Print

2012 №11 (02) 2012 №11 (04)

The Paton Welding Journal 2012 #11
The Paton Welding Journal, 2012, #11, 16-22 pages  

COMBINED LASER-MICROPLASMA CLADDING WITH POWDERS OF Ni-Cr-B-Si SYSTEM ALLOYS

Yu.S. Borisov, V.Yu. Khaskin, S.G. Vojnarovich, A.N. Kislitsa, A.Yu. Tunik, L.I. Adeeva, E.K. Kuzmich-yanchuk, A.V. Bernatsky and A.V. Siora


E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Structural features of deposited layers produced by the combined laser-microplasma method using powders of the Ni-Cr-B-Si system alloys were investigated. Technological advantages and drawbacks of a combination of laser cladding and microplasma spraying were determined. It was shown that the developed combined laser-microplasma method allows improving the quality of the deposited layers by preserving the key advantages characteristic of the laser powder cladding process.
 
Keywords: combined laser-microplasma cladding, self-fluxing nickel alloy, structure, phase composition, hardness, wear resistance
 
 
Received:                ??.??.??
Published:               28.11.12
 
 
References
 
1. Borisov, Yu.S., Kharlamov, Yu.A., Sidorenko, S.L. et al. (1987) Thermal spray coatings from powder materials: Refer. Book. Kiev: Naukova Dumka.
2. Grigoriants, A.G., Safonov, A.N., Shibaev, V.V. (1982) Production of wear-resistant chrome-nickel and chrome-boron-nickel coatings by using laser radiation. Izvestiya Vuzov. Mashinostroenie, 3, 87-92.
3. Safonov, A.N., Grigoriants, A.G., Shibaev, V.V. et al. (1984) Investigation of crack formation in laser cladding of chrome-boron-nickel powdered alloys. Ibid., 12, 64-68.
4. Dilthey, U., Wieschemann, A. (2000) Prospects by combining and coupling laser beam and arc welding processes. Rivista Italiana della Saldatura, 52(6), 749-759.
5. Coddet, C., Montaron, G., Marchione, T. et al. (1998) Surface preparation and thermal spray in a single step: the PROTAL process. In: Proc. of 15th ITSC (Nice, France), Vol. 1, 1321-1325.
6. Krivtsun, I.V. (2002) Combined laser-arc processes of materials treatment and devices for their realization: Syn. of Thesis for Dr. of Techn. Sci. Degree. Kiev: PWI.
7. Shelyagin, V.D., Krivtsun, I.V., Borisov, Yu.S. et al. (2006) Laser-arc and laser-plasma welding and coating technologies. Svarka v Sibiri, 1, 32-36.
8. Borisov, Yu.S., Vojnarovich, S.G., Bobrik, V.G. et al. (2000) Microplasma spraying of bioceramic coatings. The Paton Welding J., 12, 63-67.
9. Velichko, O.A., Avramchenko, P.F., Molchan, I.V. et al. (1990) Laser powder cladding of cylindrical parts. Avtomatich. Svarka, 1, 59-65.
10. Gershenzon, S.M., Borisov, Yu.S., Razikov, M.I. et al. (1978) Interaction of self-fluxing nickel alloys with oxygen. Svarochn. Proizvodstvo, 1, 9-11.

Suggested Citation

Yu.S. Borisov, V.Yu. Khaskin, S.G. Vojnarovich, A.N. Kislitsa, A.Yu. Tunik, L.I. Adeeva, E.K. Kuzmich-yanchuk, A.V. Bernatsky and A.V. Siora (2012) COMBINED LASER-MICROPLASMA CLADDING WITH POWDERS OF Ni-Cr-B-Si SYSTEM ALLOYS. The Paton Welding J., 11, 16-22.