Print

2022 №03 (06) DOI of Article
10.37434/tpwj2022.03.07
2022 №03 (08)

The Paton Welding Journal 2022 #03
п»їThe Paton Welding Journal, 2022, #3, 49-53 pages

Investigations of the quality of wrought semi-finished products from VT9 titanium alloy produced by electron beam melting

S.V. Akhonin1, A.Yu. Severin1, V.O. Berezos1, O.M. Pikulin1, V.A. Kryzhanovskyi2, O.G. Yerokhin3


1E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: akhonin.sv@gmail.com
2?NVO Khvylia? Company. 44/1 Naberezhnaja Peremohi, 49094, Dnipro, Ukraine. E-mail: npovolna@ukr.net
3SC ?SPC ?Titan? of the E.O. Paton Electric Welding Institute of the NASU.?. 26, Raketna Str., 03028, Kyiv, Ukraine. ?-mail: titan.paton@gmail.com

Abstract
Complex works were performed to study the quality of wrought semi-finished products, manufactured from an ingot of VT9 titanium alloy. electron beam remelting technology was used to produce ingots of 600 mm diameter and 1.5 m length, from which semi-finished products were manufactured in the form of hot-pressed rods of 315 mm diameter. Results of investigations of structural and mechanical properties of semi-finished products in the form of hot-pressed rods are given. It is shown that the metal of the produced ingots and wrought semi-finished products after the respective heat treatment meets the requirements of the standards.
Keywords: electron beam melting; high-strength titanium alloy; ingot; chemical composition; structure; deformation; mechanical properties

Received: 06.10.2021
Accepted: 16.05.2022

References

1. Pavlova, T.V., Kashapov, O.S., Nochovnaya, N.A. (2012) Titanium Alloys For Gas Turbine Engines. All Materials. Encyclopedic Reference Book. Moscow, Mgty Im. N.E. Bauman [In Russian].
2. Khoreev, A.I., Khoreev, M.A. (2005) Titanium Alloys, Their Application And Prospects Of Development. Materialovedenie, 7, 25-34 [In Russian].
3. Aleksandrov, V.K., Anoshkin, N.F., Bochvar, G.A. Et Al. (1979) Semiproducts From Titanium Alloys. Moscow, Metallurgiya [In Russian].
4. Antonyuk, S.L., Molyar, A.G., Kalinyuk, A.N., Zamkov, V.N. (2003) Titanium Alloys For Aircraft Industry Of Ukraine. Advances In Electrometallurgy, 1, 9-12.
5. Babenko, E.P., Dolzhenkova, E.V. (2014) Examination Of Destruction Causes Of Large-Sized Product From Vt23 Alloy. Metallurgicheskaya I Gornorudnaya Promyshlennost, 3, 82-85 [In Russian].
6. Paton, B.E., Trigub, N.P., Akhonin, S.V., Zhuk G.V. (2006) Electron Beam Melting Of Titanium. Kiev, Naukova Dumka [In Russian].
7. Akhonin, S.V., Severin, A.Yu., Berezos, V.A. et al. (2016) Peculiarities of melting of titanium alloy VT19 ingots in electron beam cold hearth installation. Sovrem. Elektrometall., 2, 23-27 [in Russian]. https://doi.org/10.15407/sem2016.02.03
8. Iliin, A.A., Kolachev, B.A., Polkin, I.S. (2009) Titanium Alloys. Composition, Structure, Properties: Refer. Book. Moscow, Vils-Mati [In Russian].
9. Elagina, L.A., Gordienko, A.I., Ivashko, V.V. Et Al. (1978) Influence Of Structure On Mechanical Properties Of Vt9 And Vt18 Alloys. Tekhnologiya Lyogkikh Splavov, 13, 33-38 [In Russian].
10. (1974) Instruction No. 1054?76: Metallographic Analysis Of Titanium Alloys. Moscow, Viam [In Russian].

Suggested Citation

S.V. Akhonin, A.Yu. Severin, V.O. Berezos, O.M. Pikulin, V.A. Kryzhanovskyi, O.G. Yerokhin (2022) Investigations of the quality of wrought semi-finished products from VT9 titanium alloy produced by electron beam melting. The Paton Welding J., 03, 49-53.