The Paton Welding Journal, 2022, №07



2022 №07 (08)

DOI of Article 10.37434/tpwj2022.07.01

2022 №07 (02)

---

The Paton Welding Journal, 2022, #7, 3-9 pages

Calculated evaluation of stress-strain states of welded joints of aluminium AMg61 alloy under the action of electrodynamic treatment of weld metal in the process of fusion welding

L.M. Lobanov¹, M.O. Pashchyn¹, O.L. Mikhodui¹, A.A. Hryniuk¹, E.V. Illyashenko¹, P.V. Goncharov¹, V.V. Savytskyi¹, Yu.M. Sydorenko², P.R. Ustymenko²

¹National Technical University of Ukraine “Igor Sikorsky Kyiv polytechnic Institute” 37 Peremohy Prosp., 03056, Kyiv, Ukraine
²E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: svarka2000@ukr.net

Abstract
The calculation evaluation of effect of impact interaction of electrode-indenter with a welded plate of AMg61 alloy at its electrodynamic treatment (EDT) in the conditions of elevated temperatures was carried out. The solution of the problem was carried out in a flat two-dimensional Lagrangian statement based on a previously developed mathematical model using ANSYS/ LS-DYNA software. The thermal cycle of welding was set by mechanical characteristics of AMg61 alloy at temperatures of 150 and 300 °C. The results of the calculation of residual stresses during impact action of electrode-indenter at room and elevated temperatures in preliminary tensioned plates of AMg61 alloy of 3 mm thickness were presented. It is shown that the most acceptable temperature (from the studied temperature values) for the electrodynamic treatment of AMg61 alloy is 150 °C. Based on the results of the studies, it was found that the electrodynamic treatment of welded joint specimen in the form of a plate preliminary loaded with elastic tension leads to the transition of residual welding tensile stresses into compression stresses. 12 Ref., 2 Tabl. , 4 Fig.
Keywords: electrodynamic treatment, residual welding stresses, aluminium alloy, electric current pulse, impact interaction, finite-element model, electrode-indenter, elastic-plastic flow theory, fusion welding.

Received: 23.06.2022
Accepted: 15.09.2022

References

1. Madi, Y., Besson, J. (2014) Effect of residual stresses on brittle fracture. Mat. ECRS-9. UTT, Troyes, Franse.
2. Masubuchi, K. (1980) Analisis of welded structures, Pergamon Press, Oxford, United Kingdom.
3. Lobanov, L.M., Pashchyn, N.A., Kondratenko, I.P. et al. (2018) Development of Post-weld Electrodynamic Treatment Using Electric Current Pulses for Control of Stress-Strain States and Improvement of Life of Welded Structures. Materials Performance and Characterization, 7, 4. ISSN 2379-1365. https://doi.org/10.1520/MPC20170092
4. Lobanov, L.M., Pashchyn, M.O., Tymoshenko, O.M. et al. (2020) Increase in the life of welded joints of AMg6 aluminum alloy. The Paton Welding J., 4, 2-8. https://doi.org/10.37434/as2020.04.01
5. Conrad H., Sprecher A. (1989) The electroplastic effect in metals. Elsevier Science Publishers B.V., Dislocations in Solids Ed. by F.R.N. Nabarro, рр. 500-529.
6. Stepanov, G.V., Babutskii, A.I., Mameev, I.A. (2004) High-Density Pulse Current-Induced Unsteady Stress-Strain State in a Long Rod. Strength of Materials, 36, 377-381. https://doi.org/10.1023/B:STOM.0000041538.10830.34
7. Lobanov, L.M., Pashchyn, M.O., Mykhodui, O.L., Sydorenko, Yu.M. (2017) Effect of the Indenting Electrode Impact on the Stress-Strain State of an AMg6 Alloy on Electrodynamic Treatment. Strength of Materials, 49, 3, 369-380. https://doi.org/10.1007/s11223-017-9877-1
8. Sydorenko, Y.M., Pashchyn, M.O., Mykhodui, O.L. et al. (2020) Effect of Pulse Current on Residual Stresses in AMg6 Aluminum Alloy in Electrodynamic Treatment. Strength of Materials, 52, 5, 731-737. https://doi.org/10.1007/s11223-020-00226-2
9. Lobanov, L.M., Pashchin, N.A., Mikhodui, O.L., Sidorenko, Y.M. (2018) Electric Pulse Component Effect on the Stress State of AMg6 Aluminum Alloy Welded Joints Under Electrodynamic Treatment. Strength of Materials, 50, 2, 246-253. https://doi.org/10.1007/s11223-017-9862-8
10. http://www.ansys.com/.
11. Lobanov, L.M., Pashchyn, M.O., Mikhodui, O.L. et al. (2021) Modeling of stress-strain states of AMg6 alloy due to impact action of electrode-indenter in electrodynamic treatment. The Paton Welding J., 6, 2-11. https://doi.org/10.37434/tpwj2021.06.01
12. Lobanov, L.M., Pashchyn, M.O., Mikhodui, O.L. (2012) Influence of the loading conditions on the deformation resistance of AMg6 alloy during electrodynamic treatment. Strength of Materials, 44, 472-479. https://doi.org/10.1007/s11223-012-9401-6

---

Suggested Citation

L.M. Lobanov, M.O. Pashchyn, O.L. Mikhodui, A.A. Hryniuk, E.V. Illyashenko, P.V. Goncharov, V.V. Savytskyi, Yu.M. Sydorenko, P.R. Ustymenko (2022) Calculated evaluation of stress-strain states of welded joints of aluminium AMg61 alloy under the action of electrodynamic treatment of weld metal in the process of fusion welding. The Paton Welding J., 07, 3-9.

---