The Paton Welding Journal, 2018, №12



2018 №12 (07)

DOI of Article 10.15407/tpwj2018.12.08

2018 №12 (09)

---

The Paton Welding Journal, 2018, #11-12, 77-82 pages
 

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                      0957-798X (print)
Issue                       #11-12, 2018 (November)
Pages                      77-82
 
 

Effect of plate thickness on weld speed in friction stir welding of AA6061-T6 Al-alloy plates

G. İpekoğlu¹, Ö. Akçam² and G. Çam¹

¹Iskenderun Technical University 31200 Iskenderun-Hatay, Turkey. E-mail: guven.ipekoglu@iste.edu.tr, gurel.cam@iste.edu.tr
²GSI SLV-TR Kaynak Teknolojisi Test ve Mesleki Gelişim Merkezi Ltd. Şti., Çiğdem Mah., Gökkuşağı Sitesi, Mavi Blok No:37-38, 06520 Balgat, Çankaya, Ankara, Turkey. E-mail: ozgur.akcam@gsi.com.tr

In this study, it was aimed to determine the weld speeds required in order to obtain defect-free joints in AA6061-T6 alloy plates with two different thicknesses (namely 3.0 and 6.2 mm) by friction stir welding at a constant rotational rate of 1000 rev. min^–1. For this purpose, two different stirring tools (one tool for each plate thickness) have been obtained and used to determine suitable weld speed for each plate thickness. The microstructures of the joints obtained were investigated in both macro- and micro-scale, and their mechanical properties were determined by conducting microhardness measurements and tensile testing. The current study clearly indicated that AA6061-T6 alloy plates with different thicknesses can be successfully FS welded provided that suitable stirring tool and weld parameters are used. Moreover, it was also observed that the joint performance value of the thicker plates was somewhat lower than that of the thinner plates. This can be attributed to higher heat inputs required in order to obtain defect-free joints in thicker plates and lower cooling rates after the joining in the case of thicker plates. 42 Ref., 2 Tables, 7 Figures.
Keywords: friction stir welding, AA6061-T6, plate thickness, microstructure, mechanical properties
 
