The Paton Welding Journal, 2017, #9, 7-12 pages
Investigation of physical features and technological capabilities of continuous optical discharge
V.D. Shelyagin, A.V. Bernatsky, V.Yu. Khaskin, I.V. Shuba and A.V. Siora
E.O. Paton Electric Welding Institute, NASU
11 Kazimir Malevich Str., 03150, Kiev, Ukraine. E-mail: office@paton.kiev.ua
Abstract
In order to study physical features and technological capabilities of continuous optical discharge, a number of laboratory stands and plasmatrons were developed, which were used to determine the ranges of variation of energy, gas-dynamic, chemical and design parameters, providing stability of processing operations. It was found that at the change of power of CO
2-laser radiation in the range of 1.5–6.0 kW, power of continuous optical discharge changes linearly, while power of laser radiation, passing through the discharge, can be regulated from 8 to 40 % of CO
2-laser radiation power. Shown is the possibility of additional energy input into continuous optical discharge from direct current source. Here, power of additional input can exceed that of laser radiation. It is rational to apply continuous optical discharge, together with laser radiation which passed through it, to produce new materials, nanostructured carbide and diamond films, spheroidizing of refractory materials, surface modification, surfacing and other related technologies. 14 Ref., 1 Table, 3 Figures.
Keywords: continuous optical discharge, CO
2-laser radiation, surfacing, heat treatment, experiments, modes, metallography, structure, residual stresses
Received: 16.05.17
Published: 10.10.17
References
- Generalov, N.A., Zimakov, V.P., Kozlov, G.I. et al. (1971) Experimental investigation of continuously burning optical discharge. ZhETF, 61(1), 1434–1446.
- Kozlov, G.I. (1978) Laser plasmatron with gas flow. Pisma v ZhETF, 10(4), 586–589.
- Raizer, Yu.P. (1980) Optical discharges. UFN, 132(3), 549–581. https://doi.org/10.3367/UFNr.0132.198011e.0549
- Zimakov, V.P., Kuznetsov, V.A., Kedrov, A.Yu. et al. (2009) Gas laser for efficient maintenance of plasma of continuous optical discharge in scientific and technological applications. Kvantovaya Elektronika, 39(9), 797–801. https://doi.org/10.1070/QE2009v039n09ABEH014063
- Bolshakov, A.P., Kono, V.I., Vostrikov, V.G. et al. (2008) Examination of plasma optical discharge in multicomponent mixtures of molecular gases. Ibid., 38(2), 165–168.
- Zimakov, V.P., Kuznetsov, V.A., Kedrov, A.Yu. et al. (2009) Refraction of laser radiation in plasma of continuous optical discharge in gas flow at atmospheric pressure. Optika Atmosfery i Okeana, 22(11), 1023–1028.
- Franzen, D.L. (1973) Continuous laser-sustained plasmas. Appl. Phys., 44, 4, 1727–1732.
- Kozlov, G.I., Kuznetsov, V.A., Masyukov, V.A. (1979) Continuous optical discharge in molecular gases. ZhTF, 49(11), 2304–2310.
- Bolshakov, A.P. (2007) Synthesis of polycrystalline diamond films using laser plasmatron: Syn. of Thesis for Cand. of Phys.-Mat. Sci. Moscow: RGB.
- Raizer, Yu.P. (1996) Continuous optical discharge — maintenance and generation of dense low-temperature plasma by laser radiation. SOZh, 3, 87–94.
- Kolumbaev, E.B., Lelevkin, V.M. (2002) Numerical analysis of characteristics of optical discharge in air. Vestnik KRSU, 2(2), 76–83.
- Shelyagin, V.D., Krivtsun, I.V., Borisov, Yu.S. et al. (2005) Laser-arc and laser-plasma of welding and coating technologies. The Paton Welding J., 8, 44–49.
- Borisov, Yu.S., Khaskin, V.Yu., Vojnarovich, S.G. et al. (2012) Combined laser-microplasma cladding with powders of Ni–Cr–B–Si system alloys. Ibid., 11, 16–22.
- (1992) Physical encyclopedia. Moscow: Great Russian Encyclopedia.
Suggested Citation
V.D. Shelyagin, A.V. Bernatsky, V.Yu. Khaskin, I.V. Shuba and A.V. Siora (2017) Investigation of physical features and technological capabilities of continuous optical discharge.
The Paton Welding J., 09, 7-12.