The Paton Welding Journal, 2015, №04



2015 №04 (09)

DOI of Article 10.15407/tpwj2015.04.10

2015 №04 (11)

---

The Paton Welding Journal, 2015, #3/4, 69-73 pages  

Manufacture of coaxial copper-aluminium rods using explosion welding and drawing

A.G. Bryzgalin¹, L.D. Dobrushin¹, P.S. Shlensky¹, I.G. Lavrenko² and I.M. Romashko²

¹E.O. Paton Electric Welding Institute, NASU. 11 Bozhenko Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
²SE «Antonov». 1 Tupolev Str., 03082, Kiev, Ukraine. E-mail: info@antonov.com
 
 
Abstract
Replacement of copper during production of current-conducting busbars by aluminium clad with a thin layer of copper allows reducing metal intensity of products preserving the high electric conductivity. The technology of manufacture of coaxial copper-aluminium current-conducting rods using explosion welding and drawing was offered. The modes of heat treatment of rods after drawing were experimentally selected providing the required mechanical properties at a minimum number of forming intermetallics. The methods of calculation of sizes of initial billets providing obtaining the required geometric parameters of a product were described. The possibility of application of explosion reduction of billets instead of explosion welding is shown. 5 Ref., 2 Tables, 7 Figures.
 
 
Keywords: copper-aluminium rods, electric conductivity, explosion welding, drawing, bimetal
 
 
Received:               26.01.15
Published:               21.05.15
 
 
References
1. GOST 434-78: Wire of rectangular section and copper busbars for electric engineering purposes. Technical assignment.
2. Kudinov, V.M., Koroteev, A.Ya. (1978) Explosion welding in metallurgy. Moscow: Metallurgiya.
3. Lysak, V.I., Kuzmin, S.V. (2005) Explosion welding. Moscow: Mashinostroenie.
4. GOST 1579-93: Wire. Overbending tests.
5. GOST 7229-76: Cables, wires and cords. Method for determination of electric resistance of conductive cores and conductors.

---

Suggested Citation

A.G. Bryzgalin, L.D. Dobrushin, P.S. Shlensky, I.G. Lavrenko and I.M. Romashko (2015) Manufacture of coaxial copper-aluminium rods using explosion welding and drawing. The Paton Welding J., 04, 69-73.

---