Eng
Ukr
Rus
Print
2018 №07 (06) DOI of Article
10.15407/tpwj2018.07.07
2018 №07 (01)

The Paton Welding Journal 2018 #07
TPWJ, 2018, #7, 33-35 pages
 
Experimental study of slag and metal pool rotation during the electroslag process in current-supplying mould

Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                      0957-798X (print)
Issue                       #7, 2018 (July)
Pages                      33-35
 
 
Authors
Yu.M. Kuskov and V.G. Soloviov
E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
 
Experiments on studying the rotation of slag and metal pools during the electroslag process in current-supplying mould were conducted. It was found that metal pool rotation can occur both due to the forces of friction from the rotating slag pool, and due to electromagnetic forces applied to the molten metal. Operating current, passing through the mould current-conducting section, has a decisive influence on generation of the rotating effect. 13 Ref., 1 Table, 3 Figures.
Keywords: rotation, slag and metal pools, electroslag process, current-supplying mould
 
Received:                07.05.18
Published:               31.07.18
 
 
References
1. Trochun, I.P., Chernysh, V.P. (1965) Magnetic control of solidification in electroslag process. Proizvodstvo, 11, 3–5 [in Russian].
2. Topilin, V.V., Klyuev, M.M., Fomicheva, N.P. et al. (1968) Refinement of microstructure of ingots in electroslag remelting of alloys. Elektrometallurgiya, 1, 23–28 [in Russian].
3. Paton, B.E., Medovar, B.I. (eds) (1986) Metallurgy of electroslag process. Kiev, Naukova Dumka [in Russian].
4. Maksimovich, B.I. (1962) Influence of electromagnetic rotation of slag pool on solidification of metal in electroslag remelting of high-alloy steels and alloys. Elektrotermiya, 5, 9–12 [in Russian].
5. Kompan, Ya.Yu., Shcherbinin, E.V. (1989) Electroslag welding and melting with controlled MGD-processes. Moscow, Mashinostroenie [in Russian].
6. Protokovilov, I.V., Porokhonko, V.B. (2015) Physical modeling of process of consumable electrode melting in ESR under conditions of external magnetic action. Elektrometall., 1, 8–12 [in Russian]. https://doi.org/10.15407/sem2015.01.01
7. Ksyondzyk, G.V., Frumin, I.I., Shirin, V.S. (1964) Currentsupplying mould. USSR author’s cert. 264427 [in Russian].
8. Ksyondzyk, G.V., Frumin, I.I., Shirin, V.S. (1969) Device for electroslag remelting. USSR author’s cert. 337026 [in Russian].
9. Ksyondzyk, G.V. (1975) Current-supplying mould providing rotation of slag pool. Elektrometallurgiya, 27, 32–40 [in Russian].
10. Kuskov, Yu.M., Skorokhodov, V.N., Ryabtsev, I.A. et al. (2001) Electroslag surfacing. Moscow, OOO «Nauka i Tekhnologii» [in Russian].
11. Kuskov, Yu.M. (1996) Electroslag surfacing of cylindrical billets with liquid filler material in current-supplying mould. Svarka, 6, 52 [in Russian].
12. Medovar, B.I., Chernets, A.V., Medovar, L.B. et al. (1995) Electroslag surfacing with liquid filler metal. Spets. Elektrometallurgii 1, 6–11 [in Russian].
13. Medovar, B.I., Chernets, A.V., Medovar, L.B. et al. (1997) ESS LM as a method for producing of thin structure of deposited layer from rapid steel. Ibid., 1, 3–4 [in Russian].
>