Print

2012 №04 (03) 2012 №04 (05)

The Paton Welding Journal 2012 #04
The Paton Welding Journal, 2012, #4, 15-19 pages  

LASER WELDING OF SHEET STAINLESS STEEL BY MODULATED RADIATION

A.G. LUKASHENKO, T.V. MELNICHENKO and D.A. LUKASHENKO


E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
The effect of power modulation frequency and shape of laser radiation pulses on formation of weld metal structure in welding of austenitic steel of 18-10 type was investigated. It is shown that pulse laser radiation can affect solidification of weld metal and formation of fine-grained structure in it. Optimal range of modulation frequency was determined.
 
 
Keywords: laser welding, thin sheet, stainless steel, solidification, weld, modulated radiation, laser welding parameters, microstructure
 
 
Received:                10.11.11
Published:               28.04.12
 
 
References
1. Morozov, V.P. (2010) Effect of oscillation mechanism of solidification on process of primary structure refinement of weld metal and heat-affected zone. Nauka i Obrazovanie, 9, 1-18.
2. (1974) Technology of fusion electric welding of metals and alloys. Ed. by B.E. Paton. Moscow: Mashinostroenie.
3. Levin, Yu.Yu., Erofeev, V.A., Sudnik, V.A. (2008) Physical-technological conditions for producing defect-free joints in pulsed laser welding. Svarochn. Proizvodstvo, 4, 20-24.
4. Kayukov, S.V., Gusev, A.A., Samartsev, G.V. et al. Method of pulsed laser welding and unit for its realization. Pat. 2120364 RF. Int. Cl. B 23 K 26/00. Fill. 27.09.96. Publ. 20.10.98.
5. Basiev, T.T., Fedin, A.V., Chashchin, E.A. et al. Method of laser welding of metals and alloys. Pat. 2186667 RF. Int. Cl. B 23 K 26/20. Fil. 10.01.2000. Publ. 10.08.2002.
6. Myshkovets, V.N., Maksimenko, A.V., Shalupaev, S.V. et al. Method of laser welding of metals. Pat. 2269401 RF. Int. Cl. B 23 K 26/20. Fil. 27.08.04. Publ. 10.02.06.
7. Bruncko, J. (2010) Laserove mikrozvaranie kovovych materialov. Zvaranie-Svarovani, 9/10, 219-222.
8. Celen, S., Karadeniz, S., Ozden, H. (2008) Effect of laser welding parameters on fusion zone morphological, mechanical and microstructural characteristics of AISI 304 stainless steel. Materialwissenschaft und Werkstofftechnik, 39(11), 845-850.
9. Grigoriants, A.G., Shiganov, I.N., Misyurov, A.I. (2006) Technological processes of laser treatment: Manual. Ed. by A.G. Grigoriants. Moscow: MGTU im. N.E. Baumana.
10. Nazarchuk, A.T., Snisar, V.V., Demchenko, E.L. (2003) Producing welded joints equivelent in strength on quenching steels without preheating and heat treatment. The Paton Welding J., 5, 38-43.
11. Rayamyaki, P., Karkhin, V.A., Khomich, P.N. (2007) Determination of main characteristics of temperature field for evaluation of the type of weld metal solidification in fusion welding. Svarochn. Proizvodstvo, 2, 3-7.
12. Sillen, R. (2005) Introduction to thermal analysis of metals. Litio Ukrainy, 5, 6-8.
13. Volchenko, V.N., Yampolsky, V.M. (1988) Theory of welding processes: Manual. Moscow: Vysshaya Shkola.
14. (2009) YLR-100-AC. Ytterbium fiber laser: User's guide. IPG Laser GmbH.

Suggested Citation

A.G. LUKASHENKO, T.V. MELNICHENKO and D.A. LUKASHENKO (2012) LASER WELDING OF SHEET STAINLESS STEEL BY MODULATED RADIATION. The Paton Welding J., 04, 15-19.