Automatic Welding, 2025, №03

2025 №03 (06)

DOI of Article 10.37434/as2025.03.07

2025 №03 (08)

---

"Avtomatychne Zvaryuvannya" (Automatic Welding), #3, 2024, pp. 45-50

Methods for increasing fatigue life of deposited parts (Review)

I.O. Ryabtsev, A.A. Babinets, I.I. Ryabtsev, I.P. Lentyugov

E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: ryabtsev39@gmail.com

A review of literature data on the problem of increasing the fatigue life of welded parts operated under the simultaneous action of various types of wear and cyclic mechanical loads is presented. It is shown that an increase in the fatigue life of deposited parts can be achieved by rational selection and optimisation of the chemical composition of surfacing materials, development of the optimal design of deposited layers and use of the technology of sequential surfacing of hard wear-resistant layers and intermediate layers with high ductile characteristics. Ref. 29, Fig. 5.
Keywords: arc surfacing, multilayer surfacing, repair surfacing, ductile sublayer, fatigue life, fatigue cracks, stress intensity factor


Received: 27.11.2024
Received in revised form: 12.02.2025
Accepted: 24.03.2025

References

1. Ryabtsev, I., Fomichov, S., Kuznetsov, V. et al. (2023) Surfacing and additive technologies in welded fabrication. Springer Nature Switzerland AG. DOI: https://doi.org/10.1007/978-3-031-34390-2
2. Ryabtsev, I.A., Senchenkov, I.K., Turyk, E.V. (2025) Surfacing. Materials, technologies, mathematical modeling. Gliwice, Poland.
3. Czuchryj, J. (1991) Effects of arc surfacing on the fatigue strength of shafts. Welding Intern., 5(11), 867–870. DOI: https://doi.org/10.1080/09507119109446804
4. Gulakov, S.V., Chigarev, V.V., Ivanov, V.P. et al. (2004) Improvement of technology for hardfacing of metallurgical equipment components. The Paton Welding J., 10, 48-51.
5. Ivanov, V.P., Stepnova, Yu.A. (2015) Improvement of technology for hardfacing of standard hot rolls by heterogeneous working layer. Visnyk PDTU. Seriya: Tekhnichni Nauky, 31, 98–105. DOI: https://doi. org/10.31498/2225-6733.31.2015.71147
6. Dudnikov, A., Dudnikov, I., Kelemesh, A., Gorbenko, O. (2019) Improving the technology of part machining by surface plastic deformation. Eastern-European J. of Enterprise Technologies, 6, 1, 26–32. DOI: https://doi.org/10.15587/1729-4061.2019.183541
7. Makhnenko, V.I., Shekera, V.M., Kravtsov, T.G., Sevryukov, V.V. (2001) Effect of subsequent mechanical treatment on redistribution of residual stresses in surfaced shafts. The Paton Welding J., 7, 2–5.
8. Zakharova, I. (2024) Welding processes in the restoration of industrial and energy facilities. Machinery & Energetics, 15(1), 56–64. DOI: https://doi.org/10.31548/machinery/1.2024.56
9. Chigaryov, V.V., Shchetinina, V.I., Shchetinin, S.V. et al. (2009) Increase of crack resistance of shrouded traveling rolls in high-speed hardfacing. The Paton Welding J., 1, 22–25. 10. Shchetinin, S.V. (2016) Improvement of crack r esistance of banded supporting rolls at high-speed surfacing with low heat input. The Paton Welding J., 8, 10–14. DOI: https://doi.org/10.15407/tpwj2016.08.03
11. Krukovich, M.G., Klochkov, N.P., Savelieva, A.S. (2014) Ways for improvement of service life of parts restored by surfacing methods. Novye Materialy i Tekhnologii v Mashinostroenii, 20, 45–50.
