The site is system work. If this page is not displayed correctly, you can view it on the site mirror: here

Print
DOI of Article
https://doi.org/10.15407/tpwj2015.06.31
2015 №06 (30) 2015 №06 (32)

TPWJ, 2015, #5-6, 140-141 pages

 
Effect of surfacing on stress-strain state of rollers of machines for continuous casting of billets
 
Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                      0957-798X (print)
Issue                       № 5/6, 2015 (May/June)
Pages                      140-141
 
 
Authors
A.P. Gopkalo And V.V. Klipachevsky
G.S. Pisarenko Institute for Problems of Strength, NASU. 2 Timiryazevskaya Str., 01014, Kiev, Ukraine. Е-mail: роstmaster@iрр.аdаm.kiev.ua
 
 
Abstract
The effect of ratio of physical and mechanical properties of the base and deposited metal on stress-strain state of rollers of machines for continuous casting of billets was considered using numerical modeling. It is shown that by varying the ratio of the coefficient of linear expansion and coefficient of thermal conductivity of base and deposited metals and their mechanical properties it is possible to control the value and sign of thermal stresses on the surface of rollers. 2 Ref., 2 Figures.
 
 
Keywords: roller, surfacing, temperature, stresses, deformation
 
 
Received:                29.04.15
Published:               28.07.15
 
 
References
1. Bulanov, L.V., Korzunin, L.G., Parfenov, E.P. et al. (2004) Machines for continuous casting of billets. In: Theory and calculation. Kazan: Ural center Marat.
2. (1967) Physical properties of steels and alloys applied in power engineering: Refer. Book. Ed. by B.E. Nejmark. Moscow-Leningrad: Energiya.