The Paton Welding Journal, 2006, №10

2006 №10 (05)

2006 №10 (07)

---

The Paton Welding Journal, 2006, #10, 29-35 pages

External electromagnetic effects in the processes of arc welding and surfacing (Review)

R.N. Ryzhov, V.D. Kuznetsov

NTUU «Kiev Polytechnic Institute», Kiev, Ukraine

Abstract
Classification of controlling magnetic fields used for implementation of electromagnetic effects is given. Published data on the efficiency of application of different electromagnetic effects in arc welding and surfacing processes are systematized and generalized. It is established that the spectrum of addressed technological problems is related to vector, amplitude and frequency characteristics of the controlling magnetic fields. The most promising ways of improving these technologies are identified
Keywords: arc welding and surfacing, electromagnetic effects, controlling magnetic fields, solidification, formation and parameters of quality of welds

References

1. Luo, J., Luo, Q., Lin, Y.H. et al. (2003) A new approach for fluid flow model in gas tungsten arc weld pool using longitudinal electromagnetic control. Welding J., 82(8), 202–206.
2. Shelenkov, G.M., Chernysh, V.P., Gurevich, S.M. et al. (1977) Peculiarities of weld formation in arc welding of titanium with electromagnetic stirring. Svarochn. Proizvodstvo, 3, 24–25.
3. Abralov, M.A., Abdurakhmanov, R.U., Yuldashev, A.T. (1977) Electromagnetic action on properties and structure of 01420 alloy welded Joints. Avtomatich. Svarka, 5, 21–24.
4. Abralov, M.A., Abdurakhmanov, R.U. (1980) Some peculiarities of formation of weld secondary boundaries in electromagnetic action. Ibid., 2, 12–14.
5. Abralov, M.A., Abdurakhmanov, R.U. (1982) On mechanism of refining of weld primary structure in electromagnetic action. Ibid., 2, 18–21.
6. Yakushin, B.F., Misyurov, A.I. (1979) Increase of technological strength in welding of medium alloy steel with electromagnetic action. Svarochn. Proizvodstvo, 12, 7–9.
7. Boldyrev, A.M., Dorofeev, E.B., Antonov, E.G. et al. (1974) External magnetic field action on crystallization and technological strength in argon-arc welding of magnesium alloys. Ibid., 9, 14–16.
8. Igumnov, V.P., Maltsev, S.N., Konkov, Yu.D. et al. (1983) Consumable electrode gas-shielded welding with electromagnetic stirring. Avtomatich. Svarka, 3, 41–42, 59.
9. Bardokin, E.V., Livenets, V.I., Okishor, V.A. et al. (1975) Structure and properties of weld metal in welding under low-frequency longitudinal alternating magnetic field. Svarochn. ProizvodStvo, 11, 12–14.
10. Ryzhov, R.N., Maksimov, S.Yu., Prilipko, E.A. et al. (2005) Influence of external electromagnetic actions on the structure and composition of welds in wet underwater welding. The Paton Welding J., 11, 34–35.
11. Chernysh, V.P., Pakharenko, V.A., Kuznetsov, V.D. (1980) Influence of electromagnetic stirring condition on chemical microheterogeneity of welds. Avtomatich. Svarka, 1, 76–77.
12. Briskman, A.N., Gladyshko, V.S., Kuznetsov, V.D. et al. (1973) Automatic welding of products of large thick steel Kh17N13M3T with electromagnetic stirring of molten pool. Khimich. i Neft. Mashinostroenie, 9, 25–26.
13. Chayun, A.G., Syrovatka, V.V., Matyash, V.I. (1981) Arc welding of aluminium alloy 01420 with electromagnetic stirring. Avtomatich. Svarka, 6, 19–21.
14. Ryzhov, R.N., Kozhukhar, V.A., Maksimov, S.Yu. et al. (2004) Application of external electromagnetic actions for improvement of mechanical properties of welds in underwater wet welding. The Paton Welding J., 11, 49–51.
15. Ryzhov, R.N., Skachkov, I.O., Chernysh, V.P. (1997) Increase of resistance of welds to hot cracking in manual consumable electrode arc welding. Avtomatich. Svarka, 4, 25–29.
16. Czernyzh, W., Ryzhov, R., Tyrec, E. (2004) Influence of electromagnetic effect in welding on the increase in resistance to hot cracking. Welding Int., 18, 257–262.
17. Boldyrev, A.M., Birzhev, V.A., Muraviev, R.V. et al. (2001) Influence of external magnetic field on weld tightness in welding of OT4-1 alloy. In: Abstr. of Conf. on Welding and Control (2001). Voronezh: VGASU.
18. Maksimov, S.Yu., Prilipko, E.A., Ryzhov, R.N. et al. (2003) Effect of external electromagnetic action on hydrogen content in weld metal in wet underwater welding. The Paton Welding J., 6, 41–43.
19. Zavialov, V.E., Zvorono, Ya.P., Petrakov, A.B. (1990) Application of longitudinal magnetic field in submerged-arc surfacing. Svarochn. Proizvodstvo, 2, 3–5.
20. Chernysh, V.P., Matyash, V.I. (1990) Prevention of disturbances of weld formation in increased welding speed and variable gap. Avtomatich. Svarka, 9, 9–11.
21. Boldyrev, A.M., Birzhev, V.A., Pomerantsev, A.S. (2004) About possibility of process control during arc welding and surfacing in axial magnetic field. In: Abstr. of Conf. on Welding and Control (2004), Vol. 2. Perm: PGTU.