Received:                05.09.18
Published:               23.11.18
 
 
References
1. Thomas, W.M., Nicholas, E.D., Needham, J.C., Murch, M.G., Temple-Smith, P., and Dawes, C.J., December 1991. International Patent Application No. PCT/GB92/02203
2. Mishra, R.S., and Ma, Z.Y. Materials Science and Engineering: R: Reports, 2005, 50, pp. 1-78. https://doi.org/10.1016/j.mser.2005.07.001
3. Nandan, R., DebRoy, T., and Bhadeshia, H.K.D.H. Progress in Materials Science, 2008, 53 (6):pp. 980-1023. https://doi.org/10.1016/j.pmatsci.2008.05.001
4. Çam, G. International Materials Reviews, 2011, 56, pp. 1-48. https://doi.org/10.1179/095066010X12777205875750
5. Çam, G., and Mıstıkoğlu, S. Journal of Materials Engineering and Performance, 2014, 23 (6), pp. 1936-1953. https://doi.org/10.1007/s11665-014-0968-x
6. Çam, G., and İpekoğlu, G. The International Journal of Advanced Manufacturing Technology, 2017, 91 (5-8), pp. 1851-1866. https://doi.org/10.1007/s00170-016-9861-0
7. Çam, G., İpekoğlu, G., Küçükömeroğlu, T., and Aktarer, S.M. Journal of Achievements in Materials and Manufacturing Engineering (JAMME), 2017, 80 (2), pp. 65-85. https://doi.org/10.5604/01.3001.0010.2027
8. Kashaev, N., Ventzke, V., and Çam, G. to be published in J. Manuf. Proc., 2018.
9. Çam, G., Mistikoglu, S., and Pakdil, M. Welding Journal, 2009, 88 (11), pp. 225s-232s.
10. Çam, G., Serindağ, H.T., Çakan, A., Mıstıkoğlu, S., and Yavuz, H. Materialwissenschaft und Werkstofftechnik, 2008, 39 (6), pp. 394-399. https://doi.org/10.1002/mawe.200800314
11. Küçükömeroğlu, T., Şentürk, E., Kara, L., İpekoğlu, G., and Çam, G. Journal of Materials Engineering and Performance (JMEPEG), 2016, 25 (1), pp. 320-326. https://doi.org/10.1007/s11665-015-1838-x
12. Yang, J., Xiao, B.L., Wang, D., and Ma, Z.Y. Materials Science and Engineering A, 2010, A527 (3), pp. 708-714. https://doi.org/10.1016/j.msea.2009.09.044
13. Zhang, D., Suzuki, M., and Maruyama, K. Scripta Materialia, 2005, 52 (9), pp. 899-903. https://doi.org/10.1016/j.scriptamat.2005.01.003
14. Lim, S.G., Kim, S.S., Lee, C.G., Yim C.D., and Kim, S.J. Metallurgical and Materials Transactions A, 2005, 36A (6), pp. 1609-1612. https://doi.org/10.1007/s11661-005-0252-7
15. Günen, A., Kanca, E., Demir, M., Çavdar, F., Mistikoğlu, S., and Çam, G. Indian Journal of Engineering & Materials Sciences, 2018, 25 (1), pp. 26-32.
16. Thomas, W.M., Threadgill, P.L., and Nicholas, E.D. Science and Technology of Welding and Joining, 1999, 4 (6), pp. 365-372. https://doi.org/10.1179/136217199101538012
17. Ueji, R., Fujii, H., Cui, L., Nishioka, A., Kunishige, K., and Nogi, K. Materials Science and Engineering A, 2006, A423, pp. 324-330. https://doi.org/10.1016/j.msea.2006.02.038
18. Miyazawa, T., İwamoto, Y., Maruko, T., and Fujii, H. Science and Technology of Welding and Joining, 2012, 17 (3), pp. 213-218. https://doi.org/10.1179/1362171811Y.0000000097
19. Küçükömeroğlu, T., Aktarer, S.M., İpekoğlu, G., and Çam, G. to be published in International Journal of Minerals, Metallurgy and Materials, 2018
20. Pakdil, M., Çam, G., Koçak, M., and Erim, S. Mater. Sci. Eng. A, 2011, 528 (24), pp. 7350-7356. https://doi.org/10.1016/j.msea.2011.06.010
21. Çam, G. and Koçak, M. J. Mater. Sci., 2007, 42 (17), pp. 7154-7161. https://doi.org/10.1007/s10853-007-1604-z
22. Çam, G., Ventzke, V., dos Santos, J.F., Koçak, M., Jennequin, G., and Gonthier-Maurin, P. Sci. Technol. Weld. Join., 1999, 4 (5), pp. 317-323. https://doi.org/10.1179/136217199101537941
