The Paton Welding Journal, 2009, №02



2009 №02 (09)

2009 №02 (11)

---

TPWJ, 2009, #2, 35-36 pages

DEVICE FOR IGNITING ARC OF DOUBLE-ANODE PLASMATRON

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 2, 2009 (February)
Pages                      35-36
 
 
Authors
N.A. MAKARENKO¹, V.V. CHIGAREV², N.A. GRANOVSKY², A.A. BOGUTSKY¹ and A.M. KUSHCHY^1
1Donbass State Machine Building Academy, Kramatorsk, Ukraine
²Priazovsky State Technical University, Mariupol, Ukraine
 
 
Abstract
The device is suggested that contains energy storage capacitors of increased capacity, a thyristor key and a recharging capacitor, and two pulse transformers with serially connected primary windings. In contrast to usually used in practice devices the suggested device allows producing 5-6 igniting pulses of increased power within each half-period of the alternating current.
 
 
Keywords: double-anode plasmatron, plasma-MIG welding, pulse transformer, pulse energy, device for ignition, componenting
 
 
Received:                07.07.08
Published:               28.02.09
 
 
References
1. (1978) Welding in machine building: Refer. Book. Vol. 1. Ed. by N.A. Olshansky. Moscow: Mashinostroenie.
2. Bakurskaya, M.A., Kolosova, N.A. (1984) Plasma-MIG process and its industrial application abroad. Elektrotekhn. Promyshlennost. Elektrosvarka, 6, 11-15.
3. Shchitsyn, Yu.B., Tytkin, Yu.M. (1985) Study of process of plasma consumable electrode welding of heat-resistant alloys. In: Proc. of 2nd All-Union Conf. on Problems of Welding Technology of Thermostable, Refractory and Heat-Resistant High-Alloy Steels and Alloys. Kiev: PWI.
4. Gvozdetsky, V.S., Makarenko, N.A. (2000) Plasma welding (Review). The Paton Welding J., 12, 24-28.
5. Vennekers, R., Shevers, A.A. (1977) Plasma MIG welding of copper and copper alloys. Welding and Metal Fabr., 45(4), 227-235.
6. Essers, W.G., Willemes, G.A. (1984) Plasma-MIG-Schweissen von Aluminium, Auftragschweissen und Zweielektrodenschweissen von Stahl. DVS-Berichte, 90, 9-14.
7. Danilchenko, B.V., Makarenko, N.A. (1998) Plasma-arc surfacing with axial feed of consumable flux-cored wire. In: Proc. of Int. Sci.-Techn. Conf. on Advanced Technique and Technology of Machine Building, Instrument Engineering and Welding Production. Kiev: PWI, 322-325.
8. Kornienko, A.N., Makarenko, N.A., Kondrashov, K.A. (2003) Advantages of strengthening and recovery of press molds for glass by plasma-MIG surfacing method. In: Proc. of Region. Sci.-Techn. Conf. Vol. 1. Mariupol: PGTU.
9. (1974) Technology of electric welding of metals and alloys. Ed. by B.E. Paton. Moscow: Mashinostroenie.
10. Makarenko, N.A. (2006) Development of scientific and technological bases of plasma consumable and nonconsumable electrode welding and surfacing: Syn. of Thesis for Dr. of Techn. Sci. Degree. Mariupol.
11. Shmakov, E.I., Fedotenkov, V.G., Kolesnik, G.F. et al. Device for exciting and stabilizing of arcing process. USSR author's cert. 567563. Int. Cl. B 23 K 9/06. Publ. 05.08.77.

---

Suggested Citation

N.A. MAKARENKO¹, V.V. CHIGAREV², N.A. GRANOVSKY², A.A. BOGUTSKY¹ and A.M. KUSHCHY¹ (2009) DEVICE FOR IGNITING ARC OF DOUBLE-ANODE PLASMATRON. The Paton Welding J., 02, 35-36.

---