The Paton Welding Journal, 2004, №10

2004 №10 (01)

2004 №10 (03)

---

The Paton Welding Journal, 2004, #10, 8-11 pages

Behavior of particles of a non-compact filler at air-slag interface in electroslag hardfacing

O.G. Kuzmenko

E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
Data are given on behavior of particles of non-compact materials (chips and shot) on the surface of the pool in electroslag surfacing. Conditions have been determined for fixation of these particles at the air-slag interface. It is shown that shot of chromium cast iron with a diameter of up to 2.3 mm and chips of tool steel 5KhNM up to 2.7 mm thick (fixation by the largest side) or up to 0.6 mm thick (fixation by the smallest side) may float on the surface of the slag pool.
Keywords: electroslag hardfacing, nоn-compact Hint ends, slag pool, metal pool, interface

References

1. Medovar, B.I., Tsykulenko, A.K., Shevtsov, V.L. et al. (1986) Metallurgy of electroslag process. Kiev: Naukova Dumka.
2. Kuskov, Yu.M., Ksyondzyk, G.V. (1982) Application of granular filler material in electroslag hardfacing. In: Current methods of hardfacing and their application. Kiev: PWI.
3. Lyuty, I.V., Latash, Yu.V. (1982) Electroslag melting and refining of metals. Kiev: Naukova Dumka.
4. Nosatov, V.A., Kuzmenko, O.G., Ovchinnikova, T.Kh. (1987) Production of bimetallic billets by electroslag heating of chip by remelting. In: Theory and practice of production of bimetallic and multilayer castings. Kiev: IPL.
5. Kuzmenko, O.G., Nosatov, V.A. (1996) Manufacture of tool and fixture of higher performance by electroslag hardfacing using the waste of tool manufacturing. In: Metal-working: Current tools and tool material. Kiev: Znanie.
6. Ksyondzyk, G.V. (1990) Electroslag hardfacing using granular filler material. Svarochn. Proizvodstvo, 11, 2-3.
7. Demchenko, V.F., Tsykulenko, A.K., Baryshev, A.I. et al. (1984) Numerical modeling of movement and heating of macrocoolers in slag pool. Avtomatich. Svarka, 9, 24-28.
8. Poggi, D., Minto, R., Davenport, W.G. (1969) Mechanisms of metal entrapment in slags. J. Metals, 21(11), 40-45.
9. Vanyukov, A.V., Zajtsev, V.Ya. (1969) Slags and mattes of non-ferrous metallurgy. Moscow: Metallurgiya.
10. Bakst, V.Ya., Medzhibodzhsky, M.Ya., Tarasyuk, L.I. et al. (1984) Conditions of floating of metal bodies in melts. Izvestiya Vuzov. Chyorn. Metallurgiya, 3, 33-37.
11. Adam, N.K. (1947) Physics and chemistry of surfaces. Moscow-Leningrad: Gostekhizdat.
12. Popel, S.I. (1994) Surface phenomena in melts. Moscow: Metallurgiya.
13. Zimon, A.D. (1974) Adhesion of liquid and wetting. Moscow: Khimiya.
14. Ivashchenko, Yu.M., Eremenko, V.N. (1972) Principles of precision measurement of surface energy of melts by sessile drop metal method. Kyiv: Naukova Dumka.
15. Tovbin, M.V., Chesha, I.I., Dukhin. S.S. (1970) Examination of properties of surface layer of liquids by floating drop metal method. Kolloidn. Zhurnal, 32(a), 771-777.
16. Larikov, L.N., Yurchenko, Yu.F. (1985) Structure and properties of metals and alloys. Thermal properties of metals and alloys. Refer. Book. Kiev: Naukova Efumka.
17. Kuskov, Yu.M. (1979) Study and development of cladding materials and technology of electroslag cladding of hot mill rolls. Syn. of Thesis for Cand. of Techn. Sci. Degree. Kiev.
18. Goloshubov, V.L, Slivinsky, A.M., Kopersak, N.I. et al. (1972) Viscosity and surface tension of some welding slags. Avtomatich. Svarka, 2, 73.
19. Kunilovskv, V.V., Krutikov, V.K. (1987) Cast dies for hot volume reduction. Leningrad: Mashinostroenie.
20. Akberdin, A.A., Kulikov, I.S., Kim, V.A. et al. (1987) Physical properties of melts of system CaO-SiO2-Al2O3-MgO-CF2. Refer. Book. Moscow: Metallurgiya

---

Suggested Citation

O.G. Kuzmenko (2004) Behavior of particles of a non-compact filler at air-slag interface in electroslag hardfacing. The Paton Welding J., 10, 8-11.

---