Print

2024 №05 (03) DOI of Article
10.37434/tpwj2024.05.04
2024 №05 (05)

The Paton Welding Journal 2024 #05
The Paton Welding Journal, 2024, #5, 28-36 pages

Optimization of the metal pool shape during electroslag melting in a stationary current-carrying mould for manufacturing of bimetallic products

V.G. Solovyov, Yu.M. Kuskov, I.Yu. Romanova

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: hhsova@gmail.com

Abstract
Mathematical modeling of multiphysics processes of Joule heating has been conducted, using a finite-element model of a stationary current-carrying mould (CCC). To manufacture bimetallic products using a stationary current-carrying mould with a circular cross-section during melting of a discrete additive at its batch feeding, the study presents the results of calculated assessment of the dependence of such metal pool shape parameters as the mirror diameter and the liquid fraction depth on the slag pool depth and CCC design parameters, namely the mould diameter, the thickness of copper bushings in the mould currentcarrying and forming sections, the water-cooled pallet thickness, and the variations in the graphite lining height, because of wear. The fi ndings will contribute to improvement of the mould design, optimization of the metal pool shape, and the technology of discrete additive melting at batch feeding in stationary CCC. 17 Ref., 7 Tabl., 6 Fig.
Keywords: stationary current-carrying mould, metal pool parameters, shape optimization, multiphysics modeling, electroslag surfacing, bimetallic product

Received: 21.02.2024
Received in revised form: 04.04.2024
Accepted: 10.06.2024

References

1. Ksendzyk, G.V., Frumin, I.I., Shirin, V.S. (1980) Electroslag remelting and surfacing apparatus. USA, Patent GB 1568746A, Fil. 22.06.77, Publ.4.06.80. https://patentimages.storage.googleapis.com/6c/fe/4a/9f5b70c9345524/ GB1568746A.pdf
2. (1986) Metallurgy of electroslag process. Ed. by B.I. Medovar at al. Kiev, Naukova Dumka [in Russian].
3. Kuskov, Yu.M., Grishchenko, T.I. (2019) Formation of metal pool in current-supplying mould at electroslag process. The Paton Welding J., 4, 33-36. https://doi.org/10.15407/tpwj2019.04.07
4. Mamyshev, V.A., Shinskii, O.I., Sokolovskaya, L.A. (2018) Intensification of internal and external heat sink at the manufacture of cast billets in molds with different properties. Report 2. Metal and Casting of Ukraine, 5-6(300-301), 38-45 [in Russian]
5. Medovar, L.B., Tsykulenko, A.K., Chernets, A.V. at all (2000) Examination of the effect of the parameters of the two-circuit system of electroslag remelting on the dimensions and shape of the metal pool. Advances is Special Electrometallurgy, 4, 3-7.
6. Protokovilov, I.V., Porokhonko, V.B. (2014) Methods to control metal solidification in ESR. Sovrem. Elektrometall., 3, 7-15. https://doi.org/10.15407/sem2015.04.01
7. Hou, Z., Dong, Y., Jiang, Z. et al. (2022) Effect of an external magnetic field on improved electroslag remelting cladding process. Int. J. Miner. Metall. Mater., 29, 1511-1521. https://doi.org/10.1007/s12613-021-2277-3
8. Soloviov, V.G., Kuskov, Yu.M. (2018) Influence of technological and electrical parameters of ESS in current-supplying mould. The Paton Welding J., 6, 20-27. https://doi.org/10.15407/tpwj2018.06.03
9. Matvienko, V.N., Mazur, V.A., Leshchinsky, L.K. (2015) Evaluation of shape and sizes of weld pool in surfacing using combined strip electrode. The Paton Welding J., 9, 28-31. https://doi.org/10.15407/tpwj2015.09.04
10. Tomilenko, S.V., Kuskov, Yu.M. (2000) Regulation and stabilization of base metal depth penetration in electroslag surfacing in current-supplying mould. Svarochn. Proizvodstro, 9, 32-35 [in Russian].
11. Sokolovskaya, L.A., Mamishev, V.A. (2009) Mathematical modeling of problems with phase transitions in metallurgy and foundry Protsessy Litya, 2, 24-29 [in Russian].
12. Liu, Fb., Zang, Xm., Jiang, Zh. et al. (2012) Comprehensive model for a slag bath in electroslag remelting process with a current-conductive mould. Int. J. Miner. Metall. Mater., 19, 303-311. https://doi.org/10.1007/s12613-012-0555-9
13. Makhnenko, O.V., Milenin, A.S., Kozlitina, S.S., Polishko, A.A., Dzhyubak, L.I. (2016) Optimizing technological process of electroslag melting of steel cylindrical ingots based on results of mathematical modeling. In: Proc. 8th Int. Conf. On Mathematical Modeling and Information Technologies in Welding and Related Processes (19-23 September 2016, Odesa), 96-101.
14. Zhiwen Hou, Yanwu Dong, Zhouhua Jiang et al. (2018) Simulation of compound rolls produced by electroslag remelting cladding method. Metals, 8(7), 504. https://doi.org/10.3390/met8070504
15. Kuskov, Yu.M., Soloviov, V.G., Lentyugov, I.P., Zhdanov, V.A. (2018) Electroslag surfacing of layers of different thickness in stationary current-supplying mould. The Paton Welding J., 10, 33-36. https://doi.org/10.15407/tpwj2018.10.06
16. Ksendzyk, G.V. (1975) Current-supplying mould providing slag pool rotation. Spets. Elektrometall., 27, 32-40 [in Russian].
17. Gukhman, A.A. (1973) Introduction to the theory of similarity. 2nd ed. Moscow, Vysshaya Shkola [in Russian].

Suggested Citation

V.G. Solovyov, Yu.M. Kuskov, I.Yu. Romanova (2024) Optimization of the metal pool shape during electroslag melting in a stationary current-carrying mould for manufacturing of bimetallic products. The Paton Welding J., 05, 28-36.