Automatic Welding, 2022, №07



2022 №07 (05)

DOI of Article 10.37434/as2022.07.06

2022 №07 (07)

---

Avtomaticheskaya Svarka (Automatic Welding), #7, 2022, pp. 37-41

Hardacing of press tool for non-ferrous metals using selfshielded flux-cored wire 50Kh6V2GSMFA

I.O. Boiko¹, V.V. Pashynskyi², O.G. Pashynska², M.M. Parovishnik³

¹Technical University «Metynvest Polytekhnyka». 88 Gaidar Str., 87500, Mariupol, Ukraine.
²E.O. Paton Electric Welding Institute of the NAS of Ukraine. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
³LLC «ZCM». 42 Heroiv pratsi Str. 84500, Bakhmut, Ukraine

The work is devoted to development of the method of restoration of worn press tools from 3Kh3M3F steel for extrusion of non-ferrous alloys by mechanized hardfacing with self-shielded flux-cored wire. The advantages and disadvantages of different classes of hardfacing materials are considered and use of 50Kh6V2GSMFA steel is proposed. In the case of hardfacing with selfshielded flux-cored wire the alloying part of this steel provides a higher hardness at high working temperatures of pressing, due to a complex hardening of the martensite matrix with carbides of tungsten, chromium and other elements, as well as additional hardening by vanadium nitride. It allowed increasing the tool life. Moreover, alloying by chromium at the level of 5.5 – 6.0% improved adhesion to the processed metal. Resistance to thermal erosion and thermal fatigue strength of the deposited layer was increased by selection and optimization of gas-slag-forming components. Industrial trails of hardfaced steel 50Kh6V2GSMFA, first applied for restoration and hardening of the hot pressing matrices from 3Kh3M3F steel, were conducted at LLC “ZCM” (city of Bakhmut). Compared to new unsurfaced matrices, those restored by hardfacing demonstrated 2.4…2.5 times higher durability, while working diameter drawdown after 5 pressing cycles decreased three times. Total cost of matrix restoration by surfacing is 1.5 – 20 times lower than that of a new matrix from 3Kh3M3F steel. 19 Ref., 4 Fig.
Keywords: press tools, wear, resistance to thermal erosion, adhesion resistance, hardfacing, self-shielded flux-cored wire, medium-chrome steel, durability, restoration cost