22. Shaferovsky, V.A. (1996) Influence of axial magnetic field on arc penetrability in welding of steel plate with mode programming. Avtomatich. Svarka, 8, 20–24.
23. Manabe, Y., Zenitani, S., Hiromoto, Y. et al. Basic concept and viability of electromagnetically controlled molten pool welding process. IIW Doc. XI, XII.
24. Boldyrev, A.M., Birzhev, V.A., Chernykh, A.V. (1991) Peculiarities of electrode metal melting in welding with external longi¬tudinal magnetic field. Svarochn. Proizvodstvo, 5, 28–30.
25. Boldyrev, A.M., Birzhev, V.A., Chernykh, A.V. (2001) Melting of electrode wire in welding with axial alternating magnetic field of 50 Hz commercial frequency. In: Abstr. of Conf, on Welding and Control (2001). Voronezh: VGASU.
26. Malinkin, I.V., Popovsky, V.Yu., Syrovatka, V.V. et al. (1971) Maintaining of penetration deep in electromagnetic stirring conditions of weld pool. Avtomatich. Svarka, 8, 46–48.
27. Boldyrev, A.M., Birzhev, V.A., Chernykh, A.V. (1993) Control of deep penetration in arc welding and surfacing with longitudinal alternating magnetic field. Svarochn. Proizvodstvo, 6, 30–31.
28. Tarasov, N.M., Kapustin, S.S. (1982) Application of highfrequency electromagnetic field for dosed electrode metal drop transfer. Avtomatich. Svarka, 8, 10–12.
29. Tarasov, N.M. (1984) Energy calculation of process of electrode metal droplet detachment under action of external magnetic field pulse. Ibid., 6, 21–25.
30. Zavialov, V.E., Ivantsov, V.Ya., Skornyakov, V.Ya. et al. (1979) Argon-arc welding of stainless steels using the magnetic fields. Svarochn. Proizvodstvo, 12, 19–20.
31. Ryzhov, R.N., Semenyuk, V.S., Titov, A.A. (2004) Peculiarities of formation and crystallization of welds in TIG welding with magnetic arc deflection. The Paton Welding J., 4, 14–17.
32. Kovalev, I.M., Rybakov, A.S., Isakov, A.S. et al. (1977) Arc welding of cable sheathes in transverse magnetic field. Svarochn. Proizvodstvo, 11, 37–38.
33. Kovalyov, I.M., Krichevsky, E.M., Lvov, V.N. (1975) Consumable electrode argon-arc welding of 1Kh18N10T steel pipes with weld formation in transverse magnetic field. Ibid., 5, 15–17.
34. Kang, Y.H., Na, S.A. (2003) Characteristics of welding and arc signal in narrow groove gas metal arc welding using electromagnetic arc oscillation. Welding J., 3, 93–99.
35. Razmyshlyaev, A.D., Maevsky, V.R. (1996) Effect of controlling magnetic fields on weld geometrical sizes in submerged-arc welding. Svarochn. Proizvodstvo, 2, 17–19.
36. Kornienko, A.N. (1964) Magnetic control of submerged-arc strip electrode surfacing process. Ibid., 4, 12–14.
37. Eihhorn, F., Dilthey, U., Huwer, W. (1972) Unterpulver – Auftragschweissen mit 60-90 und 120 mm breiten Cr-Ni - Stahlbandelektroden. Industrie: Anzeiger, 98, 2369–2372.
38. Akulov, A.I., Rybachuk, A.M., Chernyshev, G.G. (1979) Peculuarities of weld formation in welding with transverse magnetic field. Svarochn. Proizvodstvo, 7, 11–14.
39. Rybachuk, A.M., Chernyshev, G.G. (1982) Influence of electrode immersion value on weld shape during welding in four-pole magnetic field. Ibid., 2, 25–26.
40. Brodyagina, I.V., Chernyshov, G.G. (1998) Arc welding of aluminium alloys with electromagnetic fields. Ibid., 9, 48–51.
41. Pakharenko, V.A. (1982) Calculation of optimal parameters of magnetic field in argon-arc welding with stirring of molten pool. Avtomatich. Svarka, 7, 39–41.
42. Ryzhov, R.N., Kuznetsov, V.D. (2005) Choice of optimal parameters of external electromagnetic action in arc methods of welding. The Paton Welding J., 6, 24–27.
43. Ryzhov, R.N., Kuznetsov, V.D., Prilipko, E.A. (2005) Procedure of calculation of controlling electromagnetic action parameters in arc welding of structural steels. Vestnik NTUU KPI, 45, 166–167.
44. Chernysh, V.P., Kukhar, S.N. (1984) Equipment for welding with electromagnetic stirring. Kiev: Vyshcha Shkola.
45. Razmyshlyaev, A.D. (1996) Influence of magnetic field on penetration sizes in submerged-arc surfacing. Avtomatich. Svarka, 8, 25–27, 30.
46. Ryzhov, R.N., Kuznetsov, V.D., Malyshev, A.V. (2004) Application of six-pole electromagnetic system for control of weld formation parameters in non-consumable electrode welding. The Paton Welding J., 2, 41–44.
47. Ryzhov, R.N. (2005) Application of combined electromagnetic actions for improving the quality of welds in welding with non-consumable electrode. Ibid., 7, 52–53.
48. Ryzhov, R.M. (2005) Principles of volume control of weldool solution hydrodynamics. Naukovi Visti NTUU KPI, 4, 3–87.

---

Suggested Citation

R.N. Ryzhov, V.D. Kuznetsov (2006) External electromagnetic effects in the processes of arc welding, surfacing (Review) ... 29. The Paton Welding J., 10, 29-35.

---