Print

2013 №12 (04) 2013 №12 (06)

The Paton Welding Journal 2013 #12
The Paton Welding Journal, 2013, #12, 29-32 pages

INFLUENCE OF RESIDUAL STRESSES IN WELDED JOINTS OF TWO-LAYER STEELS ON SERVICE RELIABILITY OF METAL STRUCTURES

V.V. CHIGARYOV1 and I.V. KOVALENKO2


1Priazovsky State Technical University. 7, Universitetsky Lane, 87500, Mariupol, Ukraine. E-mail: chigarew@pstu.edu
2Company «Iliich Mariupol Metallurgical Works» 20, Levchenko Str., 87504, Mariupol, Ukraine. E-mail: oksikov19@mail.ru
 
 
Abstract
The main purpose of the present investigations is determination of influence of residual stresses in the near-weld zone of cladding layer of two-layer steel VSt3+ 10Kh13 on its operation properties. The task put before the authors was to compare theoretical and experimental values of residual stresses in welded specimens of two-layer steels VSt3+ 08Kh13, VSt3+ 10Kh13, VSt3+ 10Kh17N13M2T and to determine the material which is the most suitable for the further service. To define the level of residual stresses of cladding layer the low-cycle uniaxial loading of specimens and mathematical calculations were used. The results of measurements of residual stresses carried out using strain gauges and comparison of their values with theoretical ones allow making the confirmation that preset values of residual stresses in the near-weld zone of the joint VSt3 + 08Kh13 equal to 100 MPa evidences of the presence of reserve of operation reliability of the joints. On this reason the bimetal steels, described in the given work, are suitable for manufacture of large metallurgical units. 6 Ref., 1 Table, 5 Figures.
 
 
Keywords: arc welding of bimetals, residual stresses, cladding layer, near-weld zone, elasticity modulus, strain gauge, layer deformation, service properties
 
 
Received:                25.01.13
Published:               28.12.13
 
 
References
1. Medovar, B.I. (1958) Welding of chrome-nickel austenitic steels. Moscow: Mashgiz.
2. Glikman, L.A., Babaev, A.N., Kostrov, E.N. (1962) Fatigue strength and intensity of welded samples with deposited layer 10Kh13. In: Properties of materials applied in turbine construction and methods of their tests. Moscow-Leningrad: Mashgiz.
3. Nedoseka, A.Ya. (1988) Principles of design of welded structures. Kiev: Vyshcha Shkola.
4. Kovalenko, I.V. (2013) Improvement of technology of arc welding of two-layer steels in manufacturing of industrial metal structures: Syn. of Thesis for Cand. of Techn. Sci. Degree. Mariupol.
5. Nikolaev, G.A., Kurkin, S.A., Vinokurov, V.A. (1982) Welded structures. Strength of welded joints and deformations of structures. Moscow: Vysshaya Shkola.
6. Stafakov, Yu.P., Pobal, I.L., Knyazeva, A.G. (2002) Growth of cracks near interface of dissimilar materials under conditions of compression. Fizich. Mezomekhanika, 1, 81-88.
4?ti???!??! particles from individual wires and the effects of nozzle geometry in twin wire arc spraying. Surface and Coatings Technology, 200, Issue 7, 2133-2130.
 
11. Boronenkov, V.N., Korobov, Yu.S. (2012) Fundumantals of arc spraying. Physical-chemical principles. Ekaterinburg: UralGU.
12. Korobov, Yu.S., Boronenkov, V.N. (2003) Kinetics of interaction of spray metal with oxygen in electric arc metal spraying. Svarochn. Proizvodstvo, 7, 30-36.
13. Planche, M.P., Liao, H., Coddet, C. (2004) Relationships between in-flight particle characteristics and coating microstructure with a twin wire arc spray process and different working conditions. Surface and Coatings Technology, 182, Issues 2/3, 215-226.
14. Hussary, N.A., Heberlein, J.V.R. (2001) Atomization and particle-jet interactions in the wire-arc spraying process. J. Thermal Spray Technology, 10, Issue 4, 604-610.
15. Zhu, Y.L., Liao, H.L., Coddet, C. et al. (2003) Characterization via image analysis of cross-over trajectories and inhomogeneity in twin wire arc spraying. Surface and Coatings Technology, 162, Issues 2/3, 301-308.
16. Novik, F.S., Arsov, Ya.B. (1980) Optimization of processes of technology of metals by methods of experiment planning. Moscow: Mashinostroenie; Sofia: Tekhnika.
17. Kats, N.V., Antoshin, E.V., Vadivasov, D.G. (1966) Metal spraying. Moscow: Mashinostroenie.
18. Troitsky, A.F. (1960) Principles of metal spraying. Tashkent: Gosizdat UzSSR.
19. (1979) Development of velocimeter of luminous objects USSO-1: Report on R&D activity. Minsk: IF AN BSSR.
20. Kuznetsov, V.D., Pashchenko, V.D. (1999) Physical-chemical bases of coating formation: Manual. Kiev: NMTs VO.
21. http://www.masters.donntu.edu.ua/2006/fizmet/ yeresko/dis/dis(ru).htm. Analysis of technology of copper elimination by evaporation from molten metal under electric arc action
22. Zigalo, I.N., Baptizmansky, V.I., Vyatkin, Yu.F. et al. (1991) Copper in steel and problems of its elimination. Stal, 7, 18-22.

Suggested Citation

V.V. CHIGARYOV and I.V. KOVALENKO (2013) INFLUENCE OF RESIDUAL STRESSES IN WELDED JOINTS OF TWO-LAYER STEELS ON SERVICE RELIABILITY OF METAL STRUCTURES. The Paton Welding J., 12, 29-32.