The Paton Welding Journal, 2022, №01



2022 №01 (06)

DOI of Article 10.37434/tpwj2022.01.07

2022 №01 (08)

---

The Paton Welding Journal, 2022, #1, 33-40 pages

Mathematical modeling of residual stresses in composite welded joints of WWER-1000 reactor vessel cover with CSS nozzles

A.A. Makarenko, O.V. Makhnenko

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: makhnenko@paton.kiev.ua

Abstract
Composite welded joints (CWJ) of the WWER-1000 reactor vessel cover with the nozzles of the control safety system (CSS) is the object of calculations of strength in the feasibility study of life extension of NPP power units. Kinetics of formation of residual stresses in welding CWJ of the WWER-1000 reactor vessel cover with the CSS nozzles and also their redistribution as a result of postweld heat treatment were calculated by mathematical modeling using finite element method. Effect of preheating on microstructural phase transformations in the HAZ of base material of the cover and nozzle was studied. The main features of residual stress distribution in CWJ after welding and after heat treatment were determined.
Keywords: composite welded joint, reactor vessel cover, WWER-1000, HAZ, microstructural phase transformations, residual stresses, heat treatment, mathematical modeling

Received: 30.10.2021
Accepted: 07.02.2022

References

1. Makhnenko, O.V., Saprykina, G.Yu. (2002) Role of mathematical modeling in solving problems of welding dissimilar steels (Review). The Paton Welding J., 3, 14-25.
2. Makhnenko, O.V., Kozlitina, S.S., Dzyubak, L.L., Kravets, V.P. (2010) Risk of formation of carbides and α-phase in welding of high-alloy chrome-nickel steels. Ibid., 12, 5-8.
3. Wenchun Jiang, Wanchuck Woo, Yun Luo, J.H. Li. (2017) Residual stress distribution in a dissimilar weld joint by experimental and simulation study. J. of Pressure Vessel Technology, 2(139), 011422-1-011422-10. https://doi.org/10.1115/1.4033532
4. Dean, Deng, Kazuo, Ogawa, Shoichi, Kiyoshima et al. (2009) Simplified methodology to compute the residual stresses in a dissimilar metal welded pipe with considering cladding, buttering and post weld heat treatment. Computat. Mater. Sci., 47, 398-408. https://doi.org/10.1016/j.commatsci.2009.09.001
5. Kasatkin, O.G., Tsaryuk, A.K., Skulsky, V.Yu. et al. (2007) Method for improving local damage resistance of welded joints in NPP pipelines. The Paton Welding J., 3, 27-30.
6. 1160.02.02.000 PS: Certificate of vessel. Upper block YC00В01. 2.1 [in Russian].
7. 1160.02.18.000TB1: Cover. Table of quality control [in Russian].
8. 1160.02.18.000ТB2: Cover. Table of quality control [in Russian].
9. Makhnenko, V.I. (1976) Calculated methods of investigation of welding stresses and strains. Kiev: Naukova Dumka [in Russian].
10. Yurjev, S.F. (1950) Specific volumes of phase in martensitic transformation of austenite. Moscow, Metallurgizdat [in Russian].
11. (1989) PNAE G-7-009-89: Equipment and pipings of nuclear power plants. Welding and surfacing. Fundamentals. Moscow, Energoatomizdat [in Russian].
12. SOU NAEK 159: Assurance of technical safety. Welding and surfacing of equipment and pipings of nuclear power plants with WWER reactors. Technical requirements.
13. Rabotnov, Yu.N. (1966) Creep of structural elements. Moscow, GIFML [in Russian.
14. Margolin, B. Z., Gulenko, A. G., Kursevich, I. P., Buchatskii, A. A. (2006) Modeling for fracture in materials under long-term static creep loading and neutron irradiation. Pt 2. Prediction of creep rupture strength for austenitic materials. Strength of Materials, 38(5), 449-457. https://doi.org/10.1007/s11223-006-0064-z

---

Suggested Citation

A.A. Makarenko, O.V. Makhnenko (2022) Mathematical modeling of residual stresses in composite welded joints of WWER-1000 reactor vessel cover with CSS nozzles. The Paton Welding J., 01, 33-40.

---