| 2017 №01 (07) |
DOI of Article 10.15407/sem2017.01.08 |
2017 №01 (01) |
Electrometallurgy Today (Sovremennaya Elektrometallurgiya), 2017, #1, 44-52 pages
Application of integrated calculation-analytic method for multi-criterion optimizing of compositions of casting heat-resistant nickel alloys
S.V. Gaiduk1, V.V. Kononov1, V.V. Kurenkova2
1Zaporozhye National Technical University. 64 Zhukovsky Str., 690063, Zaporozhye, Ukraine. E-mail:rector@zntu.edu.ua
2Company «Paton Turbine Technologies». 26 Paketnaya Str., 03028, Kiev, Ukraine. E-mail: vkurenkova@patontt.com
An integrated calculation-analytical method was developed, which includes both the traditional methods, and also obtained regression models in the algorithm for forecasting calculation of parameters determining the serviceability of casting heat-resistant alloys. The method allows designing the new compositions and modifying the compositions of known industrial alloys with a required level of service characteristics by the multi-criterial optimizing of composition without carrying out the intermediate experiments. Ref. 25, Tables 14, Figure 1.
Keywords: heat-resistant nickel alloys; alloying system; criteria (parameters)of serviceability; multi-criterial optimization; regression equation; regression model; integrated calculation-analytic method 1. Kablov Ye. N. Liteynye zharoprochnye splavy. Effekt S. T. Kishkina: nauch.-tekhn. sb.: k 100-letiyu so dnya rozhdeniya S. T. Kishkina; pod red. Ye. N. Kablova.- M.: Nauka, 2006.- 272 s.
2. Kablov Ye. N. 75 let. Aviatsionnye materialy. Izbrannye trudy VIAM 1932-2007 / Yubileyny nauch.-tekhn. sb. pod red. Ye. N. Kablova.- M.: VIAM, 2007.- 439 s.
3. Shalin R. Ye. Monokristally nikelevykh zharoprochnykh splavov / Shalin R. Ye. i dr.- M.: Mashinostroyeniye, 1997.- 336 s.
4. H. Harada et al. (1988) Phase calculation and its use in alloy design program for nickelbase superalloys. Superalloys: A publ. of the Met. Soc. of AIME (USA). Champion (Pennsylvania) TMS, 733-742.
5. Sims Ch. T., Stoloff N. S., Khagel U. K. Supersplavy II. Zharoprochnye materialy dlya aerokosmicheskikh i promyshlennykh energoustanovok; per. s angl.: v 2-kh kn.: pod red. R. Ye. Shalina.- M.: Metallurgiya, 1995.- 384 s.
6. Logunov A. V., Shmotin Yu. N., Danilov D. V. (2014) Metodologicheskiye osnovy avtomatizirovannogo proyektirovaniya zharoprochnykh splavov na nikelevoy osnove. Chast II. Tekhnologiya metallov, 6, S3-10.
7. Logunov A. V., Shmotin Yu. N., Danilov D. V. (2014) Metodologicheskiye osnovy avtomatizirovannogo proyektirovaniya zharoprochnykh splavov na nikelevoy osnove. Chast III. Tekhnologiya metallov, 7, 3-11.
8. Logunov A. V., Shmotin Yu. N., Danilov D. V. Metodologicheskiye osnovy avtomatizirovannogo proyektirovaniya zharoprochnykh splavov na nikelevoy osnove. (2014) Chast I. Tekhnologiya metallov, 5, 3-9.
9. Zharoprochnye splavy dlya gazovykh turbin. Materialy mezhdunarodnoy konferentsii / D. Kotsoradis i dr.; per. s angl. pod red. R. Ye. Shalina.- M.: Metallurgiya, 1981.- 480 s.
10. Nauchnye osnovy legirovaniya zharoprochnykh nikelevykh splavov, stoykikh protiv vysokotemperaturnoy korrozii (VTK) / A. D. Koval i dr.- Zaporozh. mashinostr. in-t, 1990.- 56 s.- (Preprint / KIEV UMK VO; ZMI 1990).
11. Nikitin V. I. Korroziya i zashchita lopatok gazovykh turbin.- L.: Mashinostroyeniye, 1987.- 272 s.
12. Nikitin V. I., Revzyuk M. B., Komisarova I. P. (1978) Vliyaniye sostava nikelevykh splavov na ikh korrozionnuyu stoykost v zole gazoturbinnogo topliva. Trudy TsKTI im. I. I. Polzunova, Vyp. 158, 71-74.
13. M. Morinaga et al. (1984) New PHACOMP and its application to alloy designe. Supearalloys 1984, AIME, 523-532.
14. Morozova G. I. (2012) Kompensatsiya disbalansa legirovaniya zharoprochnykh nikelevykh splavov. Metallovedeniye i termicheskaya obrabotka metallov, 12, 52-56.
