The Paton Welding Journal, 2014, №06



2014 №06 (11)

DOI of Article 10.15407/tpwj2014.06.12

2014 №06 (13)

---

The Paton Welding Journal, 2014, #6-7, 62-65 pages  

ROLE OF WELDING FLUX IN FORMATION OF WELD METAL DURING ARC WELDING OF HIGH-STRENGTH LOW-ALLOY STEELS

V.V. GOLOVKO, S.N. STEPANYUK and D.Yu. ERMOLENKO

E.O. Paton Electric Welding Institute, NASU. 11 Bozhenko Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
 
 
Abstract
Analysis of research results in area of welding metallurgy of high-strength low-alloy (HSLA) steels showed a change of role of welding flux in providing of weld metal quality indices. It is concluded that current welding fluxes should actively participate in processes of weld pool refining, regulation of metallurgical processes of formation of non-metallic inclusions (NMI), having certain composition, morphology and nature of distribution in solid solution, in order to provide necessary structural composition of weld metal and complex of its mechanical properties in welding of HSLA steels. Existing industrial experience allowed the authors determining that agglomerated fluxes have significant advantage in producing the welds with predicted complex of NMI. These fluxes are characterized by high technological flexibility due to regulation of their oxidizing ability, possibility to effect formation of NMI of certain composition and morphology in the welds. Welded joints, produced using these type fluxes, receive the complex of mechanical properties at the level of base metal values. 13 Ref., 7 Figures.
 
 
Keywords: high-strength low-alloy steel, welding, welding flux, non-metallic inclusions, microstructure, mechanical properties
 
 
Received:                23.04.14
Published:               28.09.14
 
References
1. Zhang, L., Thomas, B.G. (2003) State-of-the-art in evaluation and control of steel cleanliness: Review. ISIJ Int., 43(3), 271-291. https://doi.org/10.2355/isijinternational.43.271
2. Shin, S.Y., Oh, K., Lee, S. et al. (2011) Correlation study of microstructure, hardness and Charpy impact properties in heat affected zones of three API X80 line pipe steels containing complex oxides. Metal Materials Int., 17(1), 29-40. https://doi.org/10.1007/s12540-011-0205-1
3. Zinngrebe, E., Van Hoek, C., Visser, H. et al. (2012) Inclusion population evolution in Ti-alloyed Al-killed steel during secondary steelmaking process. ISIJ Int., 52(1), 52-61. https://doi.org/10.2355/isijinternational.52.52
4. Wegrzyn, T. (2011) Proposal of welding methods in terms of the amount of oxygen. Ibid., 47(1), 57-61.
5. Golovko, V.V. (2006) Influence of oxygen potential of welding fluxes on solid solution alloying in weld metal. The Paton Welding J., 10, 7-10.
6. Golovko, V.V., Pokhodnya, I.K. (2013) Effect of non-metallic inclusions on formation of structure of the weld metal in high-strength low-alloy steels. Ibid., 6, 2-10.
7. Lee, T.K., Kim, H.J., Kang, B.Y. et al. (2000) Effect of inclusion size on the nucleation of acicular ferrite in welds. ISIJ Int., 40, 1260-1268. https://doi.org/10.2355/isijinternational.40.1260
8. Grong, O., Kolbeinsen, L., Eijk, C. et al. (2006) Microstructure control of steels through dispersoid metallurgy using novel grain refining alloys. Ibid., 46(6), 824-831. https://doi.org/10.2355/isijinternational.46.824
9. Sarma, D.S., Karasev, A.V., Jonsson, P.G. (2009) On the role of non-metallic inclusions in the nucleation of acicular ferrite in steels. Ibid., 49(7), 1063-1074. https://doi.org/10.2355/isijinternational.49.1063
10. Seo, J.S., Kim, H.J., Lee, C. (2013) Effect of Ti addition on weld microstructure and inclusion characteristics of bainitic GMA welds. Ibid., 53(5), 880-886. https://doi.org/10.2355/isijinternational.53.880
11. Golovko, V.V., Podgaetsky, V.V., Bondarenko, T.P. (1993) Oxidability of slag melts of system MgO-Al₂O₃-SiO₂-CaF₂. Avtomatich. Svarka, 9, 28-30.
12. Golovko, V.V., Kostin, V.A., Zhukov, V.V. et al. (2010) Influence of alloying with manganese and titanium on peculiarities of austenite decomposition in low-alloy weld metal. Vestnik Chernig. GTU, 45, 125-133.
13. Golovko, V.V. (2012) Agglomerated fluxes in local welding production (Review). The Paton Welding J., 2, 33-35.

---

Suggested Citation

V.V. GOLOVKO, S.N. STEPANYUK and D.Yu. ERMOLENKO (2014) ROLE OF WELDING FLUX IN FORMATION OF WELD METAL DURING ARC WELDING OF HIGH-STRENGTH LOW-ALLOY STEELS. The Paton Welding J., 06, 62-65.

---