Received: 25.05.2022

References

1. Grin, A.G., Presnyakov, V.A., Boiko, I.A., Volkov, S.M. (2011) Analysis of causes of working bushing wear in pressing of billets on hydraulic presses. Visnyk DGMA, Kramatorsk, 1(7Е), 27-32 [in Russian]. http://www.dgma. donetsk.ua/science_public/science_vesnik/TITUL.html
2. Rajieva, R., Sadagopan, P., Shanmuga, Prakasha R. (2020) Study on investigation of hot forging die wear analysis - An industrial case study. Materials Today: Proceedings, 27, 3, 2752-2757. https://doi.org/10.1016/j.matpr.2019.11.330
3. Yuzvenko, Yu.A., Kirilyuk, G.A., Maltsev, N.A. (1976) Selection of composition for hardfacing of extrusion tool. Svarochn. Proizvodstvo, 1, 22-23 [in Russian].
4. Karpenko, V.M., Koshevoj, A.D., Katrenko, V.T. et al. (1980) Optimization of deposited metal composition for extrusion tool. In: Theoretical and technological fundamentals of surfacing. Surfacing of parts and equipment of metallurgy and power engineering. Kyiv, PWI, 42-48 [in Russian].
5. Correa, E.O., Alcântara, N.G., Valeriano, L.C. et al. (2015) The effect of microstructure on abrasive wear of a Fe-Cr-C- Nb hardfacing alloy deposited by the open arc welding process. Surface and Coatings Technology, 276, 25 August, 479-484. https://doi.org/10.1016/j.surfcoat.2015.06.026
6. Eremin, E.N., Losev, A.S. (2015) Wear Resistance Increase of Pipeline Valves by Overlaying Welding Flux-cored Wire. Procedia Engineering, 113, 435-440. https://doi.org/10.1016/j.proeng.2015.07.324
7. Patricio F. Mendez, Nairn, Barnes, Kurtis, Bell et al. (2014) Welding processes for wear resistant overlays. Journal of Manufacturing Processes, 16, 1, 4-25, https://doi.org/10.1016/j.jmapro.2013.06.011
8. Xiaoru, Hou, Bin, Zhao, Jian, Yang et al. (2014) Fe-0.4wt.% C-6.5 wt.%Cr hardfacing coating: Microstructuresand wear resistance with La2O3 additive. Applied Surface Science, 317, 30 October, 312-318. https://doi.org/10.1016/j.apsusc.2014.08.118
9. Xiang Luo, Zidong Wang, Xiaohua Chenc Yanlin Wangb Guang Xu. (2021) Modifying of microstructure and toughness in the weld metal prepared by welding wire containing nanosized titanium oxides. Materials Science and Engineering: A, 807, 11 March. 140897, https://doi.org/10.1016/j.msea.2021.140897
10. Jurandir Marcos, Sá de Sousa, Mauro Quaresma Lobato et al. (2021) Abrasion resistance of Fe-Cr-C coating deposited by FCAWwelding process. Wear, 476, 15 July. 203688 https://doi.org/10.1016/j.wear.2021.203688
11. Karsten Gunthe, Jean Pierre Bergmann, Dirk Suchodoll. (2018) Hot wire-assisted gas metal arc welding of hypereutectic Fe- Cr-C hardfacing alloys: Microstructure and wear properties. Surface and Coatings Technology, 334, 25 January, 420-428. https://doi.org/10.1016/j.surfcoat.2017.11.059
12. Dashuang, Liu, Jiayou, Wang, Yu, Zhang et al. (2019) Effect of Mo on microstructure and wear resistance of slag-free selfshielded metal-cored welding overlay. Journal of Materials Processing Technology, 270, August, 82-91. https://doi.org/10.1016/j.jmatprotec.2019.02.024
13. Grin, A.G., Boiko, I.A., Degtyarenko, N.A. (2010) Influence of carbon-forming component of flux-cored wire on nonmetallic inclusions in deposited metal. Visnyk DGMA, 2(19), 83-87 [in Russian].
14. Karpenko, V.M., Koshevoj, A.D., Katrenko, V.T. (1989) Fluxcored wire for hardfacing of extrusion tool: Express-information. Svarka, Termoobrabotka, Pokrytiya, 3, 1-7 [in Russian].
15. Koshevoj, A.D., Karpenko, V.M., Presnyakov, V.A. (2000) Study of metal alloying process in hardfacing by self-shielded flux-cored wire of extrusion tool. Zakhyst Metalurg. Mashyn vid Polomok, Mariupol, 5, 271-276 [in Russian].
16. Bilyk, G.B., Karpenko, V.M., Dorofeev, Yu.D., Bogutsky, A.D. (1979) Optimization of composition of gas-slagforming components of self-shielded flux-cored wire. Avtomatich. Svarka, 2, 42-50 [in Russian].
17. Grin, A.G., Boiko, I.A. (2012) Examination of chromium and carbon influence in deposited metal on strength of adhesion with copper alloy in hot pressing. Visnyk DGMA, 3(28), 100- 103 [in Russian].
18. Gryn, O.G., Boiko, I.O., Presnyakov, V.A. et al. (2006) Composition of flux-cored wire. Pat. on utility model 75517, Int. Cl. B23K 35/30 (2006.01), No. u201204055; fill., 02.04.2012; publ. 10.12.2012 [in Ukrainian]. https://doi.org/10.12677/fin.2012.21003
19. Boiko, I.O., Gryn, O.G. (2006) Method of determination of material hardness at higher temperatures. Pat. on utility model 78770 Int. Cl. G01N 3/40 (2006.01), G01N 3/54 (2006.01); No. u201212755; fill. 09.11.2012; publ. 25.03.2013 [in Russian].

---

Advertising in this issue:

---