15. Morozova G. I. (1993) Sbalansirovannoye legirovaniye zharoprochnykh nikelevykh splavov. Metally, 1, 38-41.
16. Saunders N., Fahrmann M., Small C. J. (2000) The Application of CALPHAD calculations to Ni-based superalloys. Superalloys 2000.- TMS.- Warrendale, , 803. https://doi.org/10.7449/2000/superalloys_2000_803_811
17. Caron P. (2000) High ??-solvus new generation nickel-based superalloys for single crystal turbine blade applications. Superalloys 2000. A Publ. of the TMS. Seven Springs Mountain Resort in Champion, Pennsylvania // Minerals, Metals & Materials Society, , 737-746. https://doi.org/10.7449/2000/superalloys_2000_737_746
18. Zhukov A. A., Smirnova O. A. (2004) Otsenka temperatury polnogo rastvoreniya ??-fazy zharoprochnykh nikelevykh splavov na osnove analiza dvoynykh diagramm sostoyaniya. Zagotovitelnye proizvodstva v mashinostroyenii, 11, 44-47.
19. Zhukov A. A., Smirnova O. A. (2005) Otsenka ekspluatatsionnoy prigodnosti zharoprochnykh splavov dlya GTD i GTU. Aviatsionnokosmicheskaya tekhnika i tekhnologiya, 10, 60-66.
20. Gaiduk S.V., Kononov V.V., Kurenkova V.V. (2015) Design of prediction mathematical models for calculation of thermodynamic parameters of cast heat-resistant nickel alloys. Sovrem. elektrometall., 4, 31-37. https://doi.org/10.15407/sem2015.04.05
21. Gayduk S. V., Tikhomirova T. V. (2015) Primeneniye CALPHAD-metoda dlya rascheta kolichestva ??-fazy i prognozirovaniya dlitelnoy prochnosti liteynykh zharoprochnykh nikelevykh splavov. Metallurgicheskaya i gornorudnaya promyshlennost, 6, 64-68.
22. Gaiduk S.V., Kononov V.V., Kurenkova V.V. (2016) Regression models for prediction of corrosion parameters of casting heat-resistant nickel alloys. Sovrem. elektrometall., 3, 51-56. https://doi.org/10.15407/sem2016.03.08
23. Gayduk S. V., Tikhomirova T. V. (2015) Primeneniye analiticheskikh metodov dlya rascheta khimicheskogo sostava ?-, ??-faz i parametrov fazovoy stabilnosti liteynykh zharoprochnykh nikelevykh splavov. Aviatsionno-kosmicheskaya tekhnika i tekhnologiya, 9, 33-37.
24. Pasport na zharoprochny korrozionnostoyky nikelevy splav ZMI-3U (KhN64VMKYuT) / A. D. Koval i dr.- Zaporozhye, 1995.- 30 s.
25. Vertogradsky V. A., Rykova T. P. (1984) Issledovaniye fazovykh prevrashcheny v splavakh tipa ZhS metodom DTA. Zharoprochnye i zharostoykiye stali i splavy na nikelevoy osnove , , 223-227.
The cost of subscription/purchase order journals or individual articles
| Journal/Currency | Annual Set | 1 issue printed |
1 issue |
one article |
| AS/UAH | 1800 UAH | 300 UAH | 300 UAH | 150 UAH |
| AS/USD | 192 $ | 32 $ | 26 $ | 16 $ |
| AS/EUR | 180 € | 30 € | 25 € | 15 € |
| TPWJ/UAH | 7200 UAH | 600 UAH | 600 UAH | 280 UAH |
| TPWJ/USD | 384 $ | 32 $ | 26 $ | 16 $ |
| TPWJ/EUR | 360 € | 30 € | 25 € | 15 € |
| SEM/UAH | 1200 UAH | 300 UAH | 300 UAH | 150 UAH |
| SEM/USD | 128 $ | 32 $ | 26 $ | 16 $ |
| SEM/EUR | 120 € | 30 € | 25 € | 15 € |
| TDNK/UAH | 1200 UAH | 300 UAH | 300 UAH | 150 UAH |
| TDNK/USD | 128 $ | 32 $ | 26 $ | 16 $ |
| TDNK/EUR | 120 € | 30 € | 25 € | 15 € |
AS = «Automatic Welding» - 6 issues per year;
TPWJ = «PATON WELDING JOURNAL» - 12 issues per year;
SEM = «Electrometallurgy Today» - 4 issues per year;
TDNK = «Technical Diagnostics and Non-Destructive Testing» - 4 issues per year.