| 2008 №03 (03) | 2008 №03 (05) |
The Paton Welding Journal, 2008, #3, 17-21 pages
Selection of filler metals for brazing thin-walled heat exchanging devices
V.F. Khorunov, S.V. Maksymova
E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.Abstract
Peculiarities of structure of seams in thin-sheet stainless steel joints produced by vacuum brazing using copper and nickel alloys as brazing filler metals are considered. Results of metallographic examinations and mechanical tests of the brazed joints are presented. Good prospects for utilisation of brazing filler metals based on the Ni–Mn system are demonstrated for brazing thin-walled structures, in particular, plate-ribbed heat exchangers.
Keywords: vacuum brazing, heat exchanging device, stainless steel, microstructure, brazing filler metal, brazed seam, boron, strength
References
1. Khimushin, F.F. (1967) Stainless steels. Moscow: Metallurgiya. 2. (2006) Machine-building: Encyclop. Ed. by B.E. Paton. Vol. III-4: Technology of welding, brazing and cutting. Moscow: Mashinostroenie.3. (1997) Constitutional diagrams of binary metallic system: Refer. Book. Vol. 2. Moscow: Mashinostroenie.
4. Lugscheider, E., Partz, K. (1983) High temperature brazing of stainless steel with nickel-base filler metals BNi2, BNi5 and BNi7. Welding J., 62(6) 160–164.
5. Lamb, S., Miller, F. (1969) The effects of aggression by nickel-base filler metals. Ibid., 48(7), 283–289.
6. Rabinkin, A., Wenski, E., Ribaudo, A. (1998) Brazing stainless steel using a new NBF-series of Ni–Cr–B–Si amorphous brazing foils. Ibid., 2, 66–75.
7. Khorunov, V.F., Maksymova, S.V. (2006) Vacuum brazing of thin-sheet metals. In: Proc. of 7th Int. Conf. on Vacuum Nanotechnologies and Equipment (Kharkov, Oct. 2–6, 2006). Vol. 1. Kharkov: NNTs KhFTI, 62–65.
Suggested Citation
V.F. Khorunov, S.V. Maksymova (2008) Selection of filler metals for brazing thin-walled heat exchanging devices. The Paton Welding J., 03, 17-21.The cost of subscription/purchase order journals or individual articles
| Journal/Currency | Annual Set | 1 issue printed |
1 issue |
one article |
| TPWJ/USD | 384 $ | 32 $ | 28 $ | 28 $ |
| TPWJ/EUR | 348 € | 29 € | 24 € | 24 € |
| TPWJ/UAH | 7200 UAH | 600 UAH | 600 UAH | 600 UAH |
| TDNK/UAH | 1680 UAH | 420 UAH | free access | free access |
| TDNK/USD | 128 $ | 32 $ | free access | free access |
| TDNK/EUR | 116 € | 29 € | free access | free access |
TPWJ = «PATON WELDING JOURNAL» - 12 issues per year;
SEM = «Electrometallurgy Today» - 4 issues per year;
AS = «Automatic Welding» - 6 issues per year, operates under a diamond open access model, providing free and unrestricted access;
TDNK = «Technical Diagnostics and Non-Destructive Testing» - 4 issues per year, operates under a diamond open access model, providing free and unrestricted access.