The Paton Welding Journal, 2018, №12



2018 №12 (06)

DOI of Article 10.15407/tpwj2018.12.07

2018 №12 (08)

---

The Paton Welding Journal, 2018, #11-12, 70-76 pages
 

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                      0957-798X (print)
Issue                       #11-12, 2018 (November)
Pages                      70-76
 
 

Diffusion welding and brazing of dissimilar materials with controlled stress-strain state

V.V. Kvasnytskyi¹, V.F. Kvasnytskyi², Chen Hexing³, M.V. Matvienko² and G.V. Yermolayev²

¹NTTU «Igor Sikorskii Kyiv Polytechnic Institute» 37 Prosp. Peremohy, 03056, Kyiv, Ukraine. E-mail: kvas69@ukr.net
²Adm. Makarov National Shipbuilding University 9 Heroiv Ukrainy Prosp., 54025, Mykolaiv, Ukraine. E-mail: welding@nuos.edu.ua
³Guangdong Academy of Sciences No.9, Building, 100 Xianlie Rd. Guangzhou, P. R. China. E-mail: chenhexing@gdas.gd.cn

Stress-strain state in vacuum diffusion welding and brazing of dissimilar materials was studied, allowing for plastic deformations of instantaneous plasticity and creep. The role of plastic deformations in joint formation and residual stresses in vacuum diffusion welding of dissimilar metals, in particular of metals with nonmetals, as well as similar materials with interlayers is considered. Application of temperature loading simultaneously with external load at vacuum diffusion welding of dissimilar metals allows creating a bulk stressed state in the butt joint, with formation of axial, radial, circumferential, tangential stresses, promoting localization of plastic deformations in the butt joint zone and development of shear deformations, and intensification of the processes of formation of physical contact, activation of the surfaces and development of diffusion processes, respectively. Control of stress-strain state at joining of metals with nonmetals allows regulation of relaxation processes at cooling and prevention of joint fracture. 12 Ref., 9 Figures.
Keywords: diffusion welding, brazing, stresses, strains, modeling, structure, mechanical properties, diffusion
 
Received:                30.03.18
Published:               23.11.18
 
 
References
1. Krivtsun, I.V., Kvasnytskyi, V.V., Maksymov, S.Yu., Ermolayev, H.V. (2017) Special methods of welding. Ed. by B.E. Paton. Mykolaiv, NUK [in Ukrainian].
2. Ermolayev, H.V., Kvasnytskyi, V.V., Kvasnytskyi,V.F. et al. (2015) Brazing of materials. Ed. by V.F.Khorunov et al. Mykolaiv, NUK [in Ukrainian].
3. Makhnenko, V.I., Kvasnitsky, V.F. (2009) Peculiarities of formation of stress-strain state in diffusion bonds between dissimilar materials. The Paton Welding J., 8, 7-11.
4. Kvasnytskyi, V.V., Ermolayev, H.V., Matvienko, M.V. (2017) Mechanics of joints in diffusion welding, brazing and spraying of dissimilar materials under elasticity conditions. Nikolaev, NUK [in Russian].
5. Kvasnitsky, V.V., Zolotoj, Yu.G., Labartkava, A.B. et al. (2008) Experimental investigation of deformation of welded assembly of bush-bush type from dissimilar materials: Transact. NUK, Mykolaiv, NUK, 4, 65-73 [in Russian].
6. Kazakov, N.F. (1976) Diffusion welding of materials. Moscow, Mashinostroenie [in Russian].
7. Lobanov, L.M., Ermolayev, H.V., Kvasnytskyi, V.V. et al. (2016) Stresses and strains in welding and brazing. Ed. by L.M. Lobanov. Mykolaiv, NUK [in Ukrainian].
8. Kvasnitsky, V.V., Kvasnitsky,V.F., Markashova, L.I., Matvienko, M.V. (2014) Effect of stress-strain state on structure and properties of joints in diffusion welding of dissimilar metals. The Paton Welding J., 8, 8-14. https://doi.org/10.15407/tpwj2014.08.01
9. Emelyanov, V.M., Kvasnytskyi, V.V., Ermolayev, H.V. et al. (2009) Optimization of structure of metal-graphite slide-bearings on the base of residual stresses analysis in brazed assemblies. Vestnik Khersonsk. NTU. Kherson, KhNTU, 3, 42-46 [in Russian].
10. Ermolaev, G.B., Martynenko, V.A., Olekseenko, S.V. et al. (2017) Effect of the rigid interlayer thickness on the stress-strain of metal-grafite assemblies under thermal loading. Strength of Materials, May, 49(3) 422-428. https://doi.org/10.1007/s11223-017-9882-4
11. Kopelman, L.A. (2010) Principles of theory of strength of welded structures. St.-Petersburg, Lan [in Russian].
12. Kvasnytskyi, V.V., Kvasnytskyi,V.F., Dong Chunlin, Matvienko, M.V. et al. (2018) Stressed state of welded and brazed assemblies from similar materials with a soft interlayer under axial loading. The Paton Welding J., 4, 6-10. https://doi.org/10.15407/tpwj2018.04.01

---

Suggested Citation

V.V. Kvasnytskyi, V.F. Kvasnytskyi, Chen Hexing, M.V. Matvienko and G.V. Yermolayev (2018) Diffusion welding and brazing of dissimilar materials with controlled stress-strain state. The Paton Welding J., 12, 70-76.

---