The Paton Welding Journal, 2010, №01



2010 №01 (04)

2010 №01 (06)

---

TPWJ, 2010, #1, 19-23 pages
 
DEVELOPMENT OF THE TECHNOLOGY FOR FORMATION OF MECHANICAL AND GLUED-MECHANICAL JOINTS BY THE PUNCHING METHOD


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 1, 2010 (January)
Pages                      19-23
 
 
Authors
Yu.S. VASILIEV, L.S. PARSHUTINA and A.N. CHUKASHKIN
E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
The processes of formation of mechanical joints in thin-sheet materials with anticorrosive coatings by the punching method using glue compositions of different viscosities between the mating surfaces were investigated. The limiting values of rheological characteristics of the glues that affect formation of the glued-mechanical joints were established. The cold-cured highly filled glue composition on a silicon-polyurethane base, not preventing formation of the glued-mechanical joints, was developed. Press equipment based on a pneumatic actuator, providing a compression force of up to 20 kN, was developed and manufactured.
 
 
Keywords: mechanical joints, glued-mechanical joints, thin-sheet metal structures, forming technologies, hybrid glue compositions, filling compounds, polydisperse filling
 
 
Received:                ??.??.??
Published:               28.01.10
 
 
References
1. Alsman, M. (2001) Modern thin sheets with coatings for automobile construction. Chyorn. Metally, 6, 49-53.
2. Shavyrin, V.N., Ryazantsev, V.I. (1981) Glued-welded structures. Moscow: Mashinostroenie.
3. Hahn, O., Budde, L. (1990) Analyse und systematische Einteilung umformtechnischer Fuegeverfahren ohne Hilfsfuegeteil. Blech Rohre Profile, 37(1), 29-32.
4. Storozhev, M.V., Popov, U.A. (1977) Theory of pressure treatment of metals. Moscow: Mashinostroenie.
5. Hahn, O., Peetz, A. (1999) Improvement of the joint element properties through the combination of mechanical fasteners and adhesive bonding. Welding in the World, 43(3), 38-46.
6. Hahn, O., Wibbeke, T.-M. (2004) Einsatz von warmearmen Hybridfugetechnologien zum Verbinden duennwandiger Blechwerkstoffe. Schweissen und Schneiden, 11, 593-600.
7. Vasiliev Yu.S., Parshutina, L.S., Chukashkin, A.N. (2006) Development of gluing-welding methods for repair and strengthening of elements of industrial and transport structures. In: Problems of service life and safety of structures, constructions and machines. Kiev: PWI.
8. Anisimov, I.I., Bochkaryova, S.A., Desyatykh, V.I. et al. (2006) Efficient deformation-strength characteristics of polymer composition with discrete inclusions of different sizes. Fizich. Mezomekhanika, 2, 11-15.

---