The Paton Welding Journal, 2003, №06

2003 №06 (05)

2003 №06 (07)

---

The Paton Welding Journal, 2003, #6, 21-24 pages

On the influence of the speed of variation of electrode extension and arc length on arc sensor signal

G.A. Tsybulkin

E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
Physical principles are considered, which underlie the action of arc sensors. Analytical dependencies are given of welding current on the current distance between the torch edge and weld pool surface, as well as the speed of variation of this distance.
Keywords: arc welding, consumable electrode, welding operations, arc sensors

References

1. Sugitani, Y. (2000) Making best use of the arc sensor. J. JWS, 2, 46-50.
2. Dilthey, U., Stein, L., Oster, M. (1996) Through-the-arc sensing an universal and multipurpose sensor for arc welding automation. Int. J. Joining of Materials, 1, 6-12.
3. Inoue, K., Zhang, J., Kang, M. (1991) Analysis of detection sensitivity of arc sensor in welding process. Transact. ofJWRI, 2, 53-56.
4. Ushio, M. (1991) Sensors in welding. Ibid., 157-163.
5. Tsybulkin, G.A. (1994) Mathematical model construction in problems of adaptive control of arc welding. Avtomatich. Svarka, 1, 24-28.
6. Tsybulkin, G.A (1999) On evaluation of current electrode deviation from welded joint line. Ibid., 12, 53-54.
7. Tsybulkin, G.A. (1994) On problem of selection of the frequency of welding tool oscillation across axial line of welded joints. Ibia., 11, 24-26.
8. Paton, B.E., Lebedev, V.K. (1966) Electric equipment for arc and slag welding. Moscow: Mashinostroenie.
9. Zaruba, 1.1. (1966) CO2 welding. Kyiv: Tekhnika.
10. Potapievsky A.G. (1974) Consumable electrode gasshielded welding. Moscow: Mashinostroenie.
11. Lenivkin, V.A., Dyurgerov, N.G., Sagirov, Kh.N. (1989) Technological properties of welding arc in shielded gases. Moscow: Mashinostroenie.
12. Tsybulkin, G.A. (1994) Side correction of welding tool current position based on the continuous measurement of welding current. Avtomatich. Svarka, 7/8, 28-31.

---

Suggested Citation

G.A. Tsybulkin (2003) On the influence of the speed of variation of electrode extension and arc length on arc sensor signal. The Paton Welding J., 06, 21-24.

---