Print

2012 №01 (07) 2012 №01 (09)

The Paton Welding Journal 2012 #01
The Paton Welding Journal, 2012, #1, 29-33 pages  

TENDENCIES IN DEVELOPMENT OF CONTROL OF METAL TRANSFER PROCESSES IN SHIELDING GASES (Review)

A.M. ZHERNOSEKOV


E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Trends in development of modern arc power sources and gas-shielded consumable electrode welding technologies are analyzed. Different types of electrode metal transfer and the possibility of controlling them by varying the welding current parameters are considered. A high potential of the controllable gas-shielded pulsed-arc welding process is substantiated.
 
 
Keywords: metal transfer control, consumable electrode arc welding, shielding gases, short-circuiting, rotating arc
 
 
Received:                12.10.11
Published:               28.01.12
 
 
References
1. Middeldorf, K., von Hofe, D. (2008) Trends in joining technology. The Paton Welding J., 11, 33-39.
2. Sato, K. (2008) Current power supplies for arc welding with low spattering. Welding Technology, 2, 60-65.
3. (1978) Welding in machine building: Refer. book. Ed. by N.A. Olshansky. Vol. 1. Moscow: Mashinostroenie.
4. Potapievsky, A.G. (1974) Consumable electrode shieldedgas welding. Moscow: Mashinostroenie.
5. Lenivkin, V.A., Dyurgerov, N.G., Sagirov, Kh.N. (1989) Technological properties of shielded-gas arc welding. Moscow: Mashinostroenie.
6. Shejko, P.P., Zhernosekov, A.M., Shimanovsky, Yu.O. (2004) Consumable-electrode pulsed-arc welding with automatic stabilization of mode parameters. The Paton Welding J., 1, 7-10.
7. (2010) Criteri di scelta del gas di protezione per la saldatura a filo continuo con fili pieni. Riv. Italiana della Saldatura, 5, 629-637.
8. Kusch, M. (2006) Metall-Inertgasschweissen von Aluminium mit gepulster Schutzgaszufuhr. Schweissen und Schneiden, 58(1), 19-22.
9. (2005) Automated pipeline welding: Welding abroad. The Paton Welding J., 1, 46-49.
10. Lebedev, V.A. (2010) Tendencies in development of mechanized welding with controlled transfer of electrode metal (Review). Ibid., 10, 37-44.
11. Voropaj, N.M. (1996) Parameters and technological possibilities of arc welding with pulsed feed of electrode and filler wire. Avtomatich. Svarka, 10, 3-9.
12. Lankin, Yu.N. (2007) Automatic control of the MAG welding process with periodic short circuiting of arc gap (Review). The Paton Welding J., 1, 2-8.
13. Karasyov, M.V., Vyshemirsky, E.M., Bespalov, V.I. et al. (2004) Characteristics of modern units for mechanized GMA welding. Ibid., 12, 36-39.
14. Zyabkin, O.V., Kuskov, V.N., Potapov, D.A. et al. (2009) Influence of parameters of pulsed welding by STT method on heat generation and joint structure. Zagot. Pr-va v Mashinostroenii, 4, 13-15.
15. Bondarenko, V.L. (2004) Arc welding with pulsed feed of electrode wire Д CMT process proposed by Fronius. Avtomatich. Svarka, 12, 55-58.
16. Himmelbauer, K. (2010) CMT process Д the revolution in welding technologies. Svarshchik v Rossii, 3, 28-32.
17. Hirota, Yu. (2010) New technologies of arc welding. J. JWS, 79(6), 15-39.
18. Technologies and guidelines EWM highspeed. www.ewm.ru/technologies/highspeed
19. Zhernosekov, A.M., Andreev, V.V. (2007) Pulsed metal arc welding. The Paton Welding J., 10, 40-43.
20. Pavshuk, V.M., Shejko, P.P. Power supply for pulsed-arc welding. USSR author's cert. 4696750/27. Int. Cl. B 23 K 9/09. Publ. 07.10.91.
21. Pavshuk, V.M. (1993) Method and power supply for consumable electrode pulsed-arc welding with step-like pulse shape: Syn. of Thesis for Cand. of Techn. Sci. Degree. Kiev.
22. Zhernosekov, A.M. (2006) Systems of automatic stabilization of consumable electrode pulsed-arc welding process: Syn. of Thesis for Cand. of Techn. Sci. Degree. Kiev.
23. Kamiyama, T. (2010) Development of arc welding machines. Welding Technology, 58(2), 46-57.
24. Shejko, P.P. (1996) Single-pass pulsed-arc welding of AMg6 alloy products by modulated current. Avtomatich. Svarka, 7, 31-32.
25. Jaeschke, B., Vollrath, K. (2009) Speedpulse - eine produktivitaets-und effiziensteigernde Weiterentwicklung des MSG-Impulsschweissens. Schweissen und Schneiden, 61(9), 548-553.
26. (2010) MT ADVANCE: specialist in welding of thin metal. Avtomatich. Svarka, 10, 67-68.
27. Tong, H., Ueyama, T. (2004) Solutions to problems of tiny spatter and arc interruption in AC pulsed MIG arc welding. Qart. J. JWS, 22(2), 240-247.
28. Maxl, G., Posch, G. (2008) MAG - Wechselstromschweissen von hochfesten Feinkornbaustaehlen. Schweiss & Prueftechnik, 3, 35-38.
29. Geke, S., Hegergard, J., Lundin, M. et al. (2002) Tandem MIG/MAG welding. Svarochn. Proizvodstvo, 4, 30-35.
30. Staufer, H., Hackl, H. (2001) Laser-MIG process for automotive industry. The Paton Welding J., 12, 26-29.
31. Staufer, H., Ruehrnoebl, M. (2006) Fuer grosse Blechdicken und hohe Schweissgeschwindigkeiten: Laserhybrid- + Tandemschweissen. Praktiker, 10, 300-302.
32. Kah, P., Salminen, A., Martikainen, J. (2010) Laser-arc hybrid welding processes (Review). The Paton Welding J., 6, 32-40.

Suggested Citation

A.M. ZHERNOSEKOV (2012) TENDENCIES IN DEVELOPMENT OF CONTROL OF METAL TRANSFER PROCESSES IN SHIELDING GASES (Review). The Paton Welding J., 01, 29-33.