The Paton Welding Journal, 2019, №12



2019 №12 (01)

DOI of Article 10.15407/tpwj2019.12.02

2019 №12 (03)

---

The Paton Welding Journal, 2019, #12, 11-23 pages
 
Journal The Paton Welding Journal
Publisher International Association «Welding»
ISSN 0957-798X (print)
Issue #12, 2019 (December)
Pages 11-23

Processes of nonconsumable electrode welding with welding current modulation (Review). Part II. Effects of arc impact on the metal being welded

Boyi Wu¹ and I.V. Krivtsun²

¹Guangdong Institute of Welding (China-Ukraine E.O.Paton Institute of Welding) 363 Chiansin Str., 510650, Guangzhou, Tianhe. E-mail: wuby@gwi.gd.cn
²E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

A review of studies, devoted to the processes of nonconsumable electrode inert-gas welding with welding current modulation was performed. The second part of the review is devoted to analysis of the works, dealing with the features of metal penetration (aluminium alloys, stainless steels, high-temperature nickel-chromium alloys) and weld formation in TIG welding with modulated current. 12 Ref., 16 Tables, 19 Figures.
Keywords: arc with refractory cathode, TIG welding, metal being welded, penetration, weld, welding current modulation, pulse, frequency, fill factor, amplitude

 
Received: 04.11.19
Published: 30.01.19
 
 

References

1. Boyi, U., Krivtsun, I.V. (2019) Processes of nonconsumable electrode welding with welding current modulation (Review). Pt 1: Peculiarities of burning of nonstationary arcs with refractory cathode. The Paton Welding J., 11, 23-32. https://doi.org/10.15407/tpwj2019.11.05
2. Roden, W.A. (1972) High-frequency, pulsed-current GTA welding. In: Proc. of National Aerospace Engineering and Manufacturing Meeting (2-5 Oct. 1972, San Diego, California, USA). Paper 720874, 1-8.
3. Leitner, R.E., McElhinney, G.H., Pruitt, E.L. (1973) An investigation of pulsed GTA welding variables. Welding J., Res. Suppl., 9, 405-410.
4. Omar, A.A., Lundin, C.D. (1979) Pulsed plasma - pulsed GTA arcs: A study of the process variables. Ibid., 4, 97-105.
5. Saedi, H.R., Unkel, W. (1988) Arc and weld pool behavior for pulsed current GTAW. Ibid., 11, 247-255.
6. Dzelnitzki, D. (2000) Muendersbach TIG - direct-current welding with high-frequency pulses, an interesting process variant. EWM Hightec Welding GmbH. WM008801. DOC: 08.00.
7. Onuki, J., Anazawa, Y., Nihei, M. et al. (2002) Development of a new high-frequency, high-peak current power source for high constricted arc formation. Japan. J. Appl. Phys., 41, 5821-5826. https://doi.org/10.1143/JJAP.41.5821
8. Karunakaran, N., Balasubramanian,V. (2011) Effect of pulsed current on temperature distribution, weld bead profiles and characteristics of gas tungsten arc welded aluminum alloy joints. Transact. Nonferrous Met. Soc. China, 21, 278-286. https://doi.org/10.1016/S1003-6326(11)60710-3
9. Qi, B., Yang, M., Cong, B. et al. (2013) The effect of arc behavior on weld geometry by high-frequency pulse GTAW process with 0Cr18Ni9Ti stainless steel. Int. J. Adv. Manuf. Technol., 66, 1545-1553. https://doi.org/10.1007/s00170-012-4438-z
10. Yang, Z., Qi, B., Cong, B. et al. (2013) Effect of pulse frequency on weld appearance behavior by TC4 titanium alloys. Transact. China Welding Institute, 34(12), 37-40.
11. Cunha, T.V.D., Louise-Voigt, A., Bohorquez, C.E.N. (2016) Analysis of mean and RMS current welding in the pulsed TIG welding process. J. of Materials Processing Technology, 231, 449-455. https://doi.org/10.1016/j.jmatprotec.2016.01.005
12. Silva, D.C.C., Scotti, A. (2016) Using either mean or RMS values to represent current in modeling of arc welding bead geometries. Ibid., 240, 382-387. https://doi.org/10.1016/j.jmatprotec.2016.10.008

---

Suggested Citation

Boyi Wu¹ and I.V. Krivtsun (2019) Processes of nonconsumable electrode welding with welding current modulation (Review). Part II. Effects of arc impact on the metal being welded. The Paton Welding J., 12, 11-23.

---