Print

2022 №04 (02) DOI of Article
10.37434/tpwj2022.04.03
2022 №04 (04)

The Paton Welding Journal 2022 #04
The Paton Welding Journal, 2022, #4, 14-18 pages

Centrifugal plasma surfacing of drill pump bushings

O.I. Som


Plasma-Master Co. Ltd. 3 Akademik Krzhizhanovskii Str., 03142, Kyiv, Ukraine. E-mail: info@plasma-master.com

Abstract
Features of centrifugal plasma surfacing using powders of three different alloying systems based on iron and nickel were studied. It is found that at centrifugal plasma surfacing the iron-based test powder has the best welding-technological properties. It allows producing deposited metal of 200Kh15D2MS2R type. The layer deposited with this powder, has a microstructure of uniform height and ensures increase of the sleeve wear resistance 5–6 times, compared to batch-produced ones, which are made from steel 70 and 􀁔uenched by HFC. A design of the bushing component is proposed with replaceable surfaced sleeve, which is more adaptable to fabrication and allows repairing it by simple replacement of the worn sleeve.
Keywords: centrifugal plasma surfacing, surfacing alloys, deposited metal, metal structure, wear resistance, carbides, hardness, layer thickness

Received: 19.04.2022
Accepted: 30.06.2022

References

1. Nikolich, A.S. (1973) Drill piston pumps. Moscow, Nedra [in Russian].
2. Mkrtychyan, Ya.S. (1984) Improvement of efficiency of drill pump units. Moscow, Nedra [in Russian].
3. Samoilovich, Yu.A. (2017) Increase of operating life of drill pump barrel by thermocyclic treatment of barrel material. Stal, 4, 44–49 [in Russian].
4. Site LLC Bursnab. http://www.bursnab.com, Moscow [in Russian].
5. Site LLC RosPrombur. http://www.rosprombur.ru, Moscow [in Russian].
6. Gladky, P.V., Som, A.I., Pereplyotchikov, E.F. (1984) Centrifugal surfacing. In: New processes of surfacing, properties of deposited metal and transition zone. Kyiv, PWI, 31-34 [in Russian].
7. Yushchenko, K.A., Gladky, P.V., Som, A.I. et al. (1991) Method of centrifugal surfacing. USSR author’s cert. 1636151. Publ. 23.03.1991 [in Russian].
8. (1979) Surfacing materials of countries-members of CMEA. Catalog. MTsNTI [in Russian].
9. Som, A.I., Zelnichenko, A.T. (2010) Numerical calculation of thermal processes in centrifugal plasma powder cladding. The Paton Welding J., 6, 13􀯅18.
10. Yuzvenko, Yu.A., Gavrish, V.A., Marienko, V.O. (1979) Laboratory units for evaluation of wear resistance of deposited metal. In: Theoretical and technological principles of surfacing. Properties and tests of deposited metal. Kyiv, PWI, 23–27 [in Russian].

Suggested Citation

O.I. Som (2022) Centrifugal plasma surfacing of drill pump bushings. The Paton Welding J., 04, 14-18.