Eng
Ukr
Печать
2008 №02 (07) 2008 №02 (09)

Современная электрометаллургия 2008 #02
Журнал «Современная электрометаллургия», № 2, 2008 г., с. 49-51

О растворении твердых частиц TiN в жидком титане во время плавки

Г.М. Григоренко, Ю.М. Помарин, В.Ю. Орловский, В.В. Лакомский, Н.Н. Калмюк, И.И. Алексеенко

Ин-т электросварки им. E. О. Патона HAH Украины. Киев

Реферат
Исследовано взаимодействие жидкого титана с тиглем из нитрида титана при температуре 2000 и 2100 °С. Показано, что при такой температуре идет интенсивное взаимодействие материала тигля с жидкой ванной. Полученные результаты дают основания предполагать возможность растворения твердых частиц нитрида титана в жидком титане.
The interaction of molten titanium with a crucible, macle from titanium nitride, at 2000 and 2100 °С temperature was investigated. It is shown that an intensive interaction of a crucible material with a molten pool takes place at these temperatures. The obtained results give grounds to assume the feasibility of dissolution of hard particles of titanium nitride in a molten titanium.
Ключевые слова: титан; нитрид титана; растворение; индукционный нагрев

Список литературы

1. Nitride inclusions in titanium ingots , J. L. Henry. S. D. Hill. J. L. Schaller. T. T. Cambell // Metall. Trans. — 1973. - K° 4. - P. 1859-1864.
2. Bakish R. The state of the art in electron beam melting and refining / J. of Metals. — 1991. — 43. — P. 42-44.
3. Tripp D. IV., Mitchell A., Hayden M. The effect of power on the thermal regime in an EB hearth / / Proc. conf, on electron beam melting and refining (State of the Art 1986, Bakish Material Corporation. Englewood). — New Jersey, 1986. - P. 30-44. ' '
4. Numerical simulation of the EBCHR process / Bellot J. P.. Floris E.. Jardy A.. Ablitzer D. // Ibid. — New Jersey, 1993. - P. 139-152. ‘
5. Bellot J. P., Mitchell A. Hard-alfa particle behavior in a titanium alloy liquid pool // Light Mettals. — 1994. — № 2. - P. ‘1187-1193. ‘
6. Ахонин С. В. Математическое моделирование процесса растворения включений TiN в расплаве при ЭЛП // Пробл. спец, электрометаллургии. — 2001. — К» 1. — С. 20-24. '
7. Jarret R. N. Removal of defect from titanium alloys with E.B.C.H.R. // Proc, of the conf, on electron beam melting and refining (State of the Art 1986, Bakish Material Corporation. Englewood). — New Jersey. 1986. — P. 332-346.
Эта статья в открытом доступе по Creative Commons Attribution Non-Commercial 4.0 International (CC-BY-NC).