Print

2020 №05 (05) DOI of Article
10.37434/tpwj2020.05.06
2020 №05 (07)

The Paton Welding Journal 2020 #05
The Paton Welding Journal, 2020, #5, 34-40 pages
 

Automatic arc welding in manufacture and renovation repair of pipe elements of spirals of high-pressure heaters of NPP power units

L.M. Lobanov1, N.M. Makhlin2, V.Ye. Popov2, D.S. Oliyanenko2, O.V. Kovalyuk3


1E.O. Paton Electric Welding Institute of NAS of Ukraine, 11 Kazymyr Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
2SE «Scientific and engineering center of welding and control in the field of nuclear energy of Ukraine of E.O. Paton Electric Welding Institute of the NAS of Ukraine, 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: electro@paton.kiev.ua
3SE «Atomenergomash» of the SE NNEGC «Energoatom», 52 Promyslova Str., PO Box 306, 71503, Energodar, Ukraine. E-mail: office@aem.zp.ua

Abstract
The paper considers the possibility for applying automatic orbital welding using nonconsumable electrode in helium or plasma welding using the methods of autopressing or successive penetration to produce welded joints of pipe elements of spirals in high-pressure heaters. The results of testing this technology and the optimal modes of producing position welded joints of pipe elements in spirals of high-pressure heaters of NPP power units are presented. A description of technical proposals on creation of domestic welding equipment for implementation of the proposed technology was presented. It is shown that the use of the developed technology applying domestic equipment can significantly increase the labour efficiency when producing welded joints of pipe elements in spirals of high-pressure heaters and significantly improve their quality. 13 Ref., 3 Figures.
Keywords: high-pressure heaters, spirals of high-pressure heaters, automatic orbital welding, nonconsumable electrode, autopressing or successive penetration, constricted arc, helium arc or plasma welding, position butt joints of pipelines, plasmatron

Received 22.03.2020

References

1. Efimov, O.V., Pylypenko, M.M., Potanina, T.V. et al. (2017) Reactors and steam generatots of NPP power units: schemes, processes, materials, structures, models. Ed. by O.V. Efimov. Kharkiv, LLC «V spravi» [in Ukrainian].
2. Buongiomo, J. (2010) PWR Description. Massachusetts Institute of Technology.
3. Rules for device and safe operation steam and hot water pipelines for objects of atomic energy (Approved by Resolution Gosatomnadzor of Russia, No. 3 and Gosgortekhnadzor of Russia, No. 100, June 19,2003). Moscow, Gosatomnadzor of Russia [in Russian].
4. Makhlin, N.M., Vodolazsky, V.E., Popov, V.E. et al. (2018) Selectrion of welding technology in manufacture and restoration repair of spirals of high-pressure heaters of NPP power units. The Paton Welding J., 4, 37-43. https://doi.org/10.15407/tpwj2018.04.06
5. Bukarov, V.A. (2002) Technology of automatic shielded- arc welding. In: Welding in nuclear industry and power engineering. Trans. of NIKIMT. Moscow, Izd-vo AT,. 1, 149-210 [in Russian].
6. Ishchenko, Yu.S. (2018) Physico-technological principles of weld formation in arc welding process. Ibid., Vol. 2, 204-240 [in Russian].
7. Troitsky, V.A. (2006) Brief manual on quality control of welded joints. Kiev, Feniks [in Russian].
8. Lobanov, L.M., Vodolazsky, V.E., Makhlin, N.M. et al. (2017) Horizontal manipulator for arc welding of pipe structure parts. Positive decision on the application а2017 11752 from 01.12.2017 [in Russian].
9. Krivtsun, I.V., Demchenko, V.F., Krikent, I.V. et al. (2019) Effect of current and arc length on characteristics of arc discharge in nonconsumable electrode welding. The Paton Welding J., 5, 2-12. https://doi.org/10.15407/tpwj2019.05.01
10. Boyi, Wu, Krivtsun, I.V. (2019) Processes of nonconsumable electrode welding with welding current modulation (Review). Pt 1. Peculiarities of burning of nonstationary arcs with refractory cathode. Ibid., 11, 23-32. https://doi.org/10.15407/tpwj2019.11.05
11. Goloshubov, V.I. (2005) Welding power sources. In: Manual. Kyiv, Aristei [in Ukrainian].
12. Paton, B.E., Grigorenko, G.M., Shejko, I.V. (2013) Plasma technologies and equipment in metallurgy and foundry. Kiev, Naukova Dumka [in Russian].
13. Makhlin, N.M., Korotynskyi, O.E., Svyrydenko, A.O. (2013) Hardware and software complexes for automatic welding of permanent joints of pipelines of nuclear power plants. Nauka ta Innovatsii, 9(6), 31-45 [in Ukrainian]. https://doi.org/10.15407/scin9.06.031

Suggested Citation

L.M. Lobanov, N.M. Makhlin, V.Ye. Popov, D.S. Oliyanenko, O.V. Kovalyuk (2020) Automatic arc welding in manufacture and renovation repair of pipe elements of spirals of high-pressure heaters of NPP power units. The Paton Welding J., 05, 34-40.