23. Çam, G., Ventzke, V., dos Santos, J.F., Koçak, M., Jennequin, G., Gonthier-Maurin, P., Penasa, M., and Rivezla, C. Prakt. Metallogr., 1999, 36 (2), pp. 59-89.
24. Çam, G., Güçlüer, S., Çakan, A., and Serindağ, H.T. Mat.-wiss. u. Werkstofftech., 2009, 40 (8), pp. 638-642. https://doi.org/10.1002/mawe.200800455
25. Dos Santos, J., Çam, G., Torster, F., Insfran, A., Riekehr, S., Ventzke, V., and Koçak, M. Welding in the World, 2000, 44 (6), pp. 42-64.
26. Von Strombeck, A., Çam, G., Dos Santos, J.F., Ventzke, V., and Koçak, M. 'A comparison between microstructure, properties, and toughness behavior of power beam and friction stir welds in Al-alloys', Proc. of the TMS 2001 Annual Meeting Aluminum, Automotive and Joining (New Orleans, Louisiana, USA, February 12-14, 2001), eds: S.K. Das, J.G. Kaufman, and T.J. Lienert, pub.: TMS, Warrendale, PA, USA, 2001, pp. 249-264.
27. Trueba, L., Heredia, G., Rybicki, D., and Johannes L.B. Journal of Materials Processing Technology, 2015, 219, pp. 271-277. https://doi.org/10.1016/j.jmatprotec.2014.12.027
28. Cao, J.Y., Wang, M., Kong, L., Zhao, H.X., and Chai, P. Materials Characterization, 2017, 128, pp. 54-62. https://doi.org/10.1016/j.matchar.2017.03.023
29. Liu, H.J., Hou, J.C., Guo H. Materials & Design, 2013, 50, pp. 872-878. https://doi.org/10.1016/j.matdes.2013.03.105
30. Elangovan, K., and Balasubramanian, V. Materials Characterization, 2008, 59 (9), pp. 1168-1177. https://doi.org/10.1016/j.matchar.2007.09.006
31. Feng, A. H., Chen, D. L., and Ma, Z. Y. Metallurgical and Materials Transactions A, 2010, 41A, pp. 2626-2641. https://doi.org/10.1007/s11661-010-0279-2
32. İpekoğlu, G., Kıral, B. G., Erim, S., and Çam, G. Materiali in Tehnologije, 2012, 46 (6), pp. 627-632.
33. İpekoğlu, G., Erim, S., Kıral, B. G., and Çam, G. Kovove Materialy, 2013, 51 (3), pp. 155-163.
34. İpekoğlu, G., Erim, S., and Çam, G. Metallurgical and Materials Transactions A, 2014, 45A (2), pp. 864-877. https://doi.org/10.1007/s11661-013-2026-y
35. İpekoğlu, G., Erim, S., and Çam, G. The International Journal of Advanced Manufacturing Technology, 2014, 70 (1), pp. 201-213. https://doi.org/10.1007/s00170-013-5255-8
36. İpekoğlu, G., and Çam, G. Metallurgical and Materials Transactions A, 2014, 45A (7), pp. 3074-3087. https://doi.org/10.1007/s11661-014-2248-7
37. Çam, G., İpekoğlu, G., and Serindağ, H.T. Science and Technology of Welding and Joining, 2014, 19 (8), pp. 715-720. https://doi.org/10.1179/1362171814Y.0000000247
38. İpekoğlu, G., Akçam, Ö., and Çam, G. 'Effect of plate thickness on weld speed in friction stir welding of AA6061-T6 Al-alloys plates', Proc. of the 10th Welding Technology National Congress and Exhibition, 17-18 November 2017, Ankara, Turkey, pp. 63-75 (in Turkish).
39. Woo, W., Choo, H., Brown, D.W., and Feng, Z. Metallurgical and Materials Transactions A, 2007, 38A, pp. 69-76. https://doi.org/10.1007/s11661-006-9034-0
40. İpekoglu G., Akçam Ö., and Çam G. Afyon Kocatepe University Journal of Science and Engineering (AKU J. Sci. Eng.), 2018, 18 (1), 015901, pp. 324-335 (in Turkish)
41. Koçak, M., Pakdil, M., and Çam, G. Sci. Technol. Weld. Join., 2002, 7 (4), pp. 187-196. https://doi.org/10.1179/136217102225004220
42. Çam, G., Koçak, M., Dobi, D., Heikinheimo, L., and Siren, M. Science and Technology of Welding and Joining, 1997, 2 (3), pp. 95-101. https://doi.org/10.1179/stw.1997.2.3.95

---

Suggested Citation

G. İpekoğlu¹, Ö. Akçam² and G. Çam (2018) Effect of plate thickness on weld speed in friction stir welding of AA6061-T6 Al-alloy plates. The Paton Welding J., 12, 77-82.

---