The Paton Welding Journal, 2020, №05



2020 №05 (02)

DOI of Article 10.37434/tpwj2020.05.03

2020 №05 (04)

---

The Paton Welding Journal, 2020, #5, 15-23 pages
 

Problems and prospects of surfacing of copper and copper parts by wear-resistant layers (Review)

A.A. Babinets¹, I.O. Ryabtsev¹, I.P. Lentyugov¹, I.I. Ryabtsev¹, Yu.V. Demchenko¹ and A.I. Panfilov²

¹E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
²Steel Work Company 32 Sobornosti Str., 50065, Kryvyi Rih, Ukraine. E-mail: a.panfilov@steel-work.net

Abstract
The prospects for application of the methods of arc and plasma-powder surfacing, in order to increase the wear resistance of copper parts, are shown, proceeding from the results of literature analysis. Selection of promising materials was performed for deposition of copper-resistant layers on copper surfaces by these methods. Comparative evaluation of physico-mechanical properties of copper and the main alloying elements of promising surfacing materials was performed. 31 Ref., 1 Table, 6 Figures.
Keywords: surfacing of copper, wear-resistant layer, increase of wear resistance, copper, dissimilar metals, weldability, fusion zone

Received 17.03.2020

References

1. Mvola, B., Kah, P., Martikainen, J. (2014) Welding of dissimilar non-ferrous metals by GMAW processes. Inter. J. of Mechanical and Materials Eng., 9, 21. https://doi.org/10.1186/s40712-014-0021-8
2. Gurevich, S.M. (1990) Non-ferrous metal welding guide. Kiev, Naukova dumka, [in Russian].
3. Bailey, N. (1986) Welding dissimilar metals. Cambridge, Woodhead Publ. Ltd.
4. Neulybin, S.D., Belinin, D.S., Kuchev, P.S., Gilev, I.A. (2013) Research plasma surfacing of copper by working of plasma torch on direct and reverse polarity current. Master's J., 2, 22-27.
5. Radyuk, A.G., Titlyanov, A.E., Strizhakova, T.I. et al. (2008) The influence of aluminum on the nickel and chromium diffusion into copper during the deposition and thermal treatment of gas-thermal coatings. Russian Journal of Non-ferrous Metals, 49, 261-263. https://doi.org/10.3103/S1067821208040093
6. Neulybin, S.D., Belinin, D.S., Terentyev, S.A. (2017) Comparative analysis of wear and corrosion attack resistance of bimetal steel-copper products manufactured by plasma-jet hard-facing with direct and reversed polarity current. Procedia Eng., 206, 1401-1406. https://doi.org/10.1016/j.proeng.2017.10.652
7. Messler, R.W. (2019) A Practical guide to welding solutions: overcoming technical and material-specific issues. Wiley-VCH Verlag GmbH & Co. KGaA. https://doi.org/10.1002/9783527818815
8. Akimov, V.A. (2011) Research and improvement of the technology for manufacturing air lances of blast furnaces by applying aluminum-containing gas-flame coatings with subsequent heat treatment. Cand. tech. sci. diss. abstr. Moscow, Institut stali i splavov [in Russian].
9. Paton, B.E. (1974) Technology of the Fusion Electric Welding of Metals and Alloys. Moscow, Mashinostroenie, [in Russian].
10. Rjabcev, I.A., Senchenkov, I.K., Turyk, Je.V. (2015) Surfacing. Materials, technologies, mathematical modeling. Gliwice, Wydawnictwo Politechniki Slaskiej [in Russian]. https://doi.org/10.15407/tpwj2015.06.29
11. Gerasimova, A., Devyatyarova, V., Kondratenko, V. (2017) Creation of the wear-resistant layer on narrow walls MNLZ crystallizers with use gas-thermal covering. Bulletin of Sci. and Practice, 1, 32-38.
12. Demidenko, L.Yu., Onatskaya, N.A., Polovinka, V.D. (2014) Effect of temperature of thermomechanical treatment on quality of dissimilar metal joints. The Paton Welding J., 12, 11-14. https://doi.org/10.15407/tpwj2014.12.03
