Print

2011 №12 (09) 2011 №12 (02)

The Paton Welding Journal 2011 #12
The Paton Welding Journal, 2011, #12, 2-6 pages  

FORMATION OF LIQUID METAL FILM AT THE TIP OF WIRE-ANODE IN PLASMA-ARC SPRAYING

M.Yu. KHARLAMOV1, I.V. KRIVTSUN2, V.N. KORZHIK2 and S.V. PETROV2


1V. Dal East-Ukrainian National University, Lugansk, Ukraine
2E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
A mathematical model is proposed, describing formation of a molten metal film at the tip of sprayed anode-wire under the conditions of plasma-arc spraying of coatings. Numerical analysis of the influence of spraying mode parameters on the position of molten wire tip relative to plasma jet axis, thickness of liquid interlayer contained on the wire tip, temperature and velocity of metal flow in it was performed.
 
 
Keywords: plasma-arc spraying, coatings, wire-anode, spraying modes, thermal condition, molten metal film, mathematical model
 
 
Received:                ??.??.??
Published:               28.12.11
 
 
References
1. Korobov, Yu.S. (2004) Estimation of forces affecting the spray metal in electric arc metallizing. The Paton Welding J., 7, 21-25.
2. Korobov, Yu.S., Boronenkov, V.N. (2003) Kinetics of interaction of sprayed metal with oxygen in electric arc metallizing. Svarochn. Proizvodstvo, 7, 30-36.
3. Vakhalin, V.A., Maslenkov, S.B., Kudinov, V.V. et al. (1981) Process of melting and spraying of electrode material in electric arc metallizing. Fizika i Khimiya Obrab. Materialov, 3, 58-63.
4. Kharlamov, M.Yu., Krivtsun, I.V., Korzhik, V.N. et al. (2007) Mathematical model of arc plasma generated by plasmatron with anode wire. The Paton Welding J., 12, 9-14.
5. Kharlamov, M.Yu., Krivtsun, I.V., Korzhik, V.N. et al. (2011) Heating and melting of anode wire in plasma arc spraying. Ibid., 5, 2-7.
6. Lojtsyansky, L.G. (1973) Mechanics of fluid and gas. Moscow: Nauka.
7. Volkov, K.N. (2006) Boundary conditions on the wall and mesh dependence of the solution in turbulent flow calculation on unstructured meshes. Vychislit. Metody i Programmirovanie, 7(1), 211-223.
8. Wilcox, D.C. (1994) Turbulence modeling for CFD. La Canada: DCW Industries.
9. Kalitkin, N.N. (1978) Numerical methods: Manual. Moscow: Nauka.
10. Hu, J., Tsai, H.L. (2007) Heat and mass transfer in gas metal arc welding. Pt 2: The metal. Int. J. Heat and Mass Transfer, 50, 808-820.

Suggested Citation

M.Yu. KHARLAMOV1, I.V. KRIVTSUN2, V.N. KORZHIK2 and S.V. PETROV2 (2011) FORMATION OF LIQUID METAL FILM AT THE TIP OF WIRE-ANODE IN PLASMA-ARC SPRAYING. The Paton Welding J., 12, 2-6.