“The Paton Welding Journal” #08_2023 will be freely distributed from 11 to 15 September during the exhibition SCHWEISSEN & SCHNEIDEN 2023, Messe Essen, Norbertstrasse 2, Essen, Germany at the stand of the Paton Welding Institute: Hall 8 Stand 8B29.1.
You can also order this issue of the Journal in electronic form for free.
Send applications to E-mail: email@example.com
Contents of the issue
STUDYING THE FEATURES OF MASS TRANSFER IN THE PROCESS OF FRICTION STIR WELDING USING PHYSICAL MODELLING
E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
Abstract Model of the process of friction stir welding was used to study the influence of structural dimensions of working surfaces of tool shoulder and tip on the features of material displacement in the thermodynamic impact zone. It is shown that a permanent joint forms due to displacement of a certain amount of ductile material by the tool tip and its mixing across the entire thickness of edges. Shape of working surface of tool shoulder end face predetermines the displacement trajectory, movement speed, uniformity of mixing and degree of compaction of the materials being joined at solidification.
Keywords: friction stir welding, process modelling, mass transfer, tool tip design, shoulder working surface
References 1. Dawes, C.J., Thomas, W.M. (1996) Friction stir process welds aluminum alloys. Welding J., 3, 41-45.
2. Arbegast, W.J. (2006) Friction stir welding after a decade of development. Ibid., 3, 28-35.
3. Kallee, S., Nicholas, D. (1998) Causing a stir in the future. Welding and Joining, 2, 18-21.
4. Johnsen, M.R. (1999) Friction stir welding takes off at Boeing. Welding J., 2, 35-39.
5. Okamura, H., Aota, K., Ezumi, M. (2000) Friction stir welding of aluminum alloy and application to structure. J. Japan Institute of Light Metals, 4, 166-172.
6. Pietras, A., Zadroga, L., Lomozik, M. (2004) Characteristics of welds formed by pressure welding incorporating stirring of the weld material (FSW). Welding Int., 1, 5-10.
7. Colligan, K. (1999) Material flow behavior during friction stir welding of aluminum. Welding J., 7, 229-237.
8. London, B., Mahoney, M., Bingel, W. et al. (2001) Experimental methods for determining material flow in friction stir welds. In: Proc. of 3rd Int. Symp. on Friction Stir Welding (Kobe, Japan, Sept. 27-28, 2001), 1-7.
9. Dickerson, T., Shercliff, H., Schmidt, H. (2003) A weld marker technique for flow visualization in friction stir welding. In: Proc. of 4th Int. Symp. on Friction Stir Welding (Utah, USA, May, 2003), 1-12.
10. Colegrove, P.A., Shercliff, H.R. (2004) Development of trivex friction stir welding tool. Pt 1: Two-dimensional flow modeling and experimental validation. Sci. and Techn. щf Welding and Joining, 4, 345-351.
11. Shibayanagi, T. (2007) Microstructural aspects in friction stir welding. J. Japan Institute of Light Metals, 9, 416-423.
12. Tanabe, H., Watanabe, T., Yoshida, R. et al. (2007) Solid state welding between CPTi and AZ31B magnesium alloy using a rotating probe with thread. Quarterly J. JWS, 2, 386-393.