The Paton Welding Journal, 2009, №08



2009 №08 (09)

2009 №08 (02)

---

TPWJ, 2009, #8, 2-6 pages  
STATUS OF WELDING PRODUCTION AT SHIPBUILDING PLANTS OF UKRAINE


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 8, 2009 (August)
Pages                      2-6
 
 
Authors
V.F. KVASNITSKY¹, B.V. BUGAENKO¹, Zh.G. GOLOBORODKO¹, V.M. ILYUSHENKO², N.P. ROMANCHUK³, Yu.V. SOLONICHENKO³ and A.N. SHAMRAJ^3
1Admiral Makarov National Shipbuilding University, Nikolaev, Ukraine
²E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
³OJSC «Vadan Yards «Okean», Nikolaev, Ukraine
 
 
Abstract
It is shown that in spite of economic problems all over the world the shipbuilding enterprises of Ukraine have available the modern efficient technologies and equipment which allows successful production of competitive products at the world market.
 
 
Keywords: shipbuilding, assembly, welding, cutting, parts, sections, blocks, welding consumables, equipment
 
 
Received:                29.04.09
Published:               28.08.09
 
 
References
1. Egorov, G.V. (2008) About possibilities of entry of Ukraine on world shipbuilding market. Zbirnyk Nauk. Prats NUKB, 6, 3-15.
2. Dragan, S.V., Kvasnitsky, V.V., Romanchuk, N.P. et al. (2004) Welding and cutting processes in shipbuilding of Ukraine. The Paton Welding J., 8, 2-5.
3. Serbin, S.I., Kvasnitsky, V.V., Goloborodko, Zh.G. et al. (2004) Modeling of gas phase composition in plasma cutting of ship hull steels. Ibid., 8, 11-14.
4. Kvasnytskyy, V.F., Kvasnytskyy, V.V., Egorov, G.V. et al. (2005) Production technology peculiarities of ships body components from sheet product. In: Proc. of 12th Int. IMAM Congress on Maritime Transportation and Exploitation of Ocean and Coastal Resources (Lisboa, Portugal, Sept. 26-30, 2005). London: Taylor and Francis Group, Vol. 1, 935-940.
5. Kvasnytskyy, V.V., Egorov, G.V., Goloborodko, Zh.G. et al. (2008) Influence of plasma cutting methods of the quality of ship hull details and welded constructions. In: Proc. of 13th Int. IMAM Congress on Maritime Industry, Ocean Engineering and Coastal Resources (Varna, Bulgaria, Sept. 2-6, 2007). London: Taylor and Francis Group, Vol. 1, 477-482.
6. Kvasnitsky, V.F., Dragan, S.V., Solonichenko, Yu.V. et al. (1998) Efficiency of application of thin flux-cored wires in mechanized and robotic welding in shipbuilding. In: Abstr. of Papers of Int. Conf. on Welding and Related Processes into the 21st Century. Kiev: PWI, 52-53.
7. Kvasnitsky, V.F., Dragan, S.V., Gavrilenko, E.D. et al. (1998) Influence of design-technological factors in robotic technology of production of large-sized ship hull structures. Zbirnyk Nauk. Prats UDMTU, 8, 68-79.
8. Kvasnitsky, V.F., Dragan, S.V., Gavrilenko, E.D. et al. (1999) Evaluation of efficiency in application of thin fluxcored wires in welding of ship hull structures. Avtomatich. Svarka, 11, 4-7.
9. Kvasnitsky, V.F., Dragan, S.V., Ivashchenko, G.M. et al. (1999) Economical aspects in application of national and foreign welding consumables for production of ship hull structures. Zbirnyk Nauk. Prats UDMTU, 6, 19-26.
10. Kvasnitsky, V.F., Solonichenko, Yu.V., Dragan, S.V. et al. (2002) Analysis of efficiency of shielded-gas welding technological versions in production of ship hull structures. In: Proc. of 1st Int. Sci.-Pract. Conf. on Protection of Environment, Health, Safety in Welding Production (Odessa, Sept. 11-13, 2002). Odessa: Astroprint, 568-575.
11. Kvasnitsky, V.F., Dragan, S.V., Gavrilenko, E.D. et al. (1998) Technological capabilities in efficiency increase of ship hull production. Zbirnyk Nauk. Prats UDMTU, 7, 69-80.
12. Pokhodnja, I.K., Schlepakov, W.N., Iljuschenko, W.M. et al. (1995) Hochleistungsschweissen von Vertikalnaehten mit Zwangsformungj In: Sondertagung Schweissen in Schiffund Metallbau mit Kolloqium (Rostock, 4-5 Mai, 1995). Duesseldorf: DVS, 23.
13. Voropaj, N.M., Ilyushenko, V.M. (2003) Hybrid processes of arc and plasma welding. Svarshchik, 2, 22-27.
14. Voropaj, N.M., Ilyushenko, V.M., Mishenkov, V.A. (2005) Technological capabilities of the processes of gas-shielded pulsed twin-arc welding (Review). The Paton Welding J., 7, 38-42.
15. Shelyagin, V.D., Krivtsun, I.V., Borisov, Yu.S. et al. (2005) Laser-arc and laser-plasma welding and coating technologies. The Paton Welding J., 8, 44-49.
16. Gretsky, Yu.Ya., Maksimov, S.Yu. (1997) Technological processes of underwater welding and cutting of steels with flux-cored wires. In: Proc. of ASM Int. European Conf. on Welding and Joining Science and Technology (Madrid, Spain, March, 10-12, 1997), 165-179.

---