Eng
Ukr
Rus
Print
2016 №06 (09) DOI of Article
10.15407/tpwj2016.06.10
2016 №06 (11)

The Paton Welding Journal 2016 #06
TPWJ, 2016, #5-6, 59-62 pages

Systems for visualization of welding processes in real-time mode using noise-proof channel for transfer of secondary electron emission signal


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                      0957-798X (print)
Issue                       № 5-6, 2016 (May-June)
Pages                      59-62


Authors
V.A. Matvejchuk
E.O. Paton Electric Welding Institute, NASU 11 Kazimir Malevich Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua


Abstract
Noise-proof digital systems were developed for processing, transfer and input into computer of a secondary electron emission signal with visualization of welding processes in real-time mode. The equipment was developed for conversion, transfer and processing of the secondary electron emission signal, namely block of processing, conversion and transfer of the secondary electron emission signal; block of input and decoding of the digital electron secondary emission signal; block of processing, conversion and transfer of the secondary electron emission signal via Ethernet. Video monitoring systems using the equipment for conversion and transfer of the signal and equipment for conversion and information transfer into computer were developed and tested. Software was designed. The investigations of developed video monitoring system were carried out, their comparative analysis with video monitoring system RASTR, widely used in the units for electron beam welding, were performed. 6 Figures.

Keywords: electron beam welding, interference immunity, electron beam, secondary electron emission, video monitoring, image


Received:                11.05.16
Published:               19.07.16


References



>