal barrier coatings for advanced gas turbine and diesel engines. In: NASA/TM 209453.
5. Moskal, G. (2009) Thermal barrier coatings: characteristics of microstructure and properties. Generation and directions of development of bond. J. Achiev. in Mat. and Manufac. Eng., 37(2), 323-331.
6. Soltani, R., Samadi, H., Garcia, E. et al. (2005) Development of alternative thermal barrier coatings for diesel engines. In: Proc. of SAE Int. (Toronto, 2005), 1.
7. Buyukkaya, E., Engine, T., Cerit, M. (2006) Effects of thermal barrier coating on gas emissions and performance of a LNR engine with different injection timings and valve adjustments. Energy Conversion and Management, 47, 1298-1310.
8. Bailey, N., Mill, B., Whyman, P. (2011) New, low cost thermal barrier coating developed specifically for diesel engine applications to solve heat issues associated with 2013 Euro VI emissions introduction. Automotive Industry Today, 2.
9. Huttunen-Saarivirta, E. (2004) Microstructure, fabrication and properties of quasicrystalline Al-Cu-Fe alloys: a review. J. Alloys and Compounds, 363, 150-174.
10. Adeeva, L.I., Borysova, A.L. (2002) Quasi-crystalline alloys as a new advanced material for protective coatings. Fizyka i Khimiya Tv. Tila, 3(3), 454-464.
11. Borysova, A.L., Borysov, Yu.S., Adeeva, L.I. et al. (2005) Thermal spray coatings containing quasi-crystalline phase, properties and applications (Review). Ibid., 6(1), 124-136.
12. Haberkern, R., Lindqvist, P., Fritsch, G. (1993) Transport properties of quasicrystalline AlCuFe. J. Non-Crystalline Solids, 153/154, 303-307.
13. Edagawa, K., Kajiyama, K., Takeuchi, S. (1999) Thermal expansion and Gruneisen parameters of quasicrystals. Mat. Res. Soc. Symp. Proc., 553, 403-408.
14. Borisov, Yu.S., Borisova, A.L., Golnik, V.F. et al. (2007) Corrosion resistance of thermal spray coatings of quasi-crystalline phase-containing AlCuFe base alloys. The Paton Welding J., 2, 27-31.
15. Rudiger, A., Koster, U. (2000) Corrosion behavior of Al-Cu-Fe quasicrystals. Mat. Sci. and Eng., 294/296, 890-893.
16. Chungen Zhou, Rui Cai, Shengkai Gong et al. (2006) Hot corrosion of AlCuFeCr quasicrystalline coating on titanium alloys with NaCl deposit. Surface and Coatings Techn., 201, 1718-1723.
17. Massiani, Y., Ait Yaazza, S., Dubois, J.M. (1995) Electrochemical corrosion behaviour of quasicrystalline coatings in dilute acetic acid. In: Proc. of 5th Int. Conf. on Quasicrystals, 790-793.
18. Srinival, V., Barua, P., Chosh, T.B. et al. (2004) Oxidation behavior of Al-Cu-Fe nanoquasicrystal powders. J. Non-Crystalline Solids, 334/335, 540-543.
19. Yamasaki Michiaki, Tsai An Pang (2002) Oxidation behavior of quasicrystalline Al63Cu25Fe12 alloys with additional elements. J. Alloys and Compounds, 342, 473-476.
20. Sanchez, A., Garcia de Blas, F.J., Algaba, J.M. et al. (1999) Application of quasicrystalline materials as thermal barriers in aeronautics and future perspectives of use for these materials. Mat. Res. Soc. Symp. Proc., 553, 447-457.
21. Haugeneder, A., Eisenhammer, T., Mahr, A. et al. (1997) Oxidation of quasicrystalline and crystalline AlCuFe thin film in air. Thin Solid Films, 307, 120-125.
22. Dubois, J.M., Kang, S.S., Von Stebut, J. (1991) Quasicrystalline low-friction coatings. J. Mat. Sci. Lett., 10, 537-541.
23. Solderet, D.J., Krotz, P.D., Daniel, R.L. et al. (1995) Microstructure and wear behavior of quasicrystalline thermal sprayed coatings. In: Proc. of 8th Nat. Thermal Spray Conf. (Houston, Sept. 11-15, 1995), 627-632.
24. De Palo, S., Usmani, S., Sampath, S. et al. (1997) Friction and wear behavior of thermally sprayed Al-Cu-Fe quasicrystal coatings. Ibid., 135-139.
25. Galano, M., Audebert, F., Garcia Escorial, A. et al. (2009) Nanoquasicrystalline Al-Cu-Fe-based alloys. Pt 2: Mechanical properties. Acta Mater., 57, 5120-5130.
26. Goldman, A.I., Kelton, R.F. (1993) Quasicrystals and crystalline approximants. Amer. Phys. Soc. Rev. of Modern Physics, 65(1), 213-230.
27. Borisova, A.L., Tunik, A.Yu, Adeeva, L.I. et al. (2010) Thermal barrier multilayer plasma coatings ZrO₂-NiCrAlY. The Paton Welding J., 10, 22-28.
28. Borisova, A.L., Adeeva, L.I., Tunik, A.Yu. et al. (2010) Plasma ZrO₂ coatings with metallic bond coat of alloy AlCuFe. Ibid., 4, 25-29.
29. Astakhov, E.A., Kaplina, G.S., Kokorina, N.N. et al. (2009) Study of structure and phase composition of detonation thermal-barrier coatings from quasi-crystalline alloys. In: Proc. of Int. Conf. on Materials for Service in Extreme Conditions (Kiev, 29-30 Sept. 2009), 101-105.

---

Suggested Citation

A.L. BORISOVA, Yu.S. BORISOV, E.A. ASTAKHOV, A.P. MURASHOV, A.N. BURLACHENKO and T.V. TSYMBALISTAYA (2012) HEAT-PROTECTING PROPERTIES OF THERMAL SPRAY COATINGS CONTAINING QUASI-CRYSTALLINE ALLOY OF THE Al-Cu-Fe SYSTEM. The Paton Welding J., 04, 31-36.

---