The Paton Welding Journal, 2009, №03



2009 №03 (09)

2009 №03 (02)

---

TPWJ, 2009, #3, 2-7 pages

FORMATION OF BRAZED JOINTS ON TITANIUM ALUMINIDE

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 3, 2009 (March)
Pages                      2-7
 
 
Authors
S.V. MAKSYMOVA
E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Studied were the features of formation of brazed joints on titanium aluminide, produced by radiation heating in vacuum using brazing filler metals based on the Ti-Zr system and alloyed with other elements. It is noted that utilisation of copper and nickel containing filler metals does not allow producing a homogeneous structure of metal of the brazed seams. Alloying the Ti-Zr system with iron, manganese and other elements provides structure and properties of the brazed seams close to those of the base material.
 
 
Keywords: vacuum brazing, titanium aluminide, brazing filler metal, adhesion-active alloys, structure, eutectic, chemical heterogeneity
 
 
Received:                21.10.08
Published:               28.03.09
 
 
References
1. Kablov, E.N. (2003) VIAM - the heart of aircraft materials science. Vestnik Vozdushn. Flota, 4, 6.
2. Bochvar, G.A., Salenkov, V.S. (2004) Study of titanium aluminide based alloy with orthorhombic structure. Tekhnologiya Lyog. Splavov, 4, 44-46.
3. Kolachev, B.A., Livanov, V.A., Elagin, V.I. (1981) Metals science and heat treatment of nonferrous metals and alloys. Moscow: Metallurgiya.
4. (1999) Constitutional diagrams of binary metal systems: Refer. Book. Ed. by N.P. Lyakishev. Vol. 3, Book 1. Moscow:
Mashinostroenie.
5. (1990) Binary alloy phase diagrams. Ed. by T.V. Massalski. Ohio: ASM Int., Materials Park.
6. Bannykh, O.A., Povarov, K.B., Braslavskaya, G.S. et al. (1996) Mechanical properties of cast g-TiAl alloys. Metallovedenie i Term. Obrab. Metallov, 4, 11-14.
7. Uenishi Keisuke, Sumi Hiroyuki, Kobayashi Kojiro. (1995) Joining of intermetallic compound TiAl by using Al filler metal. Z. Metallik., 86(4), 270-274.
8. Xu, Q., Chaturvedi, M.C., Richards, N.L. et al. (2000) Diffusion brazing of TiAl alloy. In: Proc. of Int. Brazing & Soldering Conf. (April 2-5, 2000, Albuquerque, New Mexico). Ohio: ASM Int., Materials Park, 57-64.
9. Chen, S.Y., Wu, S.K., Shiue, R.K. (2003) Infrared brazing of TiAl intermetallic using Bg-8 braze alloy. Acta Mater., 51(77), 1991-2004.
10. Helmut, C. (1995) Intermetallic g-TiAl based alloy sheet materials. Zeitschrift fuer Metallkunde, 86(12), 814-822.
11. Gale, W.F., Wen, X. Shen, Y. et al. (2000) Diffusion brazing of titanium aluminide - wettability, microstructural development and mechanical properties. In: Proc. of Int. Conf. on Brazing & Soldering. (April 2-5, 2000, Albuquerque, New Mexico). Ohio: ASM Int., Materials Park, 42-49.
12. Khorunov, V.F., Maksymova, S.V., Ivanchenko, V.G. (2004) Production of brazed joints on g-TiAl and study of their properties. Adgeziya Rasplavov i Pajka Materialov, 37, 88-95.
13. Khorunov, V.F., Maksymova, S.V. (2007) Structure and properties of intermetallic alloy brazed joints. In: Proc. of National Welding Conf. (China, Hefei, Oct. 2007), 348-352.
14. Khorunov, V.F., Maksymova, S.V. (2000) Intermetallic alloy g-TiAl brazing. In: Proc. of 3rd Int. Brazing and Soldering Conf. (USA, San Antonio, Texas, 2006). Ohio: ASM Int., Materials Park, 288-292.
15. Taran, Yu.N., Mazur, V.I. (1978) Structure of eutectic alloys. Moscow: Metallurgiya.

---

Suggested Citation

S.V. MAKSYMOVA (2009) FORMATION OF BRAZED JOINTS ON TITANIUM ALUMINIDE. The Paton Welding J., 03, 2-7.

---