13. Poleshchuk, M.A., Atroshenko, M.G., Shevtsov, A.V., Puzrin, A.L. (2016) Deposition of protective coatings on copper plates of CCM molds by the method of autovacuum brazing. Ibid, 10, 37-40. https://doi.org/10.15407/tpwj2016.10.07
14. Koleda, V.N. (2012) Improvement of the technology for submergedarc welding of copper to steel. Ibid, 3, 39-43.
15. Wan, X., Liu, X.W., Zhang, M.Y. (2007) Experimental research on ZrO2 coating for single tuyere of small blast furnace. Refractories, 41, 220-222, 229.
16. Shmorgun, V.G., Slautin, O.V., Evstropov, D.A. et al. (2015) Methods for producing wear-resistant coatings based on titanium cuprides. Izvestija VGTU, 12, 22-28, [in Russian].
17. Portnov, L., Nikitin, L., Bugaev, S., Shchipitsyn, V. (2014). Improving the durability of blast-furnace tuyeres. Metallurgist, 58, 488-491. https://doi.org/10.1007/s11015-014-9938-7
18. Senchenkov, I.K., Chervinko, O.P., Ryabtsev, I.A., Babinets, A.A. (2014) Determination of the service life of hardfaced components under thermal and cyclic loading. Welding International, v. 28, 1, 80-84. https://doi.org/10.1080/09507116.2013.796661
19. Babinets, A.A., Ryabtsev, A.A. (2016) Fatigue life of multilayer hard-faced specimens. Ibid, v. 30, 4, 305-309. https://doi.org/10.1080/01431161.2015.1058004
20. Ilyushenko, V.M., Anoshin, V.A., Majdanchuk, T.B., Lukianchenko, E.P. (2014) Effectiveness of application of new consumables in welding and surfacing of copper and its alloys (Review). The Paton Welding J., 6-7, 80-83. https://doi.org/10.15407/tpwj2014.06.16
21. Psaras, G.G., Ezhel', A.I. (1985) For Welder of Non-Ferrous Metals. Reference Book. Donetsk, Donbass, [in Russian].
22. Nevidomsky, V.A., Krasilnikov, S.G., Panin, A.D., et al. (2003) Experience in welding of copper-steel moulds at NKMZ Company. The Paton Welding J., 8, 46-48.
23. Babinets, A.A., Ryabtsev, I.A., Panfilov, A.I., Zhdanov, V.A. (2016) Influence of methods of arc surfacing with flux-cored wire on penetration of base metal and formation of deposited metal. Ibid, 11, 17-22. https://doi.org/10.15407/tpwj2016.11.03
24. Babinets, A.A., Ryabtsev, I.A. (2017) Flux-cored wire for wear-resistant surfacing of thin-sheet structures. Ibid, 1, 54-57. https://doi.org/10.15407/tpwj2017.01.10
25. Pereplyotchikov, E.F. (2004) Plasma-powder cladding of wear- and corrosion-resistant alloys in valve manufacturing. Ibid, 10, 31-37.
26. Pereplyotchikov, E.F. (2015) Plasma-powder surfacing of nickel and cobalt alloys on copper and its alloys. Ibid, 5-6, 10-13. https://doi.org/10.15407/tpwj2015.06.02
27. Beljuk, S.I., Samarcev, V.P., Pay, A.G., Gal'chenko N.K. (2006) Electron beam surfacing in the steel industry. Proceedings II int. seminar «Plasma emission electronics». Respublika Burjatija, Ulan-Udje, 101-107, [in Russian].
28. Grigorenko, G.M., Adeeva, L.I., Tunik, A.Yu., et al. (2015) Application of friction stir welding method for repair and restoration of worn-out copper plates of mccb moulds. The Paton Welding J., 5-6, 55-58. https://doi.org/10.15407/tpwj2015.06.13
29. Massalski, T. B. (2007) Binary alloy phase diagrams. Materials Park, Ohio, ASM Inter.
30. Chigarev, V.V., Gavrish, P.A., Vasil'eva, L.V. (2011) Increase of the productivity of welding of cooper with steel. Eastern-European Journal of Enterprise Technologies, 4/5, 4-7.
31. Lide, D. R., Haynes, W. (2018) CRC Handbook of chemistry and physics: a ready-reference book of chemical and physical data. Boca Raton, Taylor and Francis.

---

Suggested Citation

A.A. Babinets, I.O. Ryabtsev, I.P. Lentyugov, I.I. Ryabtsev, Yu.V. Demchenko and A.I. Panfilov (2020) Problems and prospects of surfacing of copper and copper parts by wear-resistant layers (Review). The Paton Welding J., 05, 15-23.

---