The Paton Welding Journal, 2012, №04



2012 №04 (02)

2012 №04 (04)

---

The Paton Welding Journal, 2012, #4, 12-14 pages  

VACUUM DIFFUSION WELDING OF g-TiAl INTERMETALLIC ALLOY TO 12Kh18N10T STEEL

G.K. KHARCHENKO, A.I. USTINOV, Yu.V. FALCHENKO, L.V. PETRUSHINETS, S.G. GRIGORENKO, V.A. KOSTIN and V.P. GURIENKO

E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
A two-stage technology for vacuum diffusion welding of intermetallic alloy g-TiAl to 12Kh18N10T steel using interlayers has been developed. It is shown that application of a nanolayered interlayer of Ti-Al system from the side of intermetallic and nickel interlayer from the side of steel provides a uniform distribution of microhardness in the bond.
 
 
Keywords: vacuum diffusion welding, g-TiAl intermetallic alloy, 12Kh18N10T steel, nanolayered insert, joint zone, microstructure, microhardness
 
 
Received:                08.12.11
Published:               28.04.12
 
 
References
1. Charukhina, K.E., Golovanenko, S.A., Masterov, V.A. et al. (1970) Bimetallic joints. Moscow: Metallurgiya.
2. Gurevich, S.M., Zamkov, V.N., Blashchuk, V.E. et al. (1986) Metallurgy and technology of welding of titanium and its alloys. Kiev: Naukova Dumka.
3. Charukhina, K.E., Kazakov, N.F. (1964) Vacuum diffusion welding of dissimilar metals. Leningrad: LDNTP.
4. Kazakov, N.F. (1976) Diffusion welding of materials. Moscow: Mashinostroenie.
5. Shmakov, V.M., Izmirlieva, A.N. (1967) Diffusion welding of dissimilar metals. In: Welding of new high-strength materials. Kujbyshev.
6. He, P., Feng, J.C., Zhang, B.G. et al. (2002) Microstructure and strength of diffusion-bonded joints of TiAl base alloy to steel. Materials Characterization, 48, 401-406.
7. He, P., Feng, J.C., Zang, B.G. et al. (2003) A new technology for diffusion bonding of intermetallic TiAl to steel with composite barrier layers. Ibid., 50, 87-92.
8. Ustinov, A.I., Falchenko, Yu.V., Ishchenko, A.Ya. et al. (2009) Producing permanent joints of g-TiAl based alloys using nanolayered Ti/Al interlayer by vacuum diffusion welding. The Paton Welding J., 1, 12-15.
9. Nakao, Yo., Shinozaki, K., Hamada, M. (1991) Diffusion bonding of intermetallic compound TiAl. ISIJ Int., 31(10), 1260-1266.
10. Ustinov, A.I., Olikhovskaya, L.A., Melnichenko, T.V. et al. (2008) Solid-phase reactions in heating of multilayer Al/Ti foils produced by electron beam deposition method. Advances in Electrometallurgy, 2, 19-26.
11. Kharchenko, G.K., Shevchuk, T.V., Ignatenko, A.I. (1976) Study of niobium-nickel interlayer-steel joint made by pressure welding. Avtomatich. Svarka, 9, 71-72.

---

Suggested Citation

G.K. KHARCHENKO, A.I. USTINOV, Yu.V. FALCHENKO, L.V. PETRUSHINETS, S.G. GRIGORENKO, V.A. KOSTIN and V.P. GURIENKO (2012) VACUUM DIFFUSION WELDING OF g-TiAl INTERMETALLIC ALLOY TO 12Kh18N10T STEEL. The Paton Welding J., 04, 12-14.

---