Позорная война рф против Украины

Начата 20 февраля 2014 и полномасштабно продолжена 24 февраля 2022 года. С первых же минут рф ведет ее с нарушением законов и правил войны, захватывает атомные станции, уничтожает бомбардировками мирное население и объекты критической инфраструктуры. Правители и армия рф - военные преступники. Все, кто платит им налоги или оказывают какую-либо поддержку - пособники терроризма. Народ Украины вас никогда не простит и ничего не забудет.

2017 №12 (03) DOI of Article
2017 №12 (05)

The Paton Welding Journal 2017 #12
TPWJ, 2017, #12, 23-28 pages
Application of explosion welding for manufacture of trimetallic transition pieces of cryomodules of linear collider

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                      0957-798X (print)
Issue                       #12, 2017 (December)
Pages                      23-28
A.G. Bryzgalin1, E.D. Pekar1, P.S. Shlensky1, G.D. Shirkov2, Yu.A. Budagov2 and B.M. Sabirov2
1E.O. Paton Electric Welding Institute of the NAS of Ukraine, 11 Kazimir Malevich Str., 03150, Kiev, Ukraine. E-mail: office@paton.kiev.ua
2JINR, 6 Joliot Curie Str., 141980, Dubna, RF. Е-mail: post@jinr.ru
An original design of transition piece for joining cryomodules of linear collider was proposed, providing necessary strength, helium and vacuum tightness at relatively low cost. The modes of explosion welding of plane titanium–stainless steel–titanium workpieces, at which intermetallics in the joining zone are almost absent, were developed. The modes of electron beam fillet welding of niobium branch pipe with titanium of a transition disc were selected experimentally. The experimental samples of transition pieces were manufactured which successfully passed tests on thermocycling and helium tightness. 8 Ref., 11 Figures.
Keywords: collider, explosion welding, helium tightness, transition piece, nuclear research
Received:                27.11.17
Published:               16.01.18
  1. International Linear Collider. (2013) Technical Design Report. linearcollider.org/ILC/Publications/Technical-Design-Report.
  2. Sabirov, B. (2010) Explosion welding: New design of the ILC cryomodule. JINR NEWS, 3, 16–20.
  3. Lysak, V.I., Kuzmin, S.V. (2005) Explosion welding. Moscow, Mashinostroenie [in Russian].
  4. Gurevich, S.M. (1981) Reference book on welding of nonferrous metals. Kiev, Naukova Dumka [in Russian].
  5. Ryabov, V.R., Dobrushin, L.D., Moon, J.G. (2003) Welding of bimetal. Ed. by Paton B.E. Kiev, PWI.
  6. Petushkov, V.G., Fadeenko, Yu.I. (1995) Explosion-thermal treatment of welded joints. Ed. by Paton B.E. Welding and Surfacing Review; Vol. 8, Pt 2. London, Harwood acad. publ.
  7. Petushkov, V.G., Simonov, V.F., Sedykh, V.S., Fadeenko, Yu.I. (1996) Explosion welding criteria. Ed. by Paton B.E. Ibid., Vol. 3, Pt 4. London, Harwood acad. publ.
  8. Petushkov, V.G. (2009) Explosion and its applications in metalworking. New York, Nova Science Publ.