The Paton Welding Journal, 2022, №03



2022 №03 (08)

DOI of Article 10.37434/tpwj2022.03.01

2022 №03 (02)

---

The Paton Welding Journal, 2022, #3, 9-18 pages

Characteristics of high-frequency pulsed current arc with refractory cathode

I. Krivtsun¹, V. Demchenko¹, I. Krikent¹, U. Reisgen², O. Mokrov², R. Sharma²

¹E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: krivtsun@paton.kiev.ua
²RwtH Aachen University, iSf – welding and Joining institute pontstr. 49, 52062, Aachen, germany

Abstract
A self-consisted mathematical model is presented, describing nonstationary processes of energy, momentum, mass and charge transfer in plasma column and anode boundary layer of an electric arc burning in atmospheric pressure inert gas at pulsed modulation of current. A numerical study of distributed and integrated characteristics of 2 mm long argon arc was performed in the case of current modulation by rectangular pulses at 10 kHz frequency and different values of the duty cycle (0.3; 0.5; 0.7) under the condition that the average current value remains unchanged and equal to 140 A. Calculated time dependencies of plasma temperature, velocity and current density in the arc column centre, as well as axial values of plasma temperature and pressure near the anode surface, anode current density and heat flux into the anode are given for the selected values of duty cycle. Radial distributions of averaged over the current modulation period heat flux, introduced by the arc into the anode, pressure and force of friction of arc plasma flow on its surface were calculated, which are the determinant ones for simulation of thermal and hydrodynamic processes in the metal being welded in tig welding with high-frequency pulsed current (HfpC) modulation. Results of simulation of nonstationary arc characteristics are compared with the respective results for a direct current (DC) arc, at current equal to average value of modulated current. Analysis of the obtained results leads to the conclusion that in the case of HFPC TIG welding at 10 kHz frequency decrease of duty cycle (increase of pulse current) at constant value of average current leads to greater force impact of such an arc on weld pool metal and to increase of its penetrability, respectively.
Keywords: electric arc, refractory cathode, arc column, anode boundary layer, tig welding, pulsed current modulation, frequency, duty cycle, simulation