12. Brodovoj, V.A., Gushcha, O.I., Kuzmenko, A.Z., Mikheev, P.P. (2001) Interaction of residual stresses in the zones of stress concentrators and fatigue cracks. The Paton Welding J., 9, 42–43.
13. Gopkalo, A.P., Klipachevsky, V.V. (2015) Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets. The Paton Welding J., 5-6, 140–141. DOI: https://doi.org/10.15407/tpwj2015.06.31
14. Brodovoj, V.A., Mikheev, P.P., Knysh, V.V. et al. (2003) Effectiveness of fatigue crack retardation by the field of compressive residual stresses. The Paton Welding J., 8, 49–50.
15. Samotugin, S.S., Leshchinsky, L.K., Mazur, V.A., Samotugina, Yu.S. (2013) Tool materials: properties and hardening. Mariupol, PGTU.
16. Leshchinsky, L.K., Samotugin, S.S. (2005) Lamellar surfaced and hardened compositions.Mariupol, Novyi Mir.
17. Dombrovsky, F.S, Leshchinsky, L.K. (1995) Serviceability of surfaced rolls of billet continuous casting machines. Kyiv, PWI.
18. Korotkov, V.A., Chubelov, V.A. (2000) Depositing contact‐loaded surfaces with alternating hard and soft sections. Welding Intern., 14(9), 722–724. DOI: https://doi.org/10.15407/10.1080/09507110009549257
19. Ryabtsev, I.O., Knysh, V.V., Babinets, A.A., Solovei, S.O. (2022) Fatigue life of surfaced parts. Kyiv, Interservice.
20. Ryabtsev, I.A., Babinets, A.A., Ryabtsev, І.І. (2016) Fatigue life of multilayer hard-faced specimens. Welding Intern., 30(4), 305–309. DOI: https://doi.org/10.1080/01431161.2015.1058004
21. Ryabtsev, I.A., Senchenkov, I.K. (2013) Theory and practice of surfacing works. Kyiv, Ekotekhnologiya.
22. Senchenkov, I.K., Chervinko, O.P., Ryabtsev, I.A. (2015) Calculation of fatigue life of cylindrical parts at multilayer surfacing and service cyclic thermo-mechanical loading. The Paton Welding J., 5-6, 134–139. DOI: https://doi.org/10.15407/tpwj2015.06.30
23. Senchenkov, I.K., Chervinko, O.P., Ryabtsev, I.A., Babinets, A.A. (2014) Determination of the service life of hardfaced components under thermal and cyclic loading. Welding Intern., 28, 1, 80–84. DOI: https://doi.org/10.1080/09507116.2013.796661
24. Babinets, A.A., Ryabtsev, I.A., Kondratiev, I.A. et al. (2014) Investigation of thermal resistance of deposited metal designed for restoration of mill rolls. The Paton Welding J., 5, 16–20. DOI: https://doi.org/10.15407/tpwj2014.05.03
25. Barvinko, A.Yu., Knysh, V.V., Barvinko, Yu.P., Yashnik, A.N. (2012) Development of surface crack-like defect in welded joints of 06GB-390 steel at cyclic loading. The Paton Welding J., 5, 40–42.
26. Knysh, V.V., Solovei, S.O. (2013) Increase in fatigue resistance of welded joints with accumulated fatigue damage. Visnyk TNTU, 3, 189–197.
27. Knysh, V.V. (2014) Method of calculation assessment of cyclic crack resistance in metal cyclic elements taking into account the influence of welding residual stresses. In: Fracture mechanics and physics of construction materials and structures. Ed. by Y.Y.Luchko. Lviv, Issue 10, 239–250.
28. Knysh, V.V., Solovej, S.A., Nyrkova, L.I. et al. (2016) Improvement of cyclic fatigue life of tee welded joints by high-frequency mechanical peening under the conditions of higher humidity and temperature. The Paton Welding J., 3, 19–24. DOI: https://doi.org/10.15407/tpwj2016.03.02
29. Ryabtsev, I.O., Babinets, A.A., Student, O.Z. et al. (2022) Substantiation of the choice of materials for surfacing based on the fractographic analysis of fatigue fractures. Mater. Sci., 58(1), 126–134. DOI: https://doi.org/10.1007/ s11003-022-00640-8