The Paton Welding Journal, 2005, №01

2005 №01 (01)

2005 №01 (03)

---

The Paton Welding Journal, 2005, #1, 5-9 pages

Analysis of modern views on weldability

K.A. Yushchenko, V.V. Derlomenko

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
Analysed are some international and national standards, as well as publications on definition and evaluation of weldability. The analysis conducted is summarised and key points are highlighted by an example of standards ISO 581-1980 and DSTU 3761.1–98. It is shown that the existing views on weldability (joinability) of materials do not correspond to modern approaches to making permanent joints and require revision.
Keywords: arc welding, weldability, standards, evaluation of weldbality, Joinability, hard-to-weld materials, welding technology, service conditions

References

1. Yushchenko, K.A. (2004) Weldability and advanced processes for materials welding. The Paton Welding J., 9, 39–44.
2. Hrivnak, I. (1984) Weldability of steels. Ed. by E.L. Makarov. Moscow: Mashinostroenie.
3. Hrivnak, I., Makhnenko, V.I. (1983) Application of computational methods for investigation of steel weldability. In: Call. pap. of 2nd Symp. of CMEA on Application of Mathematical Methods for Investigation of Weldability, Sozopol, Bulgaria, Oct. 3–5, 1983. Sofia: V.I. Lenin VMEI.
4. (1976) Weldability of semi-killed steels. Ed. by A.E. Asnis. Kiev: PWI.
5. Shkriniar, Ya.Yu. (1970) Problems of weldability of steels produced by current methods. In: Call. pap. of Int. Symp. devoted to 100th Anniversary of E.O. Paton on Scientific Problems of Welding and Special Electrometallurgy. Part 1: Problems of weldability and technology of welding of metals. Kiev: Naukova Dumka.
6. Lashko, N.F., Lashko, S.V. (1963) Some problems of weldability of metals. Moscow: Mashgiz.
7. Modzhun, M., Zhiznyakov, S. (1991) Weldability of lowalloy high-strength steels. In: Proc. of Seminar on Metallurgical Requirements of Manufacturers and Consumers to Weldability of Steel Structure, Kiev, Sept. 16–20, 1991. Kiev: PWI.
8. Shorshorov, M.Kh., Chernyshova, T.A., Krasovsky, A.I. (1972) Weldability tests of metals. Moscow: Metallurgiya.
9. Shorshorov, M.Kh. (1960) Weldability of metals. Moscow: Profizdat.
10. Verkhovenko, L.B., Tukin, A.K. (1977) Reference book of a welder. Minsk: Vyshejshaya Shkola.
11. Livshits, L.S., Khakimov, A.N. (1989) Metals science in welding and heat treatment of welded joints. Moscow: Mashinostroenie.
12. Makarov, E.L. (1981) Cold cracks in welding of alloyed steels. Moscow: Mashinostroenie.
13. Shorshorov, M.Kh. (1965) Metals science in welding of steel and titanium alloys. Moscow: Nauka.
14. (1976) Reference book of a metal-worker. Ed. by A.G. Rakhshtadt, V.A. Brostrem. Moscow: Mashinostroenie.
15. Quian, M., Lippold, J.C. (2002) The effect of multiple postweld heat treatment cycles on the weldability of Wespalloy. Welding J., 11, 233–238.
16. Feng, Z., Zacharia, T., David, S.A. (1997) Thermal stress development in a nickel based superalloy during weldability test. Ibid., 11, 470–482.
17. (1985) Weldability and technology of welding of structural steels and cast irons. Ed. by A.E. Asnis. Kiev: PWI.
18. Musiyachenko, V.F., Mikhoduj, L.I. (1987) Arc welding of high-strength alloyed steels . Moscow: Mashinostroenie.
19. Frantov, I., Kireeva, T., Nazarov, A. (1991) Complex simulation method for investigation of steel weldability and evaluation of HAZ properties. In: Proc. of Seminar on Metallurgical Requirements of Manufacturers and Consumers to Weldability of Steel Structure, Kiev, Sept. 16–20, 1991. Kiev: PWI.
20. Yushchenko, K., Solokha, A., Kazennov, N. (1991) Highalloy stainless steels of ferritic class: weldability problems. Ibid.
21. Nakamura, H., Naiki, T., Okabayashi, H. (1969) Stress re¬lief cracking in the HAZ. IIW Doc. IX-648–69 (X-531–69).
22. Krasovsky, A.I. (1959) Methods for testing structural steel to weldability used in the USSR and abroad. Moscow: VI-NITI SSSR.
23. Musiyachenko, V.F. (1983) Weldability and technology of welding of high-strength steels. Kiev: Naukova Dumka.
24. Dumov, S.I. (1987) Technology of electric fusion welding. Leningrad: Mashinostroenie.
25. Hrivnak, I., Pilarczyk, J. (1983) Application of mathematical methods for investigation of cracking of welded joints. In: Call. pap. of 2nd Symp. of CMEA on Application of Mathematical Methods for Investigation of Weldability, Sozopol, Bulgaria, Oct. 3–5, 1983. Sofia: V.I. Lenin VMEI.
26. Mikula, J. (2001) Analytyczne metody oceny spawalnosci stali. Krakow: Politechnika Krakowska.
27. Musiyachenko, V.F., Zhdanov, S.L. (1987) Structure, mechanical properties and delayed fracture resistance of welded joints of high-strength steel VS-4. Avtomatich. Svarka, 12, 8–11.

---

Suggested Citation

K.A. Yushchenko, V.V. Derlomenko (2005) >Analysis of modern views on weldability. The Paton Welding J., 01, 5-9.

---