Received: 13.04.2022
Accepted: 16.05.2022

References

1. (2011) Welding fundamentals and processes. Ed. by t.J. lienert, S.S. babu et al. ASM Handbook, ohio, USA. ASM int. 2. leither, R.E., McElhinney, g.H., pruitt E.l. (1973) An investigation of pulsed gtA welding variables. Welding J., Res. Suppl., 9, 405s-410s.
3. Omar, A.A., Lundin, C.D. (1979) pulsed plasma-pulsed gtA arcs: A study of the process variables. Welding J., Res. Suppl., 4, 97s-105s.
4. Saedi, H.R., Unkel, W. (1988) Arc and weld pool behavior for pulsed current gtAw. Welding J., Res. Suppl., 11, 247s-255s.
5. Onuki, J., Anazawa, Y., Nihei, M., et al. (2002) Development of a new high-frequency, high-peak current power source for high constricted arc formation. Japan J. Appl., Phys., 41, 5821-5826. https://doi.org/10.1143/JJAP.41.5821
6. KarunakarAn, N., Balasubramanian, V. (2011) Effect of pulsed current on temperature distribution, weld bead profiles and characteristics of gas tungsten arc welded aluminum alloy joints. Transact. Nonferrous Met. Soc. China, 21, 278-286. https://doi.org/10.1016/S1003-6326(11)60710-3
7. Cunha, T.V.d., Louise-Voigt, A., Bohorquez, C.E.N. (2016) Analysis of mean and RMS current welding in the pulsed tig process. J. of Materials Proc. Technology, 231, 449-455. https://doi.org/10.1016/j.jmatprotec.2016.01.005
8. Silva, D.C.C., Scotti, A. (2017) Using either mean and RMS values to represent current in modeling of arc welding bead geometries. J. of Materials Proc. Technology, 240, 382-387. https://doi.org/10.1016/j.jmatprotec.2016.10.008
9. Kim, W.H., Na, S.J. (1998) Heat and fluid flow in pulsed current gtA weld pool. Int. J. of Heat and Mass Transfer, Vol. 41(Issue 21), 3213-3227. https://doi.org/10.1016/S0017-9310(98)00052-0
10. Wu, C.S., Zheng, W., Wu, L. (1999) Modeling the transient behaviour of pulsed current tungsten-inert-gas weld pools. Modelling and Simul. Mater. Sci. Eng., 7(1), 15-23. https://doi.org/10.1088/0965-0393/7/1/002
11. Traidia, A., Roger, F., Guyot, E. (2010) optimal parameters for pulsed gas tungsten arc welding in partially and fully penetrated weld pools. Int. J. of Thermal Sci., 49, 1197-1208. https://doi.org/10.1016/j.ijthermalsci.2010.01.021
12. Krivtsun, i., Demchenko, V., Krikent, i. et al. (2015) Distributed and integrated characteristics of the near-anode plasma of the welding arc in TIG and Hybrid (TIG + CO2 laser) welding. in: Mathematical Modelling of Weld Phenomena 11. Techn. Universitat Graz, Graz, Austria, 837-874. https://doi.org/10.15407/tpwj2015.04.01
13. Krivtsun, i., Demchenko, V., lesnoi, A. et al. (2010) Modelling of electromagnetic processes in system "welding arc- evaporating anode". pt 1: Model of anode region. Sci. and Technol. of Welding & Joining, 15(6), 457-463. https://doi.org/10.1179/136217110X12665778348506
14. Semenov, i.l., Krivtsun, i.V., Reisgen, U. (2016) numerical study of the anode boundary layer in atmospheric pressure arc discharges. J. Phys. D: Appl. Phys., 49(10), 105204. https://doi.org/10.1088/0022-3727/49/10/105204
15. Demchenko, V.f., boi, U., Krivtsun, i.V., Shuba, i.V. (2017) Effective values of electrodynamic characteristics of the process of nonconsumable electrode welding with pulse modulation of arc current. The Paton Welding J., 8, 2-11. https://doi.org/10.15407/tpwj2017.08.01
16. Sydorets, V.n., Krivtsun, i.V., Demchenko, V.f. et al. (2016) Calculation and experimental research of static and dynamic volt-ampere characteristics of argon arc with refractory cathode. The Paton Welding J., 2, 2-8. https://doi.org/10.15407/tpwj2016.02.01
17. Wendelstorf, J., Simon, G., Decker, I. et al. (1997) investigation of cathode spot behavior of atmospheric argon arcs by mathematical modeling. in: Proc. of the 12th Int. Conf. on Gas Discharges and their Applications (Germany, Greifswald, 1997), Vol. 1, 62-65.
18. Benilov, M.S., Marotta, A. (1995) A model of the cathode region of atmospheric pressure arcs. J. Phys. D: Appl. Phys., Vol. 28, 1869-1882. https://doi.org/10.1088/0022-3727/28/9/015
19. Cressault, y., Murphy, A.b., Teulet, Ph. et al. (2013) thermal plasma properties for Ar-Cu, Ar-Fe and Ar-Al mixtures used in welding plasma processes: II . Transport coefficients at atmospheric pressure. J. Phys. D: Appl. Phys., Vol. 46, 415207. https://doi.org/10.1088/0022-3727/46/41/415207
20. Essoltani, A., Proulx, P., Boulos, M.I. et al. (1994) Volumetric emission of argon plasma in the presence of vapours of fe, Si and Al. Plasma Chem. and Plasma Proc., 14(4), 437-450. https://doi.org/10.1007/BF01570206

---

Suggested Citation

I. Krivtsun, V. Demchenko, I. Krikent, U. Reisgen, O. Mokrov, R. Sharma (2022) Characteristics of high-frequency pulsed current arc with refractory cathode. The Paton Welding J., 03, 9-18.

---