The Paton Welding Journal, 2012, №04



2012 №04 (06)

2012 №04 (08)

---

The Paton Welding Journal, 2012, #4, 37-41 pages  

CAPACITOR-DISCHARGE STUD WELDING IN VACUUM

B.E. PATON, D.M. KALEKO, A.R. BULATSEV and V.F. SHULYM

E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Given are the results of investigations into capacitor-discharge welding of studs of aluminium-magnesium alloy AMg3 and stainless steel 10Kh18N9T under conditions of medium and high vacuum. It is shown that a high-current short-time pulsed discharge, at which the major part of evaporated metal remains in the gap between the mating surfaces, can be used for vacuum butt welding of compact-section parts to a sheet material. It is experimentally proved that up to M6 diameter studs can be welded at pressure of 1.33 Pa with a static tensile strength value of the joints being equal to that of the stud material.
 
 
Keywords: capacitor-discharge welding in vacuum, arc discharge, stud welding, aluminium alloy, stainless steel, volt-ampere characteristics, macrostructure, mechanical properties
 
 
Received:                16.01.12
Published:               28.04.12
 
 
References
1. Paton, B.E. (2009) 25 years of welding in open space. The Paton Welding J., 7, 2-6.
2. (2003) Space: Technology, Materials, Structures. Ed. by B.E. Paton. London: Taylor & Francis.
3. Shulym, V.F., Lapchinsky, V.F., Demidov, D.L. et al. (2003) Peculiarities and further development of welding in space. In: Ibid., 42-49.
4. Masubuchi, K., Imakita, A., Miyake, M. (1988) An initial study of remotely manipulated stud welding for space applications. Welding J., 4, 25-34.
5. Kaleko, D.M., Kononets, B.I., Oseledko, N.N. et al. (1991) Unit K747MV for capacitor-discharge stud welding. Svarochn. Proizvodstvo, 6, 25-27.
6. Paton, B.E., Kubasov, V.N. (1970) Experiment on welding of metals in space. Avtomatich. Svarka, 5, 7-12.
7. Kaleko, D.M., Lebedev, V.K., Chvertko, N.A. (1999) Processes of welding using the arc discharge of the capacitors. Welding and Surf. Rev., Vol. 13. Amsterdam: Harwood Acad. Publ., 1-148.
8. Kaptsov, N.A. (1950) Electric phenomena in gases and in vacuum. Moscow; Leningrad: Gostekhteorizdat.

---

Suggested Citation

B.E. PATON, D.M. KALEKO, A.R. BULATSEV and V.F. SHULYM (2012) CAPACITOR-DISCHARGE STUD WELDING IN VACUUM. The Paton Welding J., 04, 37-41.

---