The Paton Welding Journal, 2014, №06



2014 №06 (15)

DOI of Article 10.15407/tpwj2014.06.16

2014 №06 (17)

---

The Paton Welding Journal, 2014, #6-7, 80-83 pages  

EFFECTIVENESS OF APPLICATION OF NEW CONSUMABLES IN WELDING AND SURFACING OF COPPER AND ITS ALLOYS (Review)

V.M. ILYUSHENKO, V.A. ANOSHIN, T.B. MAJDANCHUK and E.P. LUKIANCHENKO

E.O. Paton Electric Welding Institute, NASU. 11 Bozhenko Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
 
 
Abstract
Results of investigations on development of high-efficient electrode and filler materials for welding and surfacing of copper and alloys on its base are considered. It is shown that increased requirements to quality of welded joints and deposited metal can be satisfied, primarily due to development of reliable welding consumables: electrode and filler wires, fluxes (fused and activating flux-pastes), as well as special coated electrodes. Arc welding and surfacing processes improved on their base provide the required level of thermophysical properties of welded joints, high strength and tightness of welds, reliable service durability in friction assemblies and corrosion media, etc. Effectiveness of new welding consumables is confirmed by their practical application in manufacture of welded crucible moulds of electrometallurgical furnaces, welding busbars, electrode holders, enlargement of hot-rolled coils for their further rolling, making various bimetal items by surfacing, etc. 10 Ref., 5 Tables.
 
 
Keywords: arc welding and surfacing, copper and its alloys, electrode and filler wires, fluxes, coated electrodes, welded joints, thermophysical properties, quality
 
 
Received:                15.04.14
Published:               28.09.14
 
References
1. (2013) Welding and surfacing of copper and alloys on its base. Kiev: IAW.
2. Ilyushenko, V.M., Anoshin, V.A. (1994) Advanced methods of welding of copper and its low alloys (Review). Avtomatich. Svarka, 5/6, 38-40.
3. Ilyushenko, V.M., Anoshin, V.A. (1998) Experience of application of consumables for welding and surfacing of copper and its alloys. In: Proc. of 1st Int. Conf. on «State-of-the-art and Prospects of Development of Welding Consumables in CIS Countries» (Moscow, 1998), 138-140.
4. Anoshin, V.A., Kostenko, Yu.I., Nikolaev, A.K. et al. (1982) New electrode materials for arc welding of copper. In: Advanced methods of welding and surfacing of heavy non-ferrous metals and alloys. Kiev: PWI, 13-22.
5. Ilyushenko, V.M., Anoshin, V.A., Kostenko, Yu.I. et al. (1985) Development of low-alloy wires for shielded-gas welding of copper. In: Current problems of welding of non-ferrous metals. Kiev: Naukova Dumka, 340-344.
6. Nikolaev, A.K., Kostin, S.A. (2012) Copper and heat-resistant alloys: Encycl. terminol. vocabulary. Moscow: DPK Press.
7. Ilyushenko, V.M., Anoshin, V.A., Bondarenko, A.N. et al. (2010) Development of flux-cored wires for welding and surfacing of aluminium bronze. In: Proc. of 5th Int. Conf. on Welding Consumables. Technologies. Production. Quality. Competitiveness (Kiev, 2010), 40-42.
8. Ilyushenko, V.M., Anoshin, V.A., Bondarenko, A.N. et al. (2013) Development of electrode materials for welding and surfacing of complexly alloyed bronzes. In: Abstr. of Int. Conf. on Welding and Related Technologies - Present and Future (Kiev, PWI), 72-73.
9. Korchemny, V.V., Skorina, N.V., Anoshin, V.A. (2007) Development of electrodes for welding and deposition of aluminium bronzes. The Paton Welding J., 8, 31-33.
10. Ilyushenko, V.M., Lukianchenko, E.P. (1998) Development of fluxes-pastes for surfacing of copper and some its alloys. In: Proc. of 1st Int. Conf. on «State-of-the-art and Prospects of Development of Welding Consumables in CIS Countries» (Moscow, 1998), 146-148.

---