The Paton Welding Journal, 2024, №10



2024 №10 (03)

DOI of Article 10.37434/tpwj2024.10.04

2024 №10 (05)

---

The Paton Welding Journal, 2024, #10, 26-29 pages

Obtaining wear-resistant coatings by surfacing with powder core welding wire

Z. Mirijanashvili¹, G. Dadianidze¹, O. Tsagareishvili¹, B. Salaridze¹, L. Chkhartishvili^1,2

¹F. Tavadze Metallurgy and Materials Science Institute 8b Elizbar Mindeli Str., 0186, Tbilisi, Georgia
²Georgian Technical University, 77 Merab Kostava Ave., 0160, Tbilisi, Georgia. E-mail: levanchkhartishvili@gtu.ge

Abstract
A modification of hard and wear-resistant coatings fabricating technology by substrates surfacing with powder core welding wire is proposed. Nichrome or steel tapes are used as welding wire shells, while the specially produced CrB2–Al2O3 and (TiCr) B2–Al2O3 composite powders, as well as commercially available Cr3C2 powder, serve for cores. The microstructure of one-, two- and three-layer surface welds reveals the presence of carbide–boride and aluminum oxide phases, which improve their tribological properties.
Keywords: arc surfacing, hard powder, powder core wire, wear resistance

Received: 12.08.2024
Received in revised form: 12.09.2024
Accepted: 21.10.2024

References

1. Sheinman, E.L. (2005) Abrasive wear. Review. Friction & Wear, 26(1), 100–111.
2. Gordeziani, A. (2013) Electrophysical technologies for metal processing and strengthening. Tbilisi, Tech. Univ. Press.
3. Gusev, A.I., Usol'tsev, A.A., Kozyrev, N.A. et al. (2018) Fluxcored wire for the surfacing of parts subject to wear. Steel Transl., 48(11), 724-731. https://doi.org/10.3103/S0967091218110037
4. Mirijanashvili, Z., Khutsishvili, M., Dadianidze, G., Saralidze, B. (2020) Development of new wear-resistant welding material. In: Proc. of Inter. Sci. Tech. Conf. on Environ. Protec. Sustain. Develop., Tbilisi, Tech. Univ. Press, 31–36.
5. Junsheng, M., Xiaoping, Sh., Shaojun, Zh. et al. (2021) Powder- cored welding wire, preparation method and application thereof, porous coating and preparation method thereof. Pat. CN 110819931 B, October 12.
6. Hanguang, F., Xianwu, L., Haiyun, N. et al. (2023) High-boron iron-based alloy wear-resistant welding wire and using method thereof. Pat. CN 113878262 B, March 21.

---

Suggested Citation

Z. Mirijanashvili, G. Dadianidze, O. Tsagareishvili, B. Salaridze, L. Chkhartishvili (2024) Obtaining wear-resistant coatings by surfacing with powder core welding wire. The Paton Welding J., 10, 26-29.

---