Print
2001 №02 (02) 2001 №02 (04)

The Paton Welding Journal 2001 #02
The Paton Welding Journal, 2001, #2, 12-15 pages

Assessment of fatigue life of tubular connections subjected to ultrasonic peening treatment

E.F. Garf1, A.E. Litvinenko1, A.Kh. Smirnov2

1E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.
2I.M. Gubkin State Academy of Oil and Gas, Moscow, Russia

Abstract
Feasibility of extension of life of operating welded structures, made from tubes, by using the peening treatment of the zone of welding is considered. It is shown that the use of a linear hypothesis of accumulation of the fatigue damage is rightful for the estimation of the full life. Moreover, the peening treatment of welded joints increases the material fatigue strength
Keywords: ultrasonic peening treatment, welded joint, tubular connections, fatigue resistance, fatigue life, life, residual life, fatigue testing

References

1. Marshall, P.W. (1984) Connections for welded tubular structures. In: Proc, of 2nd Int. Conf, on Welding of Tubular Structures, Boston, July 16-17. Boston: Pergamon Press.
2. Garf, E.F., Dyskin, E.M., Kazachok, V.M. (1997) Offshore platforms. In: Welded structures for construction. Kyiv: PWI.
3. Garf, E.F., Litvinenko, A.E. (1983) Influence of the angle of the brace meeting the girth on the strength of tubular welded connections loaded by bending moments. Avtomaticheskaya Svarka, 6, 5-7.
4. Paton, B.E., Lobanov, L.M., Statnikov, E.Sh. et al. A method of ultrasonic peening treatment and operational technological system for its implementation. Pat. 12741 Ukraine, Int. Cl. 21 D 10/04. Publ. 28.02.97.
5. Mikheev, P.P. (1990) Improvement of fatigue resistance of welded joints in structures by ultrasonic peening treatment In: Transact, of PWI on Problems of Welding and Special Electrometallurgy. Kyiv: Naukova Dumka.
6. Mikheev, P.P., Nedoseka, A.Ya., Parkhomenko, I.V. et al. (1984) Effectiveness of application of ultrasonic peening treatment to improve the fatigue resistance of welded joints. Avtomaticheskaya Svarka, 3,4-7.
7. Statnikov, E.Sh., Shevtsov, E.M., Kulikov, V.F. (1977) Ultrasonic peening tool for strengthening the welds and reducing residual stresses. In: New physical methods of technological processes intensification. Moscow: Metallurgia.
8. Mikheev, P.P., Garf, E.F., Kuzmenko, A.Z. et al. (1992) Improvement of fatigue resistance of tubular welded connections by ultrasonic peening treatment. Avtomaticheskaya Svarka, 11/12, 3-6.
9. Mikheev, P.P., Garf, E.F., Kuzmenko, A.Z. et al. (1966) Improvement of fatigue resistance of tubular welded connections by ultrasonic peening. Int. J. Off-shore and Polar Eng., 4, 304-308.
10. Garf, E.F. (1995) Fatigue analysis of tubular welded connections after ultrasonic peening treatment. Avtomaticheskaya Svarka, 9, 24-27.

Suggested Citation

E.F. Garf, A.E. Litvinenko, A.Kh. Smirnov (2001) Assessment of fatigue life of tubular connections subjected to ultrasonic peening treatment. The Paton Welding J., 02, 12-15.