The Paton Welding Journal, 2009, №03



2009 №03 (03)

2009 №03 (05)

---

TPWJ, 2009, #3, 15-17 pages

ROLE OF PROTECTIVE COATING OF ALUMINIUM ALLOY WELDED JOINTS IN FATIGUE RESISTANCE

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 3, 2009 (March)
Pages                      15-17
 
 
Authors
V.A. SHONIN, V.S. MASHIN, A.P. MURASHOV, V.I. ZELENIN, I.A. DEMIANOV, M.P. PASHULYA and V.M. TEPLYUK
E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Influence of thermal aluminium coating on mechanical properties of butt joints of AMg6 alloy with a longitudinal weld made by MIG welding and of the modulus of elasticity on the coating fatigue life was studied.
 
 
Keywords: load-carrying structures, welded joints, aluminium alloys, protective coating, modulus of elasticity, fatigue resistance
 
 
Received:                06.11.08
Published:               28.03.09
 
 
References
1. Abolikhina, E.V., Molyar, A.G. (2003) Corrosion of aluminium alloy structures. Fiz.-Khimich. Mekhanika Materialov, 6, 106-110.
2. (1972) Aluminium alloys. Commercial deformable, sintered and cast aluminium alloys: Refer. Book. Ed. by F.I. Kvasov, I.N. Fridlyander. Moscow: Metallurgiya.
3. (1971) Aluminium-handbuch. Berlin: VEB Verl. Technik.
4. (1972) Aluminium alloys. Application of aluminium alloys: Refer. Book. Ed. by A.T. Tumanov. Moscow: Metallurgiya.
5. Karlashov, A.V., Gnatyuk, A.D., Kardash, A.B. (1982) Corrosion-fatigue strength of aluminium alloys. In: Proc. of 1st Sov.-Engl. Seminar on Corrosion Fatigue of Metals. Kiev: Naukova Dumka, 206-229.
6. Kushnarenko, V.M. (1973) Resistance of AMg6 alloy welded joints under stress corrosion: Syn. of Thesis for Cand. of Techn. Sci. Degree. Moscow: N.E. Bauman MVTU.
7. Zverev, A.I., Kopetman, L.N. (1990) Influence of detonation coatings on fatigue resistance of parts. Poroshk. Metallurgiya, 5, 37-41.
8. Nejman, P. (1987) Physical metals science. Vol. 3. Moscow: Metallurgiya.
9. (1974) Aluminium alloys. Structure and properties of semifinished products from aluminium alloys: Refer. Book. Ed. by V.A. Livanov. Moscow: Metallurgiya.
10. Lyashenko, B.A., Kuriat, R.I. (2005) Coatings and their application in engineering. In: Strength of materials and structures. Kiev: Akademperiodika.
11. Dolgov, N.A. (2002) Influence of elastic modulus on serviceability of substrate-coating system. Problemy Prochnosti, 2, 66-72.
12. Hasui, A., Morigaki, O. (1985) Surfacing and spraying. Ed. by V.S. Stepin, N.G. Shesterkin. Moscow: Mashinostroenie.

---