The Paton Welding Journal, 2008, №02

2008 №02 (09)

2008 №02 (02)

---

The Paton Welding Journal, 2008, #2, 2-5 pages

Analysis of risk of hot crack formation in braze-welded titanium-aluminium joints on basis of mathematical modeling

V.I. Makhnenko, A.S. Milenin

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
On basis of the results of mathematical modeling of heat deformation processes in laser braze-welding of titanium-aluminium joints, analysis of risk of hot crack formation in aluminium part of permanent joints has been carried out.
Keywords: mathematical modeling, braze-welding, titanium, aluminium, heat deformation, risk of hot crack formation

References

1. Wagner, F., Zerner, I., Kreimeyer, M. et al. (2001) Characterization and properties of dissimilar metal combinations of Fe/Al-sheet materials. In: Proc. of ICALEO (Orlando, Florida, USA, Sept. 2001), 365–374.
2. Darwish, S.M. (2004) Analysis of weld-binded dissimilar materials. Int. J. of Adhesion & Adhesives, 24, 347–354.
3. Mishra, R.S., Ma, Z.Y. (2005) Friction stir welding and processing. Mater. Sci. and Eng., 50, 1–78.
4. Sepold, G., Grupp, M. (2001) Laser materials processing – Quo Vadis? Laser Assisted Net Shape Eng., 3, 133–134.
5. Kreimer, M., Vollertsen, F. (2005) Processing titanium–aluminum hybrid joints for aircraft applications. In: Proc. of 3rd Int. WLT-Conf. on Lasers in Manufacturing (Munikh, June, 2005), 238–243.
6. Makhnenko, V.I., Milenin, A.S., Semyonov, A.P. (2007) Mathematical modeling of thermal-deformation processes in braze-welding of butt joints of the titanium–aluminium type. The Paton Welding J., 11, 2–5.
7. Ryabov, V.R. (1983) Welding of aluminium and its alloys with other metals. Kiev: Naukova Dumka.
8. Sabokar, V.K., Zamkov, V.N., Kireev, L.S. (1998) Specifics of argon-arc and diffusion welding of titanium with aluminium. Avtomatich. Svarka, 1, 14–17.
9. Cicala, E., Duffet, G., Andrzejewski, H. et al. (2005) Hot cracking in Al–Mg–Si alloy laser welding – operating parameters and their effects. Mat. Sci. and Eng. A, 395, 1–9.
10. Prokhorov, N.N. (1976) Physical processes in metals during welding. Vol. 2, Moscow: Metallurgiya.
11. Makhnenko, V.I., Velikoivanenko, E.A., Pochinok, V.E. et al. (1999) Numerical methods of the predictions of welding stresses and distortions. In: Welding and Surfacing Rev., Vol. 13, Part 1. Amsterdam: Harwood AP.
12. Makhnenko, V.I., Pochinok, V.E. (2006) Strength calculation of welded joints with crack-like imperfections. Kiev: PWI.
13. Boyer, R., Welsch, G., Collings, E.W. (1994) Materials properties handbook. Titanium alloys. Miami: ASM Int.

---

Suggested Citation

V.I. Makhnenko, A.S. Milenin (2008) Analysis of risk of hot crack formation in braze-welded titanium-aluminium joints on basis of mathematical modeling. The Paton Welding J., 02, 2-5.

---