The Paton Welding Journal, 2012, №11



2012 №11 (11)

2012 №11 (02)

---

The Paton Welding Journal, 2012, #11, 2-5 pages  

BRAZING OF TITANIUM ALLOYS BY USING ALUMINIUM-BASE FILLER ALLOYS

V.F. Khorunov, V.V. Voronov and S.V. Maksymova

E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Investigations on brazing of titanium alloy samples by using different compositions of aluminium filler alloys were carried out. Silicon-free aluminium filler alloys were found to be acceptable for producing the brazed joints on titanium alloys. The 670-690 °C brazing temperature range is optimal for the selected filler alloys.
 
Keywords: brazing, titanium alloys, aluminium alloys, commercial brazing filler alloys, wetting, microstructure, mechanical properties
 
 
Received:                ??.??.??
Published:               28.11.12
 
 
References
 
1. Lashko, N.F., Lashko, S.V. (1977) Brazing of metals. Moscow: Mashinostroenie.
2. Wells, R.R. (1975) Low temperature large-area brazing of damage tolerant structure. Welding J., 54(10), 348-356.
3. Kimbal, C.E. (1980) Aluminum brazed titanium acoustic structures. Ibid., 59(10), 26-30.
4. Nesterov, A.F., Studenov, G.V. (1987) Brazing of overlap titanium joints with aluminium filler alloys. In: Proc. of Seminar on Increase in Quality and Efficiency of Welding Production at Moscow Enterprises (Moscow, 1987).
5. Nesterov, A.F., Dolgov, Yu.S., Telkov, A.M. (1985) Brazing of titanium structures with aluminium filler alloys. In: Filler alloys for brazing of current materials. Ed. by A.A. Rossoshinsky. Kiev: PWI.
6. Sokolova, N.M., Perevezentsev, V.N. (1989) Brazing with aluminium filler alloys: Progress. In: Advanceed brazing methods: Transact. Ed. by V.F. Khorunov. Kiev: PWI.
7. Shapiro, A.E., Flom, Y.A. Brazing of titanium at temperatures below 800 °C: Review and prospective applications. http://www.titanium-brazing.com/ publications/DVS-Manuscript_1020-Copy-19-07.pdf

---

Suggested Citation

V.F. Khorunov, V.V. Voronov and S.V. Maksymova (2012) BRAZING OF TITANIUM ALLOYS BY USING ALUMINIUM-BASE FILLER ALLOYS. The Paton Welding J., 11, 2